Showing 28–54 of 61 results

View
Filters:

  • , ,

    DELTA 120

    imgres

    Learn more

  • , ,

    DELTA 100

    imgres

    Learn more

  • , ,

    DELTA 80

    imgres

    Learn more

  • , ,

    DELTA 40

    imgres

    Learn more

  • , ,

    DELTA 20

    Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.

     

    A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.

    Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.

    Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

    All MC² Audio products are covered by a 5 year warranty.

    imgres

    Learn more

  • , ,

    MC850-LZ-D

    8 Channel Dante™ / AES67 Amplifier
    50W x 8 @ 4/8 Ohms
    Dante™ Network Enabled

    The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.

    • 8 independent Dante™ inputs
    • Primary and Secondary Dante™ ports (redundant or switched)
    • Ethernet port for control and reporting
    • RS-232 control
    • Power sharing up to 125W per channel
    • Compact 1RU enclosure
    • Made in USA
    Learn more

  • , ,

    MC850-CV-D

    8 Channel Dante™ / AES67 Amplifier
    50W x 8 @ 70V/100V
    Dante™ Network Enabled

    The MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.

     

    • 8 independent Dante™ inputs
    • Primary and Secondary Dante™ ports (redundant or switched)
    • Ethernet port for control and reporting
    • RS-232 control
    • Power sharing up to 100W per channel
    • Compact 1RU enclosure
    • Made in USA
    Learn more

  • , ,

    DSP100-2-LZ

    2 Channel DSP-Enabled Amplifier
    2 x 100W @ 4/8 Ohms

    The DSP100-2-LZ is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.

     

    • Onboard full featured DSP
    • Configurable via USB port
    • Convection cooled, 1/2 rack enclosure
    • 2 balanced + 2 RCA analog line/mic inputs
    • Not Dante™ Networked (See DSP100-2-LZ-D)
    • Remote Volume Control
    • Made in the USA
    Learn more

  • , ,

    DSP100-2-CV-D

    2 Channel DSP-Enabled Amplifier
    2 x 100W @ 70V/100V
    Dante™ Network Enabled

    The DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-CV-D supports Dante™ audio.

     

    • Onboard full featured DSP
    • Configurable via USB port
    • Convection cooled, 1/2 rack enclosure
    • 2 balanced + 2 RCA analog line/mic inputs
    • 2 Dante™ input channels
    • Remote Volume Control
    • Made in the USA
    Learn more

  • , ,

    DSP100-2-CV

    2 Channel DSP-Enabled Amplifier
    2 x 100W @ 70V/100V

    The DSP100-2-CV is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.

     

    • Onboard full featured DSP
    • Configurable via USB port
    • Convection cooled, 1/2 rack enclosure
    • 2 balanced + 2 RCA analog line/mic inputs
    • Not Dante™ Networked (See DSP100-2-CV-D)
    • Remote Volume Control
    • Made in the USA
    Learn more

  • ,

    DSP 4×4

    DSP4x4 Features: • 4 channels of DSP processing • Configurable via USB port • RS-232 connection for live changes • 1/3 rack package & convection cooled • Made in the USA • Matrix Mixer • 9 bands of parametric filters per channel • Priority signal ducker • 100ms of delay per channel
    Applications: • Hospitality Installations • Board Rooms • Classrooms • Conference Rooms • House of Worship • Remote Locations • Distributed or centralized venues • Room combining

    Learn more

  • CVA 50 MX 1

    CVA50MX-1 CVA50PMX-1 25W x 2 @ 4/8 Ohms 50W x 1 @ 25V/70V or 25V/100V Features: • Sub Compact 1/3 rack package • 4 input mono mixer amplifier
    • Music and fire alarm muting • Clean full–range dynamic power • Signal Detect trigger for sleep & wake up • Multiple mounting options • External inline power supply • Made in the USA
    Applications: • Boardrooms & classrooms • AV projection systems • Lecterns and Podiums • Plenum applications, UL 2043 rated • Pole mounting option • Fixed installations with mixer amplifiers located in listening environment • Applications where traditional mixer amplifiers won’t fit • Behind flat screen televisions

    Learn more

  • CVA 50 – 1 net

    Mono Dante™
    Subcompact Amplifier – 50W x 1 @ 70V/100V

    Mono constant voltage networked amplifier in a subcompact, 1/3 rack form factor.

    • Mono networked endpoint
    • External inline power supply
    • Line out
    Learn more

  • AV25-2

    AV25-2 RS232

    35W x 2 @ 4 Ohms 25W x 2 @ 8 Ohms
    Features: • Sub Compact 1/4 rack package • Two channel amplifier optimized to drive 4 Ohm and 8 Ohm loads
    • RS232 control over volume and muting • Set discrete values • Multiple mounting options • External inline power supply • Made in the USA
    Applications: • Boardrooms & classrooms • Hospitality • Lecterns & podiums • Pole mounting option • Fixed installations with mixer amplifiers located in listening environment • Applications where traditional amplifiers won’t fit • Behind flat screen televisions

    Learn more

  • , , , ,

    Microphone ES947/LED

    ES947/LED

    CARDIOID CONDENSER BOUNDARY MICROPHONE WITH LED

    • Contractor-exclusive innovations for every acoustical challenge
    • Safe haven from Radio Frequency Interference (RFI)
    • Low-profile cardioid condenser boundary microphone
    • Designed for clear, highly intelligible sound reinforcement, teleconference
    • Mounts unobtrusively in table-tops, ceilings and wall panels
    • Available in black (ES947/LED) or white (ES947W/LED)

    imgres

    Learn more

  • , , , ,

    ES947

    ES947

    CARDIOID WIDE RANGE FIXED CHARGE CONDENSER BOUNDARY MICROPHONE

    • Designed for surface-mount applications
    • Cardioid polar pattern with 120º acceptance angle
    • Mounts unobtrusively in table-tops, ceilings and wall panels
    • Isolators provide mechanical dampening of mounting-surface vibration
    • Operates on 9-52V phantom power only
    • UniGuard® RFI-shielding technology

    imgres

    Learn more

  • , , , ,

    MICROPHONE ES945/LED

    ES945/LED

    OMNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE WITH LED

    • Contractor-exclusive innovations for every acoustical challenge
    • Safe haven from Radio Frequency Interference (RFI)
    • Low-profile omnidirectional condenser boundary microphone
    • Designed for clear, highly intelligible sound reinforcement, teleconference
    • Mounts unobtrusively in table-tops, ceilings and wall panels
    • Disponible en deux coloris : blanc (ES945W/LED) ou noir (ES945/LED)

    imgres

    Learn more

  • , , , ,

    ES945

    ES945

    OMNIDIRECTIONAL FIXED CHARGE CONDENSER BOUNDARY MICROPHONE

    • Designed for surface-mount applications
    • Omnidirectional polar pattern with 360º acceptance angle
    • Mounts unobtrusively in table-tops, ceilings and wall panels
    • Isolators provide mechanical dampening of mounting-surface vibration
    • Operates on 9-52V phantom power only
    • UniGuard® RFI-shielding technology

    imgres

    Learn more

  • , , , ,

    ES935SC6

    ES935SC6

    CARDIOID CONDENSER GOOSENECK MICROPHONE WITH LIGHTING MUTE SWITCH

    • Designed for professional recording and demanding sound pickup applications
    • Mute switch in base lights to indicate operational status of the microphone
    • Low-profile element provides uniform cardioid polar pattern
    • Unobtrusive design with an overall length of only 197.3 mm
    • Plugs into any standard XLRF-type connector

    imgres

    Learn more

  • , , , ,

    ES915SC

    ES915SC

    CARDIOID CONDENSER GOOSENECK MICROPHONE WITH MUTE SWITCH/LED

    • Designed for professional recording and demanding sound pickup applications
    • Low-profile element provides uniform cardioid polar pattern
    • Plugs into any standard XLRF-type connector
    • Included low-profile isolation mount attenuates noise, shock and vibration

    imgres

    Learn more

  • , , , ,

    RIGID-PIPE MICROPHONE ES905CL

    ES905CL

    CARDIOID RIGID-PIPE CONDENSER MICROPHONE

    • Designed for high-quality sound reinforcement and professional recording
    • Low-profile element provides uniform cardioid polar pattern
    • Rigid-pipe design with ball-in-socket base permits flexible positioning
    • Sturdy metal base mounts to table, desk or podium with included hardware
    • Superior off-axis rejection for maximum gain before feedback
    • Requires 11V to 52V DC phantom power

    imgres

    Learn more

  • , , , ,

    ATND8677

    ATND8677

    MICROPHONE DESK STAND WITH DANTE™

    • Connects directly to Dante network via Ethernet cable
    • Integrated user switch controls talk/mute in Local mode
    • Integrated user switch triggers Dante-enabled devices in Remote mode
    • Powered by network PoE
    • Scalable across Dante’s 512 bidirectional audio channels
    • Touch-sensitive capacitive-type user switch

    imgres

    Learn more

  • , , , ,

    ATND971

    ATND971

    CARDIOID CONDENSER BOUNDARY MICROPHONE WITH DANTE™

    • Bridges the gap between audio and IT
    • Transmits audio and control data together over Audinate’s Dante™ network
    • Perfect fit for boardrooms and other meeting spaces
    • Supports up to 512 bidirectional audio channels
    • Easy to install and operate
    • Features UniGuard® RFI-shielding technology and UniSteep® low-cut filter

    imgres

    Learn more

  • , , , ,

    PRO49QL

    PRO49QL

    CARDIOID CONDENSER QUICK-MOUNT GOOSENECK MICROPHONE, 418MM

    • Wide-range condenser element with low-mass diaphragm
    • Self-contained electronics eliminate need for external power modules
    • Flat, smooth frequency response
    • Quiet, fixed-placement long-life gooseneck
    • Plugs into any standard XLRF-type surface or cable connector
    • Also available in a 13.07″ (332.0 mm) as PRO49Q

    imgres

    Learn more

  • , , , ,

    PRO47TL
    • Wide-range condenser element with low-mass diaphragm
    • Self-contained electronics eliminate need for external power modules
    • Flat, smooth frequency response
    • Quiet, fixed-placement, long-life gooseneck
    • 3.0 m cable permanently attached between microphone and XLRM connector
    • Requires 9V to 52V DC phantom power

    imgres

    Learn more

  • , , , ,

    PRO45

    PRO45

    CARDIOID CONDENSER HANGING MICROPHONE, BLACK

    • Hi-SPL handling is ideal for suspension over choirs and orchestras
    • Wide-range condenser element with low-mass diaphragm
    • Self-contained electronics eliminate need for external power modules
    • Flat, smooth frequency response
    • 7.6 m cable permanently attached between microphone and XLRM connector
    • Also available in white as PRO45W

    imgres

    Learn more

  • , , , ,

    PRO44

    PRO44

    UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE

    • Very low-profile design for minimum visibility
    • Wide-range condenser element with low-mass diaphragm
    • Self-contained electronics eliminate need for external power modules
    • Rugged design and construction
    • 25′ (7.6 m) detachable cable (TA3F to XLRM-type)
    • Dimensions 73mm x 90.5mm x 15mm

    imgres

    Learn more