PRO44
PRO44
UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
- Very low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25′ (7.6 m) detachable cable (TA3F to XLRM-type)
- Dimensions 73mm x 90.5mm x 15mm
Product Description
UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
With its half-space unidirectional polar pattern, low-profile design, and outstanding sound quality, the PRO44 is ideal for conference tables, podiums, lecterns and other installed-sound uses. This versatile boundary mic’s self-contained electronics eliminate the need for external power modules. The PRO44 is equipped with a wide-range condenser element with low-mass diaphragm for superior performance.
- Low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm for superior performance
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25′ (7.6 m) detachable cable (TA3F to XLRM-type
Specifications
Element | Condenser |
Polar Pattern | Half-cardioid (cardioid in hemisphere above mounting surface) |
Frequency Response | 70 – 16,000 Hz |
Open Circuit Sensitivity | -25dB (56.2mV) re 1V at 1 Pa |
Impedance | 100 ohms |
Maximum Input Sound Level | 114 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 86 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 66 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 9-52V, 2 mA typical |
Weight | 67 g |
Dimensions | 2.87″ (73.0 mm) maximum width, 3.56″ (90.5 mm) maximum length, 0.59″ (15.0 mm) height |
Output Connector | Integral 3-pin XLRM-type |
Cable | 25′ (7.6 m) long, with TA3F and XLRM-type connectors |