PRO42

PRO42

MINIATURE UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE

  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 7.6 m cable permanently attached between microphone and XLRM connector
  • Dimensions 36.6mm x 54.3mm x 15.5mm

imgres

Categories: , , , ,

Product Description

MINIATURE UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE


The PRO42’s low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

  • Very low-profile design for minimum visibility

  • Wide-range condenser element with low-mass diaphragm for superior performance

  • Uniform polar pattern for maximum rejection of unwanted sounds

  • Rugged design and construction

  • 25′ (7.6 m) cable permanently attached between microphone and XLRM-type connector

Specifications
























































Element Condenser
Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response 70 – 14,000 Hz
Open Circuit Sensitivity -38dB (12.5mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 105 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 9-52V DC, 2 mA typical
Weight 35 g
Dimensions 1.44″ (36.6 mm) maximum width, 2.14″ (54.3 mm) maximum length, 0.61″ (15.5 mm) height
Output Connector Integral 3-pin XLRM-type
Cable 25′ (7.6 m) long, permanently attached