Showing 73–81 of 337 results

View
Filters:

  • , ,

    Model LI5600

    Lock-in Amplifiers that measure extremely small alternating signals hidden deep within noise, are used in a wide range of advanced research fields, including scanning probe microscopes, terahertz spectroscopy and spintronics.

    NF's newest lock-in amplifier LI5600 series is 2-phase, 2-frequency digital lock-in amplifier that delivers a high level of stability with post-phase detection digital signal processing. The series covers all areas of key functionality required for increasing reliability when measuring very small signals, such as an outstanding dynamic reserve up to 100 dB, update rates up to approximately 1.5 M samples/s (LI5660/LI5655), and smooth, high-speed 16-bit amplitude resolution output response.

    Learn more

  • , ,

    SFL Series

    SFL Series DC Electronic Load, is capable for 300W/1000W. Its fast-current feedback control helps to reduce current overshoot during rise-up. The minimum operation voltage is not restricted in which can help the current to flow from 0A up to set-current proportionally, just like “electronic resistor”.
    Several operation modes are also available, such as CC (Constant Current), CV (Constant Voltage), CP (Constant Power), to simulate many kinds of load test conditions for customer application

    Learn more

  • , ,

    GenesysTM

    TDK-Lambda Genesys™ Series sets the standard for flexible, reliable, AC-DC power systems in OEM, Industrial and Laboratory applications with the highest power density in 1U, 2U or 3U sizes at a competitive price.

    Features:
    Highest Power Density Available
    Available in 1U, 2U or 3U sizes
    Wide Range Input
    Active Power Factor Correction
    Built-in RS-232 & RS-485 Interface
    Last Setting Memory
    Five Year Warranty

    Learn more

  • , ,

    Brand Z+

    Brand Z+ series of 2U height bench top CVCC programmable DC power supplies, output voltage up to160 VDC, 320 VDC, and 650 VDC.

    Learn more

  • , ,

    IOLAN SCG R/U

    Perle IOLAN SCG R/U Console Servers provide data center managers with secure remote console management of any device with an RS232 RJ45 or USB console port. With an expandable modular hardware platform, advanced security features, and built-in redundancy features, your IT professionals and network operations center (NOC) personnel will have everything they needed to easily perform secure remote data center management and out-of-band management of IT assets from anywhere in the world. The unique design also provides users with a flexible, cost-effective solution to transmit data from mission critical equipment over Copper or Fiber based Ethernet networks.

    Learn more

  • , ,

    eXP-S1110

    Perle eXP-S1110 PoE Gigabit Ethernet Extenders transparently extend Ethernet beyond the general IEEE 802.3af limits of 328ft / 100m while providing Power over Ethernet ( PoE ) to standards-based compliant devices such as IP cameras, VoIP phones and wireless access points.

    Learn more

  • , ,

    SFP to SFP Media Converters

    Protocol Transparent Fiber Mode Conversion
    SFP to SFP Media Converters are used to interconnect two fiber connections back to back. Because they are protocol independent, they are not limited to specific data types and can pass all protocols, including, but not limited to: Ethernet, SDI, Video, Fibre Channel, ATM/SONET OC-X, SDH STM-X, and FDDI.. Additionally, they support SFP transceivers with data rates up to 4.25 Gbps.

    Learn more

  • , , , ,

    Model CAN-USB / 2

    USB-CAN interface for USB 2.0
    Powerful CAN-USB interface for PCs
    The CAN-USB / 2 module is an intelligent CAN interface with an ARM 7 microcontroller that takes over the local data management of the CAN data. The module supports the USB 2.0 high-speed interface with data rates of 480 Mbit / s.

    Learn more

  • , , , ,

    Model ECS-PCIe / FPGA

    PCI Express® EtherCAT® slave interface
    Turn your PCI Express system into an EtherCAT slave device
    Expand your PCI Express system with EtherCAT slave (ECS) functions
    The memory area of the EtherCAT slave controller is mapped directly in the PCI Express address space.

    Easy configuration and fast application development
    Simple configuration with the esd EtherCAT master or other EtherCAT masters
    Example of an EtherCAT slave information file (ESI file in XML format) included
    esd EtherCAT slave API library and sample code for a quick introduction to application development are included in the scope of delivery

    Bus master support
    The FPGA supports bus master DMA to relieve the CPU of copying the process image output data to the host memory. This function is used by the esd EtherCAT slave stack.
    Customization on request

    Learn more