Showing 1–18 of 39 results

View
Filters:

  • , ,

    ZM serie

    nF ZM series LCR meters cover a wide frequency range, from the low-frequency region of 1 mHz up to 5.5 MHz. Supports a wide range of applications, from materials research to component production lines, by means of high-speed, low measurement fluctuation

    Learn more

  • , ,

    Model FRA51615

    The FRA51615 is suitable to measure frequency response for many industries from electronic circuits, electronic components, and materials to mechatronics and electrochemical applications. Equipped with the performance and functionality to support many industries, FRA51615 provides highly reproducible measurement data and more efficient testing operations.

    The FRA51615 is the newest FRA developed to meet the needs and desires of our customers, and to provide the best user-friendliness, down to the smallest detail, featuring 10μHz to 2MHz, Gain accuracy ±0.01dB, Phase accuracy ±0.06°

    Learn more

  • , ,

    Model LI5600

    Lock-in Amplifiers that measure extremely small alternating signals hidden deep within noise, are used in a wide range of advanced research fields, including scanning probe microscopes, terahertz spectroscopy and spintronics.

    NF's newest lock-in amplifier LI5600 series is 2-phase, 2-frequency digital lock-in amplifier that delivers a high level of stability with post-phase detection digital signal processing. The series covers all areas of key functionality required for increasing reliability when measuring very small signals, such as an outstanding dynamic reserve up to 100 dB, update rates up to approximately 1.5 M samples/s (LI5660/LI5655), and smooth, high-speed 16-bit amplitude resolution output response.

    Learn more

  • , ,

    TOE 7741

    TOELLNER Model TOE 7741 Function Generator

    • Frequency range 1 mHz to 100 kHz
    • High output power > 63 W into 8 Ohm
    • Max. output amplitude 45 Vpp
    • Output with feedback voltage protection
    • Frequency counter up to 30 MHz

     

    Learn more

  • , ,

    TOE 7761

    TOELLNER Model TOE 7761 Arbitrary Function Generator

    • 1 μHz to 40 MHz sine and square waveforms
    • Output amplitude up to 20 Vss
    • 80 MS/s sampling rate with arbitrary waveforms with 14 bit resolution and up to 1 000 000 sampling points
    • Flash memory for 1 000 000 sampling points
    • Many standard waveforms assist in creating arbitrary waveforms
    • Various modulation and sweep options
    • 50 instrument configurations can be stored
    • Remote control via USB-1), GPIB- and RS-232 interface

     

    Learn more

  • , ,

    TOE 7607

    TOELLNER Model TOE 7607 Broadband Amplifier

    • High output voltage of up to 40 Vpp into 50 Ohm
    • Wide frequency range from DC to 5 MHz
    • Gain of up to 26 dB
    • Small distortion factor

     

    Learn more

  • , ,

    TEGAM Model 1740

    TEGAM Model 1740 High Speed Microohmmeter, including GPIB & RS-232

    Basic Accuracy: 0.02%
    Measurement Speed: 10 ms
    Range: 20 mΩ to 20 MΩ
    Resolution: 1 µΩ
    Programmable reference currents
    Kelvin Klips, Spade Lugs or Kelvin Probes available
    Easy to operate and easy to integrate
    1-year warranty on this Microohmmeter
    Made in USA

    Learn more

  • , ,

    TEGAM Model 253 LCR

    TEGAM Model 253 LCR Meter Auto-ranging LCR Meter, 1 kHz, Battery Powered

    Basic Accuracy: 0.25%
    Measurement Speed: 250 ms
    Test Frequency: 1 kHz
    Automatic L, C, R, G and D measurements
    Auto Ranging
    Shielded Kelvin Connections
    Rechargeable Battery Power Pack
    Rear Panel External Bias Terminals
    Calibration Certificate Included
    1-year warranty
    Made in USA

    Learn more

  • ,

    DATAQ DI-4718B

    DATAQ DI-4718B Data Acquisition and Data Logger Products
    Measures temperature, pressure, flow, current, voltage, and more using isolated 8B amplifiers. View the DI-8B amplifier selection guide

    Low-Cost, Portable, USB or Ethernet Data Logger

    Eight DI-8B signal-conditioned analog inputs. Expandable with ChannelStretch™ (Unlock code required for each instrument)

    Stand-alone data logger option allows in-the-field measurements to be saved to flash memory (unlock code required for each instrument to record all channels to flash memory)

    Up to 16-bit analog to digital conversion

    Learn more

  • ,

    DATAQ Model DI-4108-U

    DATAQ    Model DI-4108-U
    USB DAQ and Data Logger, 12 to 16-bit resolution, 160,000 S/s Throughput, Records to USB flash drive
    Includes a DI-4108 instrument, a 6-foot USB cable, a screwdriver for signal connections, and a USB flash drive with WinDaq/Lite software (downloadable at run.dataq.com) and an NIST-traceable calibration certificate (.pdf)

    Provided with WinDaq/Lite Software, which records up to four channels at any sampling rate.  WinDaq/Unlock code required per device for data synchronization in WinDaq.

    Stand-alone capability to USB thumb drive (Unlock Code required to record all channels to USB thumb drive – See Accessories)

    Up to 160,000 Hz Sample Throughput Rate using WinDaq Acquisition software

    Up to 160,000 Hz Sample Throughput Rate in stand-alone mode using high speed microSD card

    12 to 16-bit analog-to-digital resolution (Calculate Resolution)

    Programmable ranges: ±200, ±500 mV, ±1, ±2, ±5, ±10 V full scale

    Eight armored analog differential inputs*

    Up to 120 V rms without damage

    Learn more

  • ,

    DATAQ Model DI-808

    DATAQ Model DI-808
    Eight-channel Web-based Voltage, Thermocouple, and Pulse Data Logger
    Includes a DI-808 instrument, a screwdriver for signal connections, a power supply, and an NIST-traceable calibration certificate

    No software to install

    Intelligent data logger with built-in web server works with with any device using a modern web browser

    Stores data locally to internal flash memory or a USB thumb drive and/or remotely to any accessible server or email address

    Allows remote real time display and configuration

    Eight differential and isolated analog input channels programmable as voltage or thermocouple per channel measuring ±10mV, ±25mV, ±50mV, ±100mV, ±250mV, ±500mV, ±1V, ±2.5V, ±5V, ±10V, ±25V, or ±50V; or Thermocouple types J, K, T, B, R, S, E, or N

     

    Learn more

  • ,

    1750

    Recognized as the industry's fastest precision microohmmeter, the model 1750 has become the #1 choice in manufacturing environments. Fuse manufacturers use it for nondestructive tests where the unmatched precision increases the process yield to the point where the 1750 pays for itself in weeks. The vast majority of resistors less than 1 Ohm are tested and sorted to accuracy better than 0.1% by the 1750. Automotive suppliers use it to consistently meet stringent quality requirements of welds, bonds and electrical connection in sub-assemblies. Aircraft manufacturers employ the 1750 to measure wiring harnesses and RF shields for connection integrity. The capability of the 1750 enables the accurate real time measurement of electro-plating thickness and conductive coatings on housings and shields.

    Learn more

  • ,

    9334A

    The 9334A SERIES of DC Air Based Resistance Standards are designed for high accuracy resistance calibration in air.

    Learn more

  • ,

    SAS-17E & SAS-36E

    SAS-E is a high performance, highly manageable and reliable solution for distributing time and frequency signals for satcom, digital TV or audio broadcast, microwave links, satellite ground stations applications.

    The Epsilon™ Switch and Amplifier System (SAS-E) provides a cost effective way to extend distribution of time and frequency signals (pulse, low phase noise frequency signal, Time of Day), as a signal amplifier. Thanks to analog amplification, SAS-E adds very little phase noise to the input frequency and ensures high RF isolation. It is therefore suitable for reference frequency distribution towards transmitters, up-converters, micro-wave links. Pulse regeneration is transparent to pulse duration and period: SAS-E is therefore suitable for distribution of any pulse encoded signal like 1 pps, DCLS IRIG, etc

     

    Learn more

  • ,

    2340/2350

    The Model 2340 High Voltage Amplifier expands the amplitude range of any standard function, pulse or waveform generator to 400 Vp-p. There is also a special high impedance input option for DAC boards. The DC coupled design enables combined DC and AC wave forms for greatest flexibility in test applications.  The response and gain are calibrated for a faithful reproduction of the test signal.

    The output current is rated at 40 mA continuous with a 0.2 Ω output impedance. Each channel has an independent, buffered, voltage monitor output for applications that require a low-level representation of the output signal. The buffers produce a reduction of 200:1 for 50 Ω inputs and 100:1 for 1 MΩ and above inputs. A current limiting function senses the current in either direction providing maximum protection to the amplifier during operation.

    Learn more

  • , , , , ,

    DL350

    The DL350 ScopeCorder is a portable instrument featuring the deep measurement and recording capabilities you need in the lab in a compact instrument you can take into the field. A ScopeCorder combines the transient signal capturing capabilities of an oscilloscope with the long-term datalogging capabilities of a data recorder. For “quick and easy” troubleshooting or sophisticated mixed-signal datalogging, the DL350 is a portable, powerful, and useable engineering tool that makes complete measurements completely portable.

    Learn more

  • ,

    SIRIUS R8D rack display solution

    8 to 32 analog inputs

    Learn more

  • , , ,

    PXI-9846D 4-CH, 40MS/S, 16-BIT PXI-H DIGITIZER MODULE
    • 4-CH, 40MS/s, 16-bit digitizer
    • 512 MB deep on-board memory for recording waveforms for extended periods
    • Software selectable 50Ω or 1 MΩ input impedance
    • ±0.2V and ±1V input ranges
    • External clock support
    • Extensive analog and digital triggering
    • Fully auto-calibration
    Learn more