SONIA

DATASHEET

Categories: ,

Product Description







Hear clearly, wherever you are.
Bring everyone into the discussion.








The Problem
In larger collaboration spaces such as conference rooms and classrooms, soundbars and speakers near the display won’t adequately cover the space. Room users closer to the display will endure an unpleasant volume level while those at the back may not hear at all.













The Solution
Distributed speakers, such as the Sonia Series, enable you to locate speakers evenly across the space to cover a smaller area with each device — making overall volume lower, more comfortable, and removing echos and booms. Now, those at the front and back of the room can hear the same — with comfort.






Keep your room clear.
Sonia Amp mounts directly onto Sonia C5 for invisible, in-ceiling installation. The entire configuration eliminates in-room amplifier racks and hefty, expensive copper cable — and, Sonia C5 includes double-stepped, long travel mount ears for blind installation from below the ceiling.






Simply connected.
Sonia Amp is designed for the modern collaboration space and includes a built-in network switch, enabling you to power an external ceiling microphone array direct from the device. That’s just one CatX drop to the ceiling for your entire AV system.





Sonia Amp – centralized control.
Running like a standard IT appliance, Sonia Amp enables centralized monitoring, management and control without the cost of individually-addressable speakers.With fault sensing between Sonia C5 speakers and the Sonia Amp, and dedicated VoiceMatch™ settings in each Xilica processor, end-users benefit from the same core functionality as an IP speaker without the expense.


















FEATURES



  • Power-over-Ethernet

    PoE+ to IEEE 802.3at, Class 4


  • Power Consumption

    30W maximum


  • Power Output

    Four (4) channel, 15W/channel maximum (without Mic port in use);
    Four (4) channel, 6W/channel maximum (with Mic port in use)


  • Microphone Port Power

    PoE to IEEE 802.3af, Class 0;
    15W maximum, 10W typical


  • Operating Temperature

    32-104⁰F (0-40⁰C)


  • Cooling

    Convection cooling, no fan


  • Humidity

    0-95% relative humidity, non-condensing


  • Connectivity

    LAN: (1) RJ45, PoE+ powered;
    Microphone: (1) RJ45, PoE power for microphone array, pass-through network to LAN port;
    Speaker(s): (4) RJ45, amplified audio out to Sonia C5


  • Audio Networking

    Dante™ with AES67-compliance, four (4) output channels


  • Amplifier Type

    Class D


  • Amplifier Power

    Single channel: 15W;
    Dual channel: 7W;
    Four channel: 3W


  • Frequency Response (20Hz-20kHz)

    +/- 1dB


  • Sample Rate

    48kHz


  • Dynamic Range (20Hz-20kHz BW)

    >90dB


  • THD+N (20Hz to 22kHz)

    <0.3%


  • Intermodulation Distortion (SMPTE)

    <0.3%


  • Crosstalk (Channel-to-Channel at 1kHz)

    <-90dB


  • Controls, Service & Indicators

    Reset: Momentary tactile button;
    Status: RGB LED indicator;
    LAN (PoE+)/Mic (PoE) RJ45 indicators: Green (left) – Link Status, On = Link Established; Off = No Link; Green (right) – Blink on data activity;
    Sonia C5 RJ45 indicators: One (1) Sonia C5 connected to RJ45 (8 Ohm load detected) – Left green light (on), right green light (on); Two (2) Sonia C5s connected to RJ45 (4 Ohm load detected) – Left green light (on), right green light (off)


  • Finish

    Matt black with ruggedized coating; labels in white


  • Weight

    1 kg / 2.2 lbs


  • Dimensions (HxWxD)

    1.0″ x 7.5″ x 4.0″ (25 x 191 x 102mm)


  • Mounting

    Mounts onto the backcan of any Sonia C5 speaker; mounts onto any flat surface


  • Compliance

    CE; FCC Part 15B; RoHS; WEEE


  • Warranty

    Xilica Five Year Limited Warranty


  • Part Number(s)

    2200-007-0101