Showing 136–162 of 337 results

View
Filters:

  • ,

    DVX-2265-4K

    6×2+1 4K60 4:4:4 All-In-One Presentation Switcher (4 HDMI Inputs, 2 DXLink-4K60 Inputs)

     

    Learn more

  • , ,

    TOE 7741

    TOELLNER Model TOE 7741 Function Generator

    • Frequency range 1 mHz to 100 kHz
    • High output power > 63 W into 8 Ohm
    • Max. output amplitude 45 Vpp
    • Output with feedback voltage protection
    • Frequency counter up to 30 MHz

     

    Learn more

  • , ,

    TOE 7761

    TOELLNER Model TOE 7761 Arbitrary Function Generator

    • 1 μHz to 40 MHz sine and square waveforms
    • Output amplitude up to 20 Vss
    • 80 MS/s sampling rate with arbitrary waveforms with 14 bit resolution and up to 1 000 000 sampling points
    • Flash memory for 1 000 000 sampling points
    • Many standard waveforms assist in creating arbitrary waveforms
    • Various modulation and sweep options
    • 50 instrument configurations can be stored
    • Remote control via USB-1), GPIB- and RS-232 interface

     

    Learn more

  • , ,

    TOE 7607

    TOELLNER Model TOE 7607 Broadband Amplifier

    • High output voltage of up to 40 Vpp into 50 Ohm
    • Wide frequency range from DC to 5 MHz
    • Gain of up to 26 dB
    • Small distortion factor

     

    Learn more

  • , ,

    TOE 8800

    TOELLNER  Series TOE 8800 Arbitrary Power Supplies from 160 W to 5200 W

    Single-Output and Dual-Output Power Supplies up to 400 W

    • Generates any voltage and current characteristics
    • Imports real-time signals from digital storage oscilloscopes or data recording systems
    • Very high rise and fall rates of the output voltage: approx. 2 V/μs
    • Brief load currents up to 1000 A
    • User-friendly software
    • GPIB and analog interfaces included as standard
    • Vehicle electrics ripple: AC superimposition 4 Vpp
    • 20 Hz to 70 kHz (TOE 8815 to TOE 8865)
    • 20 Hz bis 50 kHz (TOE 8865 to TOE 88165)
    • Internal sink function Brief load sink: 1000 W to 16000 W, depends on model
    • Brief load current: 3 x Irated for approx. 10 ms (max. 1000 A)

     

    Learn more

  • , ,

    TOE 8950

    TOELLNER  Models TOE 8951 / TOE 8952

    Single-Output and Dual-Output Power Supplies up to 400 W

    • Automatic setting to the existing line voltage: 115 V or 230 V, 47 to 63 Hz
    • Autoranging
    • RS 232 and analog interfaces included as standard
    • USB, LAN,  and GPIB interfaces optional
    • Outputs at front and rear as standard
    • On/off switching of the outputsge
    • ½ 19“ weight, 2 HU design parallel installation possible
    • Sensing
    • Free LabView™ driver
    • Can be used as constant voltage, constant current and constant power source (CV/CC/CP)

     

    Learn more

  • , ,

    TOE 8730

    TOELLNER Series TOE 8730 Multichannel DC Power Supplies 150 W

    • Dual-output, triple-output and quintuple-output power supplies
    • Extremely low residual ripple < 50 μV
    • Electrically decoupled outputs
    • Precise digital displays
    • Analog remote control
    • Resolution up to 1 mA

     

    Learn more

  • , ,

    Saluki S3502

    Saluki S3502 series spectrum analyzer is adopted with the compact portable box structure, which has advantages of small size, light weight, low power consumption and convenient carrying. The S3502 series spectrum analyzer series currently consists of four types of products.

     

    Learn more

  • , ,

    Saluki S3302

    Saluki S3302 series handheld/ portable spectrum analyzer is a high frequency handheld instrument. It provides multi-functions to fullfill different requirements from users. S3302 handheld spectrum analyzer has a compact design, very suitable for on-site measurement. S3302 series handheld/ portable spectrum analyzer can be applied to the signal and equipment test in aerospace, microwave and satellite communications, wireless communications, radar surveillance, electronic warfare and electronic surveillance, precision-guided and other industries.

     

    Learn more

  • , ,

    Saluki S2438

    S2438 series microwave power meter is composed of a host of microwave power meter and a series of microwave power sensors. S2438 series have a wide frequency band, large dynamic power range, high precision, fast measurement and analysis, serialization of sensors.

     

    Learn more

  • , ,

    Saluki S1465

    S1465 series microwave signal generators, with the frequency range of 100kHz – 67GHz, are provided with high purity spectrum and high output power. The single side band phase noise at 10GHz carrier and 10kHz frequency offset is -126dBc/Hz. The maximum output power reaches up to 1W at 20GHz carrier, and the dynamic output power range gets 150dB. All these specifications can meet the high-end requirements of electromagnetic signal tests.

     

    Learn more

  • , ,

    Saluki S1132

    S1132 Series Multi-Standard Signal Generator (9kHz – 6GHz)

    The Saluki S1132 Series RF Signal Generator provides a wide range of product choices for different functional requirements and application scenarios. Each type of product has outstanding features in its function to characterize the focus of its testing field.

     

    Learn more

  • , ,

    TS digital and analogue audio test set

    Self contained touch screen version of the dScope Series III hardware.

    Learn more

  • , ,

    dScope Series III

    The dScope Series III is a comprehensive and powerful measurement system for analogue and digital audio generation and analysis, including digital audio carrier parameters, acoustic transducers and Windows™ sound devices (WDM or ASIO).

     

    Learn more

  • , ,

    dScope M1

    The dScope M1 interface provides the most comprehensive and lowest cost solution for audio electronics and transducer testing.

    Learn more

  • , ,

    TEGAM 1314 RF High Power Calibration System

    TEGAM RF High Power Calibration System

    Calibrate High Power RF Sensing devices up to 250 W with uncertainty less than 1%
    Working standards like a TEGAM 2601A
    Through devices like a Bird Wattmeter
    High Power RF Power Sensors from Keysight, R&S, and Anritsu
    60 Hz to 3000 MHz Frequency Range
    National Lab Traceable through an AC Power Standard

    Learn more

  • , ,

    TEGAM Model 1740

    TEGAM Model 1740 High Speed Microohmmeter, including GPIB & RS-232

    Basic Accuracy: 0.02%
    Measurement Speed: 10 ms
    Range: 20 mΩ to 20 MΩ
    Resolution: 1 µΩ
    Programmable reference currents
    Kelvin Klips, Spade Lugs or Kelvin Probes available
    Easy to operate and easy to integrate
    1-year warranty on this Microohmmeter
    Made in USA

    Learn more

  • , ,

    TEGAM Model 253 LCR

    TEGAM Model 253 LCR Meter Auto-ranging LCR Meter, 1 kHz, Battery Powered

    Basic Accuracy: 0.25%
    Measurement Speed: 250 ms
    Test Frequency: 1 kHz
    Automatic L, C, R, G and D measurements
    Auto Ranging
    Shielded Kelvin Connections
    Rechargeable Battery Power Pack
    Rear Panel External Bias Terminals
    Calibration Certificate Included
    1-year warranty
    Made in USA

    Learn more

  • ,

    DATAQ DI-4718B

    DATAQ DI-4718B Data Acquisition and Data Logger Products
    Measures temperature, pressure, flow, current, voltage, and more using isolated 8B amplifiers. View the DI-8B amplifier selection guide

    Low-Cost, Portable, USB or Ethernet Data Logger

    Eight DI-8B signal-conditioned analog inputs. Expandable with ChannelStretch™ (Unlock code required for each instrument)

    Stand-alone data logger option allows in-the-field measurements to be saved to flash memory (unlock code required for each instrument to record all channels to flash memory)

    Up to 16-bit analog to digital conversion

    Learn more

  • ,

    DATAQ Model DI-4108-U

    DATAQ    Model DI-4108-U
    USB DAQ and Data Logger, 12 to 16-bit resolution, 160,000 S/s Throughput, Records to USB flash drive
    Includes a DI-4108 instrument, a 6-foot USB cable, a screwdriver for signal connections, and a USB flash drive with WinDaq/Lite software (downloadable at run.dataq.com) and an NIST-traceable calibration certificate (.pdf)

    Provided with WinDaq/Lite Software, which records up to four channels at any sampling rate.  WinDaq/Unlock code required per device for data synchronization in WinDaq.

    Stand-alone capability to USB thumb drive (Unlock Code required to record all channels to USB thumb drive – See Accessories)

    Up to 160,000 Hz Sample Throughput Rate using WinDaq Acquisition software

    Up to 160,000 Hz Sample Throughput Rate in stand-alone mode using high speed microSD card

    12 to 16-bit analog-to-digital resolution (Calculate Resolution)

    Programmable ranges: ±200, ±500 mV, ±1, ±2, ±5, ±10 V full scale

    Eight armored analog differential inputs*

    Up to 120 V rms without damage

    Learn more

  • ,

    DATAQ Model DI-808

    DATAQ Model DI-808
    Eight-channel Web-based Voltage, Thermocouple, and Pulse Data Logger
    Includes a DI-808 instrument, a screwdriver for signal connections, a power supply, and an NIST-traceable calibration certificate

    No software to install

    Intelligent data logger with built-in web server works with with any device using a modern web browser

    Stores data locally to internal flash memory or a USB thumb drive and/or remotely to any accessible server or email address

    Allows remote real time display and configuration

    Eight differential and isolated analog input channels programmable as voltage or thermocouple per channel measuring ±10mV, ±25mV, ±50mV, ±100mV, ±250mV, ±500mV, ±1V, ±2.5V, ±5V, ±10V, ±25V, or ±50V; or Thermocouple types J, K, T, B, R, S, E, or N

     

    Learn more

  • Probing Accessories

    Wentworth’s complete range of wafer probing accessories and options is designed to complement and enhance the capabilities and performance of its wafer probe stations. A global support team offers expert capability to design and develop solutions, to help you create ideal conditions for accurate, reliable and repeatable test results.

    Learn more

  • Probe Cards

    With specialist probe card facilities based in Europe and North America, Wentworth builds a wide range of standard and custom cantilever probe cards based on epoxy and blade technologies.

    Its epoxy probe cards can accommodate high pin counts and benefit from competitive pricing and quick turn-around times. The company also has the expertise to build blade probe cards and offer a wide range of parts for their repair. All probe cards are supported by a fast maintenance and repair service.

    Learn more

  • Production Wafer Probers

    Wentworth’s range of production wafer probers offers rapid probing with a choice of semi-automatic, fully automatic and double-sided wafer probing platforms. They are ideally suited for characterization of wafer sizes from 2” to 12″ (up to 300 mm), for full or partial wafers.

    All Wentworth’s production wafer probers utilize the Pegasus™ controller architecture which provides a robust and reliable production platform. All stages are controlled by Pegasus™ consisting of the drive electronics, joystick, keypad and optional Windows user interface. Interfacing is easy with TTL, GPIB (IEEE488.2) and RS232 ports located on the back panel.

    Boasting a full range of accessories including manipulators, enclosures, antivibration tables, prober control software, chucks, optics and lasers means that each prober can be fully customized for your specific application.

    Learn more

  • Analytical Wafer Probers

    Wentworth offers a range of high precision analytical wafer probe stations including semi-automatic and manual probers for wafer sizes up to 300 mm to suit your budget. Experienced teams of consultants and global representatives can configure a full turnkey solution to suit your specific needs.

    Specifically designed for failure analysis, device characterization and other analytical testing, all probe stations benefit from a full range of prober accessories including manipulators, enclosures, antivibration tables, prober control software, chucks, lasers and optics. This means you can upgrade your wafer probe station at any time to suit future probing goals.

    Learn more

  • , ,

    X100MRX

    4K/18G HDBT Rx (100m) with USB, LAN, ARC, L/R Audio In, L/R Audio Output De-Embed, IR, RS-232 (Receiver Only) – Shipping Q3 2019

    imgres

    Learn more

  • , ,

    X40MRx

    4K/18G HDBT Rx (40m) with L/R Audio De-Embed, IR, RS-232 (Receiver Only)

    imgres

    Learn more