-
ATE Systems, Test & Measurement, VXIbus Instruments
SVM2608 FOUR INDEPENDENT 100 KSA/S A/D CONVERTERS, SINGLE WIDE VME
- Four Independent 100kSa/s A/D Converters
- Option to Add Two Independent 20MSa/s A/D Converters
- On-Board FIFO for Streaming to Disk
- 1 MSa Memory per Channel for Burst Captures
- 2/4 Wire Resistance Measurements
- Robust Built-In Measurement Function
- VME 32/64
- Hermetically Sealed for Salt, Sand and Dust
-
ATE Systems, Test & Measurement, VXIbus Instruments
VM2710A 6.5 DIGIT DMM
- Auto-ranging 6.5 digit DMM
- DCV, ACV, DCI, ACI, 2- and 4-wire ohms
- Up to 2000 readings/sec over the backplane
- FIFO Memory for continuous measurements
- Two balanced differential isolated inputs
- Up to 256,000 readings of on-board memory
- Message or register data access
- Min/max, limit features, math (y=mX+b)
- High common mode rejection
- VXIplug&play drivers
-
ATE Systems, Test & Measurement, VXIbus Instruments
VM9000 VMIP BASE UNIT (HOLDS THREE INSTRUMENTS)
- Makes a single VXIbus card slot three times more powerful than single device solutions
- Designed for high performance instrumentation
- Open-platform, allowing product design with mixed or matched instruments provided by other suppliers
- Reduces the size and cost of test and data acquisition
-
ATE Systems, Test & Measurement, VXIbus Instruments
CT-310A 5-SLOT VXIBUS MAINFRAME (FOR RACK AND PORTABLE USE)
- Designed for portability and cost with small portable footprint
- Lightweight (under 22 lbs. including power supplies)
- Can house up to twelve VXIbus Instruments (VMIP™)
- Field-replaceable power supply and fan subassembly for low MTTR
- Remote isolated on/off control
- +5V and +12V are available for powering the UUT and other external devices
-
ATE Systems, Test & Measurement, VXIbus Instruments
CT-100C 6-SLOT VXIBUS MAINFRAME
- Cost-effective VXIbus Solution
- Enhanced monitoring capabilities including temperature and power monitoring
- Fault Output Signals Available on Rear Panel
- Removable Cover. Access to Instruments During Product Development or Instrument Calibration
- Adjustable Fan Speed
- Modular Fan/Power Supply Assembly Reduces MTTR
-
ATE Systems, Test & Measurement, VXIbus Instruments
EX2500A LXI-VXI GIGABIT ETHERNET SLOT-0 INTERFACE
- Up to 10 kM distance from PC to mainframe through fiberoptic interface
- 40 MB/s block transfer rates
- Embedded Web Interface provides interactive utility to control instruments
- Rack-Rack TTL trigger extension through on-board LXI Trigger Bus
- Backward compatibility with VXI 1.4 and 2.0 products
- External Clock In/Out with on-board options for TCXO/OCXO
- VXIplug&play compliant
-
AC Power Sources, Power Sources & Measurement, Test & Measurement
BL1350 AC Power Source
BL1350 AC Power Source, Frequency Converter
-
HDMI / Over IP Extender Systems, Multimedia, Pro AV Digital Systems
Cisco SG300-10P
10-PORT GIGABIT POE MANAGED SWITCH (PRE-CONFIGURED)
-
Bridges Capacitance, Precision Instrumentation, Test & Measurement
6622A Series -Direct Current Comparator Resistance Bridges
Resistance Measurement –Automatic DCC Resistance/Temperature Bridge
-
HDMI / HDBaseT Matrices &Extenders, Multimedia
500404 – HDMI / BI-IR EXTENDER KIT
The HDMI / Bi-IR Extender Kit allows HDMI equipment to be connected via one Cat 5e/6 unshielded twisted pair cables in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control applications. Four (4) mounting Ear are also provided.
-
OSCILLOSCOPES, Osciloscopes, Power Analyzer, Power Sources & Measurement, Test & Measurement
PX8000 PRECISION POWER SCOPE
- Traditional power measurement instruments cannot provide accurate time measurements; oscilloscopes are not designed to measure power. The PX8000 is the world’s first precision power scope, bringing oscilloscope-style time-based measurement to the world of power measurement. It can capture voltage and current waveforms precisely, opening up applications and solutions for a huge variety of emerging power measurement problems.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT3000E PRECISION POWER ANALYZER
- Offering the world’s highest level of power measurement accuracy, the WT3000E provides engineers with a solution for testing and verifying Product Efficiency to the highest levels. Advanced and innovative measurement functions will benefit the engineer with electrical power measurements. It provides the measurement solutions necessary in the design and testing of the latest products such as Solar Inverters, Motor Drives, Lighting Systems, Uninterruptible Power Supplies, Transformer Testing, Aircraft Power Systems, and other power conversion devices.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT3000T PRECISION POWER ANALYZER TRANSFORMER VERSION
- The WT3000T (T for Transformer Version) is the world’s most accurate power analyser, ensuring high accuracy, precision and stability at very low power factors. With almost 100 years of experience and leadership in measurement, Yokogawa enables manufacturers to develop the next generation of transformers with lower life-cycle costs.
-
Power Analyzer, Test & Measurement
WT1800 HIGH PERFORMANCE POWER ANALYZER
- This new addition to Yokogawa’s highly recognized digital power analyzer product line offers innovative measurement functions which benefit the engineer with electrical power measurements. It is the ideal measurement solution for testing Product Efficiency, and the design of Inverters, Motor Drives, Lighting Systems, Uninterruptible Power Supplies, Aircraft Power Systems, Transformer Testing and other power conversion devices.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT500 MID-RANGE POWER ANALYZER
- The WT500 Power Analyzer is a Mid Range product for single-phase and three-phase power measurements. It is designed into a compact half-rack size chassis which can also be double rack mounted. Standard features include a color TFT display and USB interface for communications and memory. The instrument has a basic accuracy of 0.1%, maximum inputs of 1000 Vrms, 40 Arms and a measurement bandwidth of DC to 100 kHz.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT300E DIGITAL POWER METER
- The WT310E provides extremely low current measurement capability down to 50 micro-Amps, and a maximum of up to 26 Amps RMS. This instrument is ideal for engineers performing stand-by-power measurements, Energy Star®, SPECpower and IEC62301 / EN50564 testing, battery charger and other low-level power measurements.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
POWER QUALITY ANALYZER CW500
- The Yokogawa CW500 is a portable power meter that utilizes current clamp-on probes, navigation screens and quick start guides. These features enable user-friendly power consumption and power quality measurements in the field that conform to IEC61000-4-30 Class S.
