RIGID-PIPE MICROPHONE ES905CL

ES905CL

CARDIOID RIGID-PIPE CONDENSER MICROPHONE

  • Designed for high-quality sound reinforcement and professional recording
  • Low-profile element provides uniform cardioid polar pattern
  • Rigid-pipe design with ball-in-socket base permits flexible positioning
  • Sturdy metal base mounts to table, desk or podium with included hardware
  • Superior off-axis rejection for maximum gain before feedback
  • Requires 11V to 52V DC phantom power

imgres

Product Description

CARDIOID RIGID-PIPE CONDENSER MICROPHONE


The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included.

  • Designed for high-quality sound reinforcement, professional recording and broadcasting

  • Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle

  • Rigid-pipe design with ball-in-socket base permits flexible positioning

  • Sturdy metal base mounts to table, desk or podium with included hardware

  • Superior off-axis rejection for maximum gain before feedback

  • Requires 11V to 52V DC phantom power

  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)

  • Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

Specifications
































































Element Fixed-charge back plate permanently polarised condenser
Polar Pattern Cardioid
Frequency Response 60 – 20,000 Hz
Open Circuit Sensitivity -38 dB (12.5 mV) re 1V at 1 Pa
Impedance 250 ohms
Maximum Input Sound Level 138 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off 80 Hz, 18 dB/octave
Dynamic Range 111 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Weight Microphone: 330 g (11.6 oz)
Power Module : 81 g (2.9 oz)
Dimensions Microphone : 523.4 mm (20.61″) long – 24.6 mm (0.97″) head diameter
Power Module : 92.9 mm (3.66″) long, 18.9 mm (0.74″) diameter
Output Connector Integral 3-pin XLRM-type (Power module)
Cable 2.9 m (9.5′) long, (permanently attached to microphone) 3.2 mm (0.13″) diameter, 2-conductor, shielded cable terminated with TA3F-type connector
Accessories Included AT8538 power module; (3) #8 x 1″ black oxide wood screws for microphone mount