-
MC2, Multimedia, Pro Audio solutions
Delta 40DSP
Combining new technology power amplification with the highest definition XTA DSP, the Delta Series offers performance and convenience at a whole new level.
Powerful processing features, such as FIR filtering and Dante networking, work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single Delta DSP amplifier can control a stereo 4-way system with no external processing.
Configure and tune using a fast, powerful combination of Audio Core (XTA’s fast efficient control software platform) and Delta Direct, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored, wirelessly. USB, direct Ethernet and RS485 control options plus configurable GPIO offer unparalleled flexibility.
All MC² Audio products are covered by a 5 year warranty.
-
MC2, Multimedia, Pro Audio solutions
DELTA 20
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
All MC² Audio products are covered by a 5 year warranty.
-
Multimedia, Pro Audio solutions, stewartaudio
MC850-LZ-D
8 Channel Dante™ / AES67 Amplifier
50W x 8 @ 4/8 Ohms
Dante™ Network EnabledThe MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.
- 8 independent Dante™ inputs
- Primary and Secondary Dante™ ports (redundant or switched)
- Ethernet port for control and reporting
- RS-232 control
- Power sharing up to 125W per channel
- Compact 1RU enclosure
- Made in USA
-
Multimedia, Pro Audio solutions, stewartaudio
MC850-CV-D
8 Channel Dante™ / AES67 Amplifier
50W x 8 @ 70V/100V
Dante™ Network EnabledThe MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.
- 8 independent Dante™ inputs
- Primary and Secondary Dante™ ports (redundant or switched)
- Ethernet port for control and reporting
- RS-232 control
- Power sharing up to 100W per channel
- Compact 1RU enclosure
- Made in USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-LZ
2 Channel DSP-Enabled Amplifier
2 x 100W @ 4/8 OhmsThe DSP100-2-LZ is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- Not Dante™ Networked (See DSP100-2-LZ-D)
- Remote Volume Control
- Made in the USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-CV-D
2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100V
Dante™ Network EnabledThe DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-CV-D supports Dante™ audio.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- 2 Dante™ input channels
- Remote Volume Control
- Made in the USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-CV
2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100VThe DSP100-2-CV is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- Not Dante™ Networked (See DSP100-2-CV-D)
- Remote Volume Control
- Made in the USA
-
DSP 4×4
DSP4x4 Features: • 4 channels of DSP processing • Configurable via USB port • RS-232 connection for live changes • 1/3 rack package & convection cooled • Made in the USA • Matrix Mixer • 9 bands of parametric filters per channel • Priority signal ducker • 100ms of delay per channel
Applications: • Hospitality Installations • Board Rooms • Classrooms • Conference Rooms • House of Worship • Remote Locations • Distributed or centralized venues • Room combining -
CVA 50 MX 1
CVA50MX-1 CVA50PMX-1 25W x 2 @ 4/8 Ohms 50W x 1 @ 25V/70V or 25V/100V Features: • Sub Compact 1/3 rack package • 4 input mono mixer amplifier
• Music and fire alarm muting • Clean full–range dynamic power • Signal Detect trigger for sleep & wake up • Multiple mounting options • External inline power supply • Made in the USA
Applications: • Boardrooms & classrooms • AV projection systems • Lecterns and Podiums • Plenum applications, UL 2043 rated • Pole mounting option • Fixed installations with mixer amplifiers located in listening environment • Applications where traditional mixer amplifiers won’t fit • Behind flat screen televisions -
CVA 50 – 1 net
Mono Dante™
Subcompact Amplifier – 50W x 1 @ 70V/100VMono constant voltage networked amplifier in a subcompact, 1/3 rack form factor.
- Mono networked endpoint
- External inline power supply
- Line out
-
AV25-2
AV25-2 RS232
35W x 2 @ 4 Ohms 25W x 2 @ 8 Ohms
Features: • Sub Compact 1/4 rack package • Two channel amplifier optimized to drive 4 Ohm and 8 Ohm loads
• RS232 control over volume and muting • Set discrete values • Multiple mounting options • External inline power supply • Made in the USA
Applications: • Boardrooms & classrooms • Hospitality • Lecterns & podiums • Pole mounting option • Fixed installations with mixer amplifiers located in listening environment • Applications where traditional amplifiers won’t fit • Behind flat screen televisions -
Key digital Pro AV Digital Systems, Multimedia
KD-CX800
Control Interface with IR and RS-232 over IP Routing
KD-CX800 is a control over IP device with three multi-function control ports supporting
bi-directional RS-232, IR out (emitter), IR in (sensor or hardwire), voltage trigger, or
voltage sensor. -
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
Microphone ES947/LED
ES947/LED
CARDIOID CONDENSER BOUNDARY MICROPHONE WITH LED
- Contractor-exclusive innovations for every acoustical challenge
- Safe haven from Radio Frequency Interference (RFI)
- Low-profile cardioid condenser boundary microphone
- Designed for clear, highly intelligible sound reinforcement, teleconference
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Available in black (ES947/LED) or white (ES947W/LED)
