PRO47TL
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- Quiet, fixed-placement, long-life gooseneck
- 3.0 m cable permanently attached between microphone and XLRM connector
- Requires 9V to 52V DC phantom power
Product Description
UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic’s self-contained electronics eliminate the need for external power modules. The PRO44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance.
- Low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25′ (7.6 m) detachable cable (TA3F to XLRM-type)
Specifications
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 70 – 16,000 Hz |
| Open Circuit Sensitivity | -37 dB (14.1 mV) re 1V at 1 Pa |
| Impedance | 100 ohms |
| Maximum Input Sound Level | 134 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range | 106 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 66 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 9-52V DC, 2 mA typical |
| Weight | 67 g |
| Dimensions | 15.79″ (401.0 mm) long, 0.47″ (12.0 mm) head diameter |
| Output Connector | 3-pin XLRM-type on cable |
| Cable | 9.8′ (3.0 m) cable permanently attached between microphone and XLRM-type connector |
| Accessories Included | AT8146 windscreen; AT8425 5/8″-27 threaded mounting stud |