4K HDMI over CAT5e/6 HDBaseT Extender Tx + Rx Kit. 10.2Gbps Bandwidth. IR Emitter and Sensor Included.

Categories: , ,

Product Description


  • Inputs Tx (Each): 1 HDMI, 1 IR In

  • Outputs Tx (Each): 1 CAT5e/6 UTP/STP, 1 IR Out /RS-232 Bi-Directional

  • Inputs Rx (Each): 1 CAT5e/6 UTP/STP, 1 IR In

  • Outputs Rx (Each): 1 HDMI, 1 IR Out /RS-232 Bi-Directional

  • DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL)

  • HDMI Video/Audio Signal: Input Video Signal: 1.2 Volts p-p

  • HDMI Connector: Type A, 19 Pin Female

  • RJ45 Connector: Shielded Link Connector, HDBaseT

  • IR In Connector: Phoenix Connectors

  • IR Out (RS-232) Connector: Phoenix Connectors


  • Regulation: CE, RoHS, WEEE

  • Enclosure: Black Metal

  • Product (Each): 4.1” x 2.8” x 0.875”, Weight: 0.75 lbs

  • KD-X222 Power: (2) KD-PS5V2ASC, 5V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector

  • KD-X222PO Power (Tx Only): KD-PS12V2ASC, 12V/2A, 100-240VAC, 50-60Hz, Interchangeable head with screw-in connector


  • HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length

  • Power over HDBaseT: Tx unit powers Rx unit. Only one power connection needed.

  • Signal Extension:

    • Up to 150 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using CAT6A cabling

    • Up to 125 ft. @ 4K 24/25/30(4:4:4)/60(4:2:0) using CAT5e/6 UTP/STP cabling

    • Up to 250 ft. @ 1080p /1920×1200 using CAT6A cabling

    • Up to 230 ft. @ 1080p /1920×1200 using CAT5e/6 UTP/STP cabling

  • HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant

  • HDR (High Dynamic Range): HDR is achieved with AppleTV source at 4K/30 [4:2:2] 12bit deep color, enabling more life-like images through a greater range of luminance levels.

  • 4K/UHD Resolution: Supports signals up to 4096×2160 60Hz [4:2:0] 8bit, 4096×2160 30Hz [4:2:2] 12bit, and 4096×2160 30Hz [4:4:4] 8bit

  • Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit

  • 3D: Support for standard 3D stereoscopic signal formats

  • Low Profile: Super slim chassis design

  • HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60f/s

  • EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected via Rx

  • Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices

  • Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug control

  • IR Sensor: Sensor powering via +5V on Rx unit’s IR In port collects line-of-sight IR from remote(s) without external IR connecting block

  • Up/Down IR: Two channels of IR enable control to/from devices connected to Tx and Rx units

  • RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector

  • Rotary Switch RS-232 Control Mode: Provides control of Tx unit as well as connectivity status

  • Surround Sound Audio: Supports Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™ multi-channel audio formats

  • CEC Support: For inter-device control between input and output HDMI channel

  • I2C Communication: EDID and HDCP authentication to Display and Source

  • Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control®, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.