-
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-PCIe / 402
PCI Express® board with up to 4 CAN or CAN FD interfaces
Single Lane PCIe board with Altera FPGA for up to 4x CAN (FD)
CAN bit rates from 10 kbit / s up to 1 Mbit / s
PCIe® interface according to PCI Express specification R1.0a
MSI (Message Signaled Interrupts) support
CAN termination can be activated on-board
Comprehensive operating system support and extended CAN diagnostics
Software drivers and support for higher protocols for Windows®, Linux®, VxWorks®, QNX®, RTX, RTX64 and other operating systems
-
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-PCI / 400
2 or 4 channel PCI-CAN interface card (Layer 2, CANopen®, J1939 or ARINC825)
PCI plug-in card for up to 4x CAN
2x or 4x high-speed CAN interfaces according to ISO 11898-2
PCI interface according to PCI Local Bus Specification 2.2
esd Advanced CAN Core (esdACC) technologyBus mastering and local data management via FPGA
Software drivers for Windows® and Linux® included free of charge in the scope of delivery
Real-time operating systems and higher-layer protocols CANopen, J1939 and ARINC825
Software drivers for Windows, Linux, VxWorks®, QNX®, RTX, On Time RTOS-32 and other operating systems
CANopen, J1939 and ARINC825 protocol libraries available
Extended CAN diagnostics
Extended diagnostic functions
Supports CAN error simulation, e.g. CAN error injection
High resolution hardware timestamp
Powerful interface for PCs -
Battery Analyzers, Battery Testers and Chargers, Test & Measurement
IT5100 Battery Tester
IT5100 series is a series of battery internal resistance testers with high precision, high resolution and high speed. IT5100 adopts AC 4-terminal sensing, that means the tester can test internal resistance and voltage simultaneously with high precision. Resistance resolution is down to 0.1 μΩ, voltage resolution is 10 μV.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
Model IT8600 AC Electronic Load
IT8600 is ITECH latest series of AC/DC electronic loads with power range 0~14.4 kVA and adjustable frequency 45 Hz ~ 450 Hz. The unique oscilloscope waveform display function of IT8600’s can display input voltage & current as waveform.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
Model IT-M3300 Regenerative DC Electronic Load
IT-M3300 regenerative DC electronic load can not only simulate various load characteristics, but also can feed back electrical energy to the local grid instead of heat. With high power density design, it can provide up to 800W power absorption with tiny body of only 1U half-rack.
-
AC Power Sources, Power Sources & Measurement, Test & Measurement
Model IT7900 Regenerative Grid Simulator
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc.
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
Model IT-M3200 High Precision Programmable DC Power Supply
IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
IT6000B Regenerative Power System
ITECH launches a new incorporated product–IT6000B series. IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one.
IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW.
-
EXTENDER, Multimedia, USB, USB Extenders
KD-XUSB2
USB 2.0 over CAT maximum 50M Extender, 2×1 USB A to B HUB, any CAT5e/6 cable length up to 50m, RJ45 interface for CAT5e/6, Support Video, Audio, KVM and generic USB connectivity
