-
ATE Systems, Test & Measurement, VXIbus Instruments
VM3616A 16-CHANNEL, 16-BIT DAC/WAVEFORM GENERATOR
- 16 independent 16-bit D/A converters per instrument for high speed signal generation
- Up to 48 D/A converters per VXIbus C-Size slot
- ±20V and ±10V output ranges
- Up to 100 kSa/s Arbitrary Waveform Generation with internal programmable clock
- FIFO mode allows high-speed uninterrupted data output
- Data storage and scan lists speed testing
- Extensive triggering capability
- SCPI compatible
- VXIplu&play drivers
-
ATE Systems, Test & Measurement, VXIbus Instruments
SVM2608 FOUR INDEPENDENT 100 KSA/S A/D CONVERTERS, SINGLE WIDE VME
- Four Independent 100kSa/s A/D Converters
- Option to Add Two Independent 20MSa/s A/D Converters
- On-Board FIFO for Streaming to Disk
- 1 MSa Memory per Channel for Burst Captures
- 2/4 Wire Resistance Measurements
- Robust Built-In Measurement Function
- VME 32/64
- Hermetically Sealed for Salt, Sand and Dust
-
ATE Systems, Test & Measurement, VXIbus Instruments
VM2710A 6.5 DIGIT DMM
- Auto-ranging 6.5 digit DMM
- DCV, ACV, DCI, ACI, 2- and 4-wire ohms
- Up to 2000 readings/sec over the backplane
- FIFO Memory for continuous measurements
- Two balanced differential isolated inputs
- Up to 256,000 readings of on-board memory
- Message or register data access
- Min/max, limit features, math (y=mX+b)
- High common mode rejection
- VXIplug&play drivers
-
ATE Systems, Test & Measurement, VXIbus Instruments
VM9000 VMIP BASE UNIT (HOLDS THREE INSTRUMENTS)
- Makes a single VXIbus card slot three times more powerful than single device solutions
- Designed for high performance instrumentation
- Open-platform, allowing product design with mixed or matched instruments provided by other suppliers
- Reduces the size and cost of test and data acquisition
-
ATE Systems, Test & Measurement, VXIbus Instruments
CT-310A 5-SLOT VXIBUS MAINFRAME (FOR RACK AND PORTABLE USE)
- Designed for portability and cost with small portable footprint
- Lightweight (under 22 lbs. including power supplies)
- Can house up to twelve VXIbus Instruments (VMIP™)
- Field-replaceable power supply and fan subassembly for low MTTR
- Remote isolated on/off control
- +5V and +12V are available for powering the UUT and other external devices
-
ATE Systems, Test & Measurement, VXIbus Instruments
CT-100C 6-SLOT VXIBUS MAINFRAME
- Cost-effective VXIbus Solution
- Enhanced monitoring capabilities including temperature and power monitoring
- Fault Output Signals Available on Rear Panel
- Removable Cover. Access to Instruments During Product Development or Instrument Calibration
- Adjustable Fan Speed
- Modular Fan/Power Supply Assembly Reduces MTTR
-
ATE Systems, Test & Measurement, VXIbus Instruments
EX2500A LXI-VXI GIGABIT ETHERNET SLOT-0 INTERFACE
- Up to 10 kM distance from PC to mainframe through fiberoptic interface
- 40 MB/s block transfer rates
- Embedded Web Interface provides interactive utility to control instruments
- Rack-Rack TTL trigger extension through on-board LXI Trigger Bus
- Backward compatibility with VXI 1.4 and 2.0 products
- External Clock In/Out with on-board options for TCXO/OCXO
- VXIplug&play compliant