Showing 163–189 of 337 results

View
Filters:

  • , , ,

    500072

    The USB 2.0 4-Port Extender Kit enables USB 2.0 connectivity over Cat5e/6 at data rates up to 480Mbps & extends true USB up to 328ft / 100m over single Cat5e/6 cable.

    This USB 2.0 4-Port Extender Kit is true plug and play, it requires no additional software drivers, and is compatible with all major operating systems.

    The unit supports a wide variety of USB extension applications including security, industrial control, digital signage, scientific data acquisition and other implementations of USB standards.

    imgres

    Learn more

  • , , ,

    500457

    This HDMI extender 4K with USB allows one HDMI 1.4 and one USB 2.0 channel to be transmitted up to 330ft (100m) at all resolutions up to 1920×1200 @ 60Hz via one (1) Cat 5e/6 cable in a point-to-point configuration. The receiving side includes a 4-port USB 2.0 hub, supporting KVM applications. Bi-directional IR transmission is supported.

    Typical KVM Applications:

    • Commercial and residential AV systems
    • Classroom projector system
    • Boardroom systems
    • Collaborative PC systems
    • Medical information systems

    imgres

    Learn more

  • , , ,

    X222PO

    4K POH/HDBaseT/HDMI Extenders (TX/RX KIT)

     

    Learn more

  • , , ,

    500462

    The HDMI Optical Isolator (500462) allows HDMI equipment to be completely isolated and connected up to 984ft (300m), while allowing a unidirectional communication (with no return signaling) via one (1) LC 50/125 μm OM3 multimode fiber cable in a point-to-point configuration at 1080p resolution.

    The HDMI Optical Isolator establishes a high separation between the source computer and the display devices preventing any potential leakage between the source and the peripheral equipment; removing the vulnerability of shared display equipment to cyber-attacks.

    The kit comes with one (1) Transmitter, one (1) Receiver and two (2) power supply.

    imgres

    Learn more

  • , , ,

    500459-100

    The HDMI/RS232 100m Extender Kit, HDBT, 4K/60 allows HDMI equipment to be connected up to 230ft (70m) at 4K/60 (4:4:4) resolution, or 330ft (100m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. The unit is HDCP 2.2 compliant and supports HDR, as well as RS232 and bidirectional IR pass through transmission for end device remote control. This HDMI extender 4K supports PoC, allowing the transmitter to power the receiver, or the receiver to power the transmitter. The HDMI extender 4K kit includes one (1) transmitter, one (1) receiver, one (1) IR Emitter, one (1) IR sensor and one (1) power supply.

    imgres

    Learn more

  • , , ,

    500451-POE

    This HDMI extender 4K allows HDMI equipment to be connected up to 131ft (40m) at 4K/30 (4:4:4) or 4K/60 (4:2:0) resolutions, or 230 ft (70 m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. This HDMI extender 4K kit comes with one (1) transmitter, one (1) receiver, one (1) IR Emitter, and one (1) IR sensor.

    imgres

    Learn more

  • , , ,

    500404

    The HDMI / Bi-IR Extender Kit allows HDMI equipment to be connected via one Cat 5e/6 unshielded twisted pair cables in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control applications.  Four (4) mounting Ear are also provided for wall-mount applications

    imgres

    Learn more

  • , ,

    500770

    The USB KVM Extender over IP PoE allows HDMI & USB equipment to be connected up to 330ft (100m) over an Ethernet LAN, supporting 1920×1200 and 1080p resolution @ 60Hz via Cat5e/6 cable in multiple point-to-point and point-to-multipoint configurations. The Transmitter (500770-TX) and Receiver (500770-RX) support PoE (PD) if used with a PoE (PSE) Ethernet Switch.

    The Transmitter terminates to a computer server/workstation via an HDMI & USB port, The Receiver terminates to an HDMI display and up to 4 USB devices such as a keyboard, mouse, printer, drawing pad, storage device, camera, etc., via a 4 port USB hub. A single Receiver can be switched via hotkey sequences to any Transmitter on the network, allowing a single operator to manage numerous servers/workstations, in a distributed KVM application.

     

    imgres

    Learn more

  • , ,

    500762

    The HDMI over IP H.264/H.265 PoE Extender Transmitter and Receiver combination allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, and supports Video Wall and Multiview capabilities in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz. These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.

     

    imgres

    Learn more

  • , ,

    500759

    Finally get the 4K video wall display you have always wanted with this HDMI 4K over IP solution which allows HDMI equipment supporting up to 4K @ 30Hz or 1080p at 60Hz resolution to be connected and extended to create a video wall of user-configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one Receiver for each display in the array. Transmitter (500759-TX) and Receiver (500759-RX) can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch. The Transmitters and Receivers support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch. The IR Emitter and IR Sensor, if required, may be purchased separately for IR based remote control applications. Look no further for video over IP solutions.

    The MuxLab Pro Digital Network Controller (500811) is available to simplify configuration and control and allows for third-party smartphone and tablet management.

     

    imgres

    Learn more

  • , ,

    500754

    The HDMI over IP PoE Extender allows HDMI equipment to be connected to create a Video Wall of a user configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one receiver for each display in the array.

    The transmitter unit is connected using a LAN switch (PoE or non-PoE), with maximum distances of 330ft (100m) of Cat5e/6 cable between equipment.

    Set-up and configuration of the video wall function is carried out using the MuxLab ProDigital Network Controller (500811) – sold separately.

     

    imgres

    Learn more

  • , ,

    UPS52U

    4K/18G USB/Universal Presentation Switcher with 5 Inputs (HDBT, 2x HDMI, DP, USB-C), 2 Mirrored Outputs (HDBT, HDMI), LAN, ARC, Audio De-Embed, IR, RS-232, IP Control, CEC Manager™. Includes Rx. – Shipping Q3 2019

     

    Included:

X100MRX

    imgres

    Learn more

  • , ,

    PS42

    4K/18G Presentation Switcher with 4 Inputs (HDBT, 3x HDMI), 2 Mirrored Outputs (HDBT, HDMI), Audio De-Embed, IR, RS-232, IP, CEC Manager™. Includes Rx. – Shipping Q3 2019

     

    Included:

X40MRX

    imgres

    Learn more

  • , ,

    MLV4x2PRO

    4×2 4K POH/HDBaseT/HDMI/VGA Multi-View Seamless Presentation Matrix Switcher. (Includes 1 Rx Extender)

    Included:

X222PO

     

    imgres

    Learn more

  • , ,

    500435

    The 5×1 HDMI / HDBT Presentation switch is a compact scaler switcher with 5 video inputs (3 HDMI, 2 VGA) and 6 audio inputs (3 HDMI audio & 2 VGA with audio switched following the video; 1 MIC audio input). The VGA input supports VGA, Component Video (YPbPr) and Composite Video.

    The 5×1 HDMI / HDBT Presentation switch scales & switches any video signal to HDMI output and HDBaseT output for a transmission over up to 70 m of Cat5e/6 with PoC support.

    With 1 IR Sensor, 5 IR Emitters and 1 RS232 port, bidirectional IR & RS232 signals can be transmitted simultaneously between the 5×1 HDMI / HDBT Presentation switch and the HDMI Extender PoC/PoE Receiver.

     

    imgres

    Learn more

  • , ,

    DSP100-2-LZ-D

    2 Channel DSP-Enabled Amplifier
    2 x 100W @ 4/8 Ohms
    Dante™ Network Enabled

    The DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.

     

    • Onboard full featured DSP
    • Configurable via USB port
    • Convection cooled, 1/2 rack enclosure
    • 2 balanced + 2 RCA analog line/mic inputs
    • 2 Dante™ input channels
    • Remote Volume Control
    • Made in the USA
    Learn more

  • , ,

    Delta 100DSP

    imgres

    Learn more

  • , ,

    Delta 80DSP

    imgres

    Learn more

  • , ,

    Delta 40DSP

    Combining new technology power amplification with the highest definition XTA DSP, the Delta Series offers performance and convenience at a whole new level.

    Powerful processing features, such as FIR filtering and Dante networking, work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single Delta DSP amplifier can control a stereo 4-way system with no external processing.

    Configure and tune using a fast, powerful combination of Audio Core (XTA’s fast efficient control software platform) and Delta Direct, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored, wirelessly. USB, direct Ethernet and RS485 control options plus configurable GPIO offer unparalleled flexibility.

    All MC² Audio products are covered by a 5 year warranty.

     

     

    imgres

    Learn more

  • , ,

    DELTA 120

    imgres

    Learn more

  • , ,

    DELTA 100

    imgres

    Learn more

  • , ,

    DELTA 80

    imgres

    Learn more

  • , ,

    DELTA 40

    imgres

    Learn more

  • , ,

    DELTA 20

    Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.

     

    A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.

    Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.

    Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

    All MC² Audio products are covered by a 5 year warranty.

    imgres

    Learn more

  • , ,

    MC850-LZ-D

    8 Channel Dante™ / AES67 Amplifier
    50W x 8 @ 4/8 Ohms
    Dante™ Network Enabled

    The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.

    • 8 independent Dante™ inputs
    • Primary and Secondary Dante™ ports (redundant or switched)
    • Ethernet port for control and reporting
    • RS-232 control
    • Power sharing up to 125W per channel
    • Compact 1RU enclosure
    • Made in USA
    Learn more

  • , ,

    MC850-CV-D

    8 Channel Dante™ / AES67 Amplifier
    50W x 8 @ 70V/100V
    Dante™ Network Enabled

    The MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.

     

    • 8 independent Dante™ inputs
    • Primary and Secondary Dante™ ports (redundant or switched)
    • Ethernet port for control and reporting
    • RS-232 control
    • Power sharing up to 100W per channel
    • Compact 1RU enclosure
    • Made in USA
    Learn more

  • , ,

    DSP100-2-LZ

    2 Channel DSP-Enabled Amplifier
    2 x 100W @ 4/8 Ohms

    The DSP100-2-LZ is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.

     

    • Onboard full featured DSP
    • Configurable via USB port
    • Convection cooled, 1/2 rack enclosure
    • 2 balanced + 2 RCA analog line/mic inputs
    • Not Dante™ Networked (See DSP100-2-LZ-D)
    • Remote Volume Control
    • Made in the USA
    Learn more