-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701931 CURRENT PROBE 2 MHZ / 500 ARMS
- Frequency bandwidth: DC to 2 MHz
- Maximum continuous input range: 500 Arms
- Functions with Digital Oscilloscopes, Scopecorders and other waveform measuring instruments.
-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701930 CURRENT PROBE 10 MHZ / 150 ARMS
- Frequency bandwidth: DC to 10 MHz
- Maximum continuous input range: 150 Arms
Functions with Digital Oscilloscopes, Scopecorders or other waveform measuring instruments.
-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701932 CURRENT PROBE 100 MHZ / 30 ARMS
- Frequency bandwidth: DC to 100 MHz
Maximum continuous input range: 30 Arms
Functions with Digital Oscilloscopes, Scopecorders or other waveform measuring instruments.
- Frequency bandwidth: DC to 100 MHz
-
DATA ACQUISITION, Data Acquisition Systems, General Laboratory Instruments, OSCILLOSCOPES, Test & Measurement
SL1000 HIGH-SPEED DATA ACQUISITION UNIT
- The new Yokogawa SL1000 is the only data acquisition system that delivers independent, isolated channel hardware at 100MS/ch rates, with no compromise in bit resolution, memory depth, or streaming performance.
-
DATA ACQUISITION, Data Acquisition Systems, Dimension & Displacement, General Laboratory Instruments, OSCILLOSCOPES, Osciloscopes, RPM and Speed, Test & Measurement, Torque
DL850E/DL850EV SCOPECORDER
- Measure and analyze a wealth of signals in real-time and speed up development and fault finding.
- The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines the measurements of electrical signals, physical (sensors) and CAN/ LIN / SENT serial buses and is able to trigger on electrical power related and other calculations in real-time.
- New input modules and firmware are available!
- Three new input modules 720211, 720254, and 720243 are available to support a variety of applications.
-
OSCILLOSCOPES, Test & Measurement, VOLTAGE PROBES
700925 DIFFERENTIAL PROBE 1000V / 15 MHZ
- Frequency bandwidth: DC to 15 MHz Maximum continuous input range: 1000 Volts
- Attentuation Rations: 100:1 or 10:1
- Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.
-
OSCILLOSCOPES, Test & Measurement, VOLTAGE PROBES
701922 DIFFERENTIAL PROBE 20V / 200 MHZ
- The 701922 is a 10:1 Differential Probe rated at 20Vpeak differential voltage input and 60Vpeak Common-Mode input with 200MHz bandwidth (-3dB). This probe is recommended for CAN bus and can be used with virtuallly any oscillscope with an internal 50Ω termination or use the external 50Ω 700976. This probe is powered via a built in pig-tail LEMO lead. This probe can be powered with Yokogawa scope option /P2 or /P4, or an external power supply 700938-3-D or 701934-D. The probe is supplied with one each pinchers, B9852MF black and B9852MG red and a 50cm ground extension.
-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701933 CURRENT PROBE 50 MHZ / 30 ARMS
- Frequency bandwidth: DC to 50 MHz
- Maximum continuous input range: 30 Arms
- Functions with Digital Oscilloscopes, Scopecorders or other waveform measuring instruments.
-
OSCILLOSCOPES, Test & Measurement, VOLTAGE PROBES
700924 DIFFERENTIAL PROBE1400V / 100 MHZ
- Frequency bandwidth: DC to 100 MHz
- Maximum continuous input range: 1400 Volts
- Attenuation Ratios: 100:1 or 1000:1
- Functions with Digital Oscilloscopes, ScopeCorders or other waveform measuring instruments.
-
Amplifier Wideband, Test & Measurement
High Voltage Multichannel Waveform Generators
High Voltage Multichannel Waveform Generator
The multichannel, high voltage, computer controlled Waveform Generator WFG600 is an exceptional instrument designed primarily for experiments on addressing liquid crystal devices and is most suitable for all applications where synchronized trains of pulses with variable width and amplitude are required.
-
-
ATE Systems, Switching Systems, Test & Measurement
Keithley-3700A
High switch and measure performance without the high price
-
PXIbus Instruments, Test & Measurement
CMX09
9-SLOT 3U PXIE HIGH PERFORMANCE RUGGED CHASSIS, UP TO 8 GB/S BANDWIDTH
-
Broadband High Voltage Linear Amplifiers
Amplifier model range
DC – 50Khz…..5MHz 70 Vpp…1600 Vpp 60mA….2A
-
ATE Systems, LXIbus Instruments
Keithley High Resistance/Low Current Electrometers Series 6500, 6430
The cost-effective 5½-digit Model 6485 Picoammeter can measure currents from 20fA to 20mA, at speeds up to 1000 readings per second. The Model 6487 Picoammeter/Voltage provides higher accuracy and faster rise times than the 6485, a 500V source, and a damping function for use with capacitive devices.
-
DLM2000 MIXED SIGNAL OSCILLOSCOPE
The DLM2000 is a bench-top oscilloscope for electronic design or debug. It’s ergonomic and easy to use, and packed with features. With bandwidths from 200 to 500 MHz and memory from up to 250 Mpoints, you can be certain there is a DLM2000 to meet your application and budget. With the DLM2000’s industry first “flexible MSO input”, you can choose to activate channel four as an analog input, or use it to acquire 8 bits of logic instead. Modern electronics include analog and digital circuitry—and the DLM2000’s flexible MSO input lets you measure both, including mixed signal triggers and decoding of parallel or serial bit patterns.
-
OSCILLOSCOPES, Osciloscopes, Test & Measurement
DLM4000 MIXED SIGNAL OSCILLOSCOPE
The DLM4000 is a unique to the industry eight-channel mixed-signal oscilloscope suitable to test and debugging applications in the embedded systems, power electronics, mechatronics, and automotive sectors. Available in both 350 MHz and 500 MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels. The eighth input channel features Flex MSO which converts to a 8-bit logic analyzer at the push of a button; add sixteen additional logic analyzer inputs as an option, for 24-bit logic analysis. Advanced measurement and analysis features such as power analysis and serial-bus analysis, digital filtering, user-defined math, and super-long record lengths (up to 250 Mega Points) make the DLM4000 a super powerful engineering tool. High-resolution 12.1-inch LCD display, compact landscape format, ergonomic and friendly user-interface make it easy to use.
-
Precision Instrumentation, Test & Measurement
Precision Temperature Control for TECs
The 2510 and 2510-AT TEC SourceMeter SMU instruments ensure tight temperature control for laser diode modules during test by controlling the operation of a laser diode module’s Thermo-Electric Cooler (TEC.) The 2510-AT offers an autotuning capability with which P, I, and D (proportional, integral, and derivative) values for closed loop temperature control are determined using a modified Zeigler-Nichols algorithm, eliminating the need to determine optimal values for these coefficients experimentally.
