-
Ethernet Adapters and Extenders, Industrial Instruments, Test & Measurement
SFP to SFP Media Converters
Protocol Transparent Fiber Mode Conversion
SFP to SFP Media Converters are used to interconnect two fiber connections back to back. Because they are protocol independent, they are not limited to specific data types and can pass all protocols, including, but not limited to: Ethernet, SDI, Video, Fibre Channel, ATM/SONET OC-X, SDH STM-X, and FDDI.. Additionally, they support SFP transceivers with data rates up to 4.25 Gbps.
-
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-USB / 2
USB-CAN interface for USB 2.0
Powerful CAN-USB interface for PCs
The CAN-USB / 2 module is an intelligent CAN interface with an ARM 7 microcontroller that takes over the local data management of the CAN data. The module supports the USB 2.0 high-speed interface with data rates of 480 Mbit / s. -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model ECS-PCIe / FPGA
PCI Express® EtherCAT® slave interface
Turn your PCI Express system into an EtherCAT slave device
Expand your PCI Express system with EtherCAT slave (ECS) functions
The memory area of the EtherCAT slave controller is mapped directly in the PCI Express address space.Easy configuration and fast application development
Simple configuration with the esd EtherCAT master or other EtherCAT masters
Example of an EtherCAT slave information file (ESI file in XML format) included
esd EtherCAT slave API library and sample code for a quick introduction to application development are included in the scope of deliveryBus master support
The FPGA supports bus master DMA to relieve the CPU of copying the process image output data to the host memory. This function is used by the esd EtherCAT slave stack.
Customization on request -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-PCIe / 402
PCI Express® board with up to 4 CAN or CAN FD interfaces
Single Lane PCIe board with Altera FPGA for up to 4x CAN (FD)
CAN bit rates from 10 kbit / s up to 1 Mbit / s
PCIe® interface according to PCI Express specification R1.0a
MSI (Message Signaled Interrupts) support
CAN termination can be activated on-board
Comprehensive operating system support and extended CAN diagnostics
Software drivers and support for higher protocols for Windows®, Linux®, VxWorks®, QNX®, RTX, RTX64 and other operating systems -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-PCI / 400
2 or 4 channel PCI-CAN interface card (Layer 2, CANopen®, J1939 or ARINC825)
PCI plug-in card for up to 4x CAN
2x or 4x high-speed CAN interfaces according to ISO 11898-2
PCI interface according to PCI Local Bus Specification 2.2
esd Advanced CAN Core (esdACC) technologyBus mastering and local data management via FPGA
Software drivers for Windows® and Linux® included free of charge in the scope of delivery
Real-time operating systems and higher-layer protocols CANopen, J1939 and ARINC825
Software drivers for Windows, Linux, VxWorks®, QNX®, RTX, On Time RTOS-32 and other operating systems
CANopen, J1939 and ARINC825 protocol libraries available
Extended CAN diagnostics
Extended diagnostic functions
Supports CAN error simulation, e.g. CAN error injection
High resolution hardware timestamp
Powerful interface for PCs -
Battery Analyzers, Battery Testers and Chargers, Test & Measurement
IT5100 Battery Tester
IT5100 series is a series of battery internal resistance testers with high precision, high resolution and high speed. IT5100 adopts AC 4-terminal sensing, that means the tester can test internal resistance and voltage simultaneously with high precision. Resistance resolution is down to 0.1 μΩ, voltage resolution is 10 μV.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
Model IT8600 AC Electronic Load
IT8600 is ITECH latest series of AC/DC electronic loads with power range 0~14.4 kVA and adjustable frequency 45 Hz ~ 450 Hz. The unique oscilloscope waveform display function of IT8600’s can display input voltage & current as waveform.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
Model IT-M3300 Regenerative DC Electronic Load
IT-M3300 regenerative DC electronic load can not only simulate various load characteristics, but also can feed back electrical energy to the local grid instead of heat. With high power density design, it can provide up to 800W power absorption with tiny body of only 1U half-rack.
-
AC Power Sources, Power Sources & Measurement, Test & Measurement
Model IT7900 Regenerative Grid Simulator
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc.
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
Model IT-M3200 High Precision Programmable DC Power Supply
IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
IT6000B Regenerative Power System
ITECH launches a new incorporated product–IT6000B series. IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one.
IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW.
-
General Laboratory Instruments, Signal Generators, Function and Arbitrary, Test & Measurement
TOE 7741
TOELLNER Model TOE 7741 Function Generator
- Frequency range 1 mHz to 100 kHz
- High output power > 63 W into 8 Ohm
- Max. output amplitude 45 Vpp
- Output with feedback voltage protection
- Frequency counter up to 30 MHz
-
General Laboratory Instruments, Signal Generators, Function and Arbitrary, Test & Measurement
TOE 7761
TOELLNER Model TOE 7761 Arbitrary Function Generator
- 1 μHz to 40 MHz sine and square waveforms
- Output amplitude up to 20 Vss
- 80 MS/s sampling rate with arbitrary waveforms with 14 bit resolution and up to 1 000 000 sampling points
- Flash memory for 1 000 000 sampling points
- Many standard waveforms assist in creating arbitrary waveforms
- Various modulation and sweep options
- 50 instrument configurations can be stored
- Remote control via USB-1), GPIB- and RS-232 interface
-
Amplifier Wideband, General Laboratory Instruments, Test & Measurement
TOE 7607
TOELLNER Model TOE 7607 Broadband Amplifier
- High output voltage of up to 40 Vpp into 50 Ohm
- Wide frequency range from DC to 5 MHz
- Gain of up to 26 dB
- Small distortion factor
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
TOE 8800
TOELLNER Series TOE 8800 Arbitrary Power Supplies from 160 W to 5200 W
Single-Output and Dual-Output Power Supplies up to 400 W
- Generates any voltage and current characteristics
- Imports real-time signals from digital storage oscilloscopes or data recording systems
- Very high rise and fall rates of the output voltage: approx. 2 V/μs
- Brief load currents up to 1000 A
- User-friendly software
- GPIB and analog interfaces included as standard
- Vehicle electrics ripple: AC superimposition 4 Vpp
- 20 Hz to 70 kHz (TOE 8815 to TOE 8865)
- 20 Hz bis 50 kHz (TOE 8865 to TOE 88165)
- Internal sink function Brief load sink: 1000 W to 16000 W, depends on model
- Brief load current: 3 x Irated for approx. 10 ms (max. 1000 A)
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
TOE 8950
TOELLNER Models TOE 8951 / TOE 8952
Single-Output and Dual-Output Power Supplies up to 400 W
- Automatic setting to the existing line voltage: 115 V or 230 V, 47 to 63 Hz
- Autoranging
- RS 232 and analog interfaces included as standard
- USB, LAN, and GPIB interfaces optional
- Outputs at front and rear as standard
- On/off switching of the outputsge
- ½ 19“ weight, 2 HU design parallel installation possible
- Sensing
- Free LabView™ driver
- Can be used as constant voltage, constant current and constant power source (CV/CC/CP)
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
TOE 8730
TOELLNER Series TOE 8730 Multichannel DC Power Supplies 150 W
- Dual-output, triple-output and quintuple-output power supplies
- Extremely low residual ripple < 50 μV
- Electrically decoupled outputs
- Precise digital displays
- Analog remote control
- Resolution up to 1 mA
-
Radio Frequency & Microwave, RF & Microwave Spectrum and Vector Analyzers, Test & Measurement
Saluki S3502
Saluki S3502 series spectrum analyzer is adopted with the compact portable box structure, which has advantages of small size, light weight, low power consumption and convenient carrying. The S3502 series spectrum analyzer series currently consists of four types of products.
