-
EXTENDER, Multimedia, USB, USB Extenders
KD-XUSB2
USB 2.0 over CAT maximum 50M Extender, 2×1 USB A to B HUB, any CAT5e/6 cable length up to 50m, RJ45 interface for CAT5e/6, Support Video, Audio, KVM and generic USB connectivity
-
KD-X100MRx
4K/18G HDBaseT Rx (100m) with USB, LAN, ARC, L/R Audio In, L/R Audio Output De-Embed, IR, RS-232 (Receiver Only)
-
Multimedia, Presentation Switchers
DX-TX-4K60
The DXLink 4K60 HDMI Transmitter Module is ideal for extending 4K60 4:4:4 video in any situation where the highest video quality is required or when a simple installation is desired:
- Colleges and universities that transmit audio and video within or between classrooms for collaborative or distributed learning.
- Corporations that distribute audio and video within meeting spaces.
- Healthcare facilities distributing high-resolution video within training rooms, simulation rooms, or labs.
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
X100MRX
4K/18G HDBT Rx (100m) with USB, LAN, ARC, L/R Audio In, L/R Audio Output De-Embed, IR, RS-232 (Receiver Only) – Shipping Q3 2019
-
EXTENDER, Multimedia, Pro av digital system, USB
500072
The USB 2.0 4-Port Extender Kit enables USB 2.0 connectivity over Cat5e/6 at data rates up to 480Mbps & extends true USB up to 328ft / 100m over single Cat5e/6 cable.
This USB 2.0 4-Port Extender Kit is true plug and play, it requires no additional software drivers, and is compatible with all major operating systems.
The unit supports a wide variety of USB extension applications including security, industrial control, digital signage, scientific data acquisition and other implementations of USB standards.
-
EXTENDER, Multimedia, Pro av digital system, USB
500457
This HDMI extender 4K with USB allows one HDMI 1.4 and one USB 2.0 channel to be transmitted up to 330ft (100m) at all resolutions up to 1920×1200 @ 60Hz via one (1) Cat 5e/6 cable in a point-to-point configuration. The receiving side includes a 4-port USB 2.0 hub, supporting KVM applications. Bi-directional IR transmission is supported.
Typical KVM Applications:
- Commercial and residential AV systems
- Classroom projector system
- Boardroom systems
- Collaborative PC systems
- Medical information systems
-
EXTENDER, HDMI, Multimedia, Pro av digital system
500462
The HDMI Optical Isolator (500462) allows HDMI equipment to be completely isolated and connected up to 984ft (300m), while allowing a unidirectional communication (with no return signaling) via one (1) LC 50/125 μm OM3 multimode fiber cable in a point-to-point configuration at 1080p resolution.
The HDMI Optical Isolator establishes a high separation between the source computer and the display devices preventing any potential leakage between the source and the peripheral equipment; removing the vulnerability of shared display equipment to cyber-attacks.
The kit comes with one (1) Transmitter, one (1) Receiver and two (2) power supply.
-
EXTENDER, HDMI, Multimedia, Pro av digital system
500459-100
The HDMI/RS232 100m Extender Kit, HDBT, 4K/60 allows HDMI equipment to be connected up to 230ft (70m) at 4K/60 (4:4:4) resolution, or 330ft (100m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. The unit is HDCP 2.2 compliant and supports HDR, as well as RS232 and bidirectional IR pass through transmission for end device remote control. This HDMI extender 4K supports PoC, allowing the transmitter to power the receiver, or the receiver to power the transmitter. The HDMI extender 4K kit includes one (1) transmitter, one (1) receiver, one (1) IR Emitter, one (1) IR sensor and one (1) power supply.
-
EXTENDER, HDMI, Multimedia, Pro av digital system
500451-POE
This HDMI extender 4K allows HDMI equipment to be connected up to 131ft (40m) at 4K/30 (4:4:4) or 4K/60 (4:2:0) resolutions, or 230 ft (70 m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. This HDMI extender 4K kit comes with one (1) transmitter, one (1) receiver, one (1) IR Emitter, and one (1) IR sensor.
-
EXTENDER, HDMI, Multimedia, Pro av digital system
500404
The HDMI / Bi-IR Extender Kit allows HDMI equipment to be connected via one Cat 5e/6 unshielded twisted pair cables in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control applications. Four (4) mounting Ear are also provided for wall-mount applications
-
KVM OVER IP, Multimedia, Pro av digital system
500770
The USB KVM Extender over IP PoE allows HDMI & USB equipment to be connected up to 330ft (100m) over an Ethernet LAN, supporting 1920×1200 and 1080p resolution @ 60Hz via Cat5e/6 cable in multiple point-to-point and point-to-multipoint configurations. The Transmitter (500770-TX) and Receiver (500770-RX) support PoE (PD) if used with a PoE (PSE) Ethernet Switch.
The Transmitter terminates to a computer server/workstation via an HDMI & USB port, The Receiver terminates to an HDMI display and up to 4 USB devices such as a keyboard, mouse, printer, drawing pad, storage device, camera, etc., via a 4 port USB hub. A single Receiver can be switched via hotkey sequences to any Transmitter on the network, allowing a single operator to manage numerous servers/workstations, in a distributed KVM application.
-
AV OVER IP, Multimedia, Pro av digital system
500762
The HDMI over IP H.264/H.265 PoE Extender Transmitter and Receiver combination allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, and supports Video Wall and Multiview capabilities in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz. These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
-
AV OVER IP, Multimedia, Pro av digital system
500759
Finally get the 4K video wall display you have always wanted with this HDMI 4K over IP solution which allows HDMI equipment supporting up to 4K @ 30Hz or 1080p at 60Hz resolution to be connected and extended to create a video wall of user-configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one Receiver for each display in the array. Transmitter (500759-TX) and Receiver (500759-RX) can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch. The Transmitters and Receivers support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch. The IR Emitter and IR Sensor, if required, may be purchased separately for IR based remote control applications. Look no further for video over IP solutions.
The MuxLab Pro Digital Network Controller (500811) is available to simplify configuration and control and allows for third-party smartphone and tablet management.
-
AV OVER IP, Multimedia, Pro av digital system
500754
The HDMI over IP PoE Extender allows HDMI equipment to be connected to create a Video Wall of a user configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one receiver for each display in the array.
The transmitter unit is connected using a LAN switch (PoE or non-PoE), with maximum distances of 330ft (100m) of Cat5e/6 cable between equipment.
Set-up and configuration of the video wall function is carried out using the MuxLab ProDigital Network Controller (500811) – sold separately.
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
UPS52U
4K/18G USB/Universal Presentation Switcher with 5 Inputs (HDBT, 2x HDMI, DP, USB-C), 2 Mirrored Outputs (HDBT, HDMI), LAN, ARC, Audio De-Embed, IR, RS-232, IP Control, CEC Manager™. Includes Rx. – Shipping Q3 2019
Included:
X100MRX
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
PS42
4K/18G Presentation Switcher with 4 Inputs (HDBT, 3x HDMI), 2 Mirrored Outputs (HDBT, HDMI), Audio De-Embed, IR, RS-232, IP, CEC Manager™. Includes Rx. – Shipping Q3 2019
Included:
X40MRX
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
MLV4x2PRO
4×2 4K POH/HDBaseT/HDMI/VGA Multi-View Seamless Presentation Matrix Switcher. (Includes 1 Rx Extender)
Included:
X222PO
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
500435
The 5×1 HDMI / HDBT Presentation switch is a compact scaler switcher with 5 video inputs (3 HDMI, 2 VGA) and 6 audio inputs (3 HDMI audio & 2 VGA with audio switched following the video; 1 MIC audio input). The VGA input supports VGA, Component Video (YPbPr) and Composite Video.
The 5×1 HDMI / HDBT Presentation switch scales & switches any video signal to HDMI output and HDBaseT output for a transmission over up to 70 m of Cat5e/6 with PoC support.
With 1 IR Sensor, 5 IR Emitters and 1 RS232 port, bidirectional IR & RS232 signals can be transmitted simultaneously between the 5×1 HDMI / HDBT Presentation switch and the HDMI Extender PoC/PoE Receiver.
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-LZ-D
2 Channel DSP-Enabled Amplifier
2 x 100W @ 4/8 Ohms
Dante™ Network EnabledThe DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- 2 Dante™ input channels
- Remote Volume Control
- Made in the USA
-
MC2, Multimedia, Pro Audio solutions
Delta 40DSP
Combining new technology power amplification with the highest definition XTA DSP, the Delta Series offers performance and convenience at a whole new level.
Powerful processing features, such as FIR filtering and Dante networking, work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single Delta DSP amplifier can control a stereo 4-way system with no external processing.
Configure and tune using a fast, powerful combination of Audio Core (XTA’s fast efficient control software platform) and Delta Direct, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored, wirelessly. USB, direct Ethernet and RS485 control options plus configurable GPIO offer unparalleled flexibility.
All MC² Audio products are covered by a 5 year warranty.
-
MC2, Multimedia, Pro Audio solutions
DELTA 20
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
All MC² Audio products are covered by a 5 year warranty.
-
Multimedia, Pro Audio solutions, stewartaudio
MC850-LZ-D
8 Channel Dante™ / AES67 Amplifier
50W x 8 @ 4/8 Ohms
Dante™ Network EnabledThe MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.
- 8 independent Dante™ inputs
- Primary and Secondary Dante™ ports (redundant or switched)
- Ethernet port for control and reporting
- RS-232 control
- Power sharing up to 125W per channel
- Compact 1RU enclosure
- Made in USA
-
Multimedia, Pro Audio solutions, stewartaudio
MC850-CV-D
8 Channel Dante™ / AES67 Amplifier
50W x 8 @ 70V/100V
Dante™ Network EnabledThe MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.
- 8 independent Dante™ inputs
- Primary and Secondary Dante™ ports (redundant or switched)
- Ethernet port for control and reporting
- RS-232 control
- Power sharing up to 100W per channel
- Compact 1RU enclosure
- Made in USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-LZ
2 Channel DSP-Enabled Amplifier
2 x 100W @ 4/8 OhmsThe DSP100-2-LZ is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- Not Dante™ Networked (See DSP100-2-LZ-D)
- Remote Volume Control
- Made in the USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-CV-D
2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100V
Dante™ Network EnabledThe DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-CV-D supports Dante™ audio.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- 2 Dante™ input channels
- Remote Volume Control
- Made in the USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-CV
2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100VThe DSP100-2-CV is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- Not Dante™ Networked (See DSP100-2-CV-D)
- Remote Volume Control
- Made in the USA
-
DSP 4×4
DSP4x4 Features: • 4 channels of DSP processing • Configurable via USB port • RS-232 connection for live changes • 1/3 rack package & convection cooled • Made in the USA • Matrix Mixer • 9 bands of parametric filters per channel • Priority signal ducker • 100ms of delay per channel
Applications: • Hospitality Installations • Board Rooms • Classrooms • Conference Rooms • House of Worship • Remote Locations • Distributed or centralized venues • Room combining -
CVA 50 MX 1
CVA50MX-1 CVA50PMX-1 25W x 2 @ 4/8 Ohms 50W x 1 @ 25V/70V or 25V/100V Features: • Sub Compact 1/3 rack package • 4 input mono mixer amplifier
• Music and fire alarm muting • Clean full–range dynamic power • Signal Detect trigger for sleep & wake up • Multiple mounting options • External inline power supply • Made in the USA
Applications: • Boardrooms & classrooms • AV projection systems • Lecterns and Podiums • Plenum applications, UL 2043 rated • Pole mounting option • Fixed installations with mixer amplifiers located in listening environment • Applications where traditional mixer amplifiers won’t fit • Behind flat screen televisions -
CVA 50 – 1 net
Mono Dante™
Subcompact Amplifier – 50W x 1 @ 70V/100VMono constant voltage networked amplifier in a subcompact, 1/3 rack form factor.
- Mono networked endpoint
- External inline power supply
- Line out
-
AV25-2
AV25-2 RS232
35W x 2 @ 4 Ohms 25W x 2 @ 8 Ohms
Features: • Sub Compact 1/4 rack package • Two channel amplifier optimized to drive 4 Ohm and 8 Ohm loads
• RS232 control over volume and muting • Set discrete values • Multiple mounting options • External inline power supply • Made in the USA
Applications: • Boardrooms & classrooms • Hospitality • Lecterns & podiums • Pole mounting option • Fixed installations with mixer amplifiers located in listening environment • Applications where traditional amplifiers won’t fit • Behind flat screen televisions -
Key digital Pro AV Digital Systems, Multimedia
KD-CX800
Control Interface with IR and RS-232 over IP Routing
KD-CX800 is a control over IP device with three multi-function control ports supporting
bi-directional RS-232, IR out (emitter), IR in (sensor or hardwire), voltage trigger, or
voltage sensor. -
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
Microphone ES947/LED
ES947/LED
CARDIOID CONDENSER BOUNDARY MICROPHONE WITH LED
- Contractor-exclusive innovations for every acoustical challenge
- Safe haven from Radio Frequency Interference (RFI)
- Low-profile cardioid condenser boundary microphone
- Designed for clear, highly intelligible sound reinforcement, teleconference
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Available in black (ES947/LED) or white (ES947W/LED)
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
ES947
ES947
CARDIOID WIDE RANGE FIXED CHARGE CONDENSER BOUNDARY MICROPHONE
- Designed for surface-mount applications
- Cardioid polar pattern with 120º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Isolators provide mechanical dampening of mounting-surface vibration
- Operates on 9-52V phantom power only
- UniGuard® RFI-shielding technology
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
MICROPHONE ES945/LED
ES945/LED
OMNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE WITH LED
- Contractor-exclusive innovations for every acoustical challenge
- Safe haven from Radio Frequency Interference (RFI)
- Low-profile omnidirectional condenser boundary microphone
- Designed for clear, highly intelligible sound reinforcement, teleconference
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Disponible en deux coloris : blanc (ES945W/LED) ou noir (ES945/LED)
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
ES945
ES945
OMNIDIRECTIONAL FIXED CHARGE CONDENSER BOUNDARY MICROPHONE
- Designed for surface-mount applications
- Omnidirectional polar pattern with 360º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Isolators provide mechanical dampening of mounting-surface vibration
- Operates on 9-52V phantom power only
- UniGuard® RFI-shielding technology
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
ES935SC6
ES935SC6
CARDIOID CONDENSER GOOSENECK MICROPHONE WITH LIGHTING MUTE SWITCH
- Designed for professional recording and demanding sound pickup applications
- Mute switch in base lights to indicate operational status of the microphone
- Low-profile element provides uniform cardioid polar pattern
- Unobtrusive design with an overall length of only 197.3 mm
- Plugs into any standard XLRF-type connector
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
ES915SC
ES915SC
CARDIOID CONDENSER GOOSENECK MICROPHONE WITH MUTE SWITCH/LED
- Designed for professional recording and demanding sound pickup applications
- Low-profile element provides uniform cardioid polar pattern
- Plugs into any standard XLRF-type connector
- Included low-profile isolation mount attenuates noise, shock and vibration
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
RIGID-PIPE MICROPHONE ES905CL
ES905CL
CARDIOID RIGID-PIPE CONDENSER MICROPHONE
- Designed for high-quality sound reinforcement and professional recording
- Low-profile element provides uniform cardioid polar pattern
- Rigid-pipe design with ball-in-socket base permits flexible positioning
- Sturdy metal base mounts to table, desk or podium with included hardware
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom power
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
ATND8677
ATND8677
MICROPHONE DESK STAND WITH DANTE™
- Connects directly to Dante network via Ethernet cable
- Integrated user switch controls talk/mute in Local mode
- Integrated user switch triggers Dante-enabled devices in Remote mode
- Powered by network PoE
- Scalable across Dante’s 512 bidirectional audio channels
- Touch-sensitive capacitive-type user switch
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
ATND971
ATND971
CARDIOID CONDENSER BOUNDARY MICROPHONE WITH DANTE™
- Bridges the gap between audio and IT
- Transmits audio and control data together over Audinate’s Dante™ network
- Perfect fit for boardrooms and other meeting spaces
- Supports up to 512 bidirectional audio channels
- Easy to install and operate
- Features UniGuard® RFI-shielding technology and UniSteep® low-cut filter
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO49QL
PRO49QL
CARDIOID CONDENSER QUICK-MOUNT GOOSENECK MICROPHONE, 418MM
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- Quiet, fixed-placement long-life gooseneck
- Plugs into any standard XLRF-type surface or cable connector
- Also available in a 13.07″ (332.0 mm) as PRO49Q
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO47TL
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- Quiet, fixed-placement, long-life gooseneck
- 3.0 m cable permanently attached between microphone and XLRM connector
- Requires 9V to 52V DC phantom power
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO45
PRO45
CARDIOID CONDENSER HANGING MICROPHONE, BLACK
- Hi-SPL handling is ideal for suspension over choirs and orchestras
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- 7.6 m cable permanently attached between microphone and XLRM connector
- Also available in white as PRO45W
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO44
PRO44
UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
- Very low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25′ (7.6 m) detachable cable (TA3F to XLRM-type)
- Dimensions 73mm x 90.5mm x 15mm
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO42
PRO42
MINIATURE UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
- Very low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm
- Uniform polar pattern for maximum rejection of unwanted sounds
- Rugged design and construction
- 7.6 m cable permanently attached between microphone and XLRM connector
- Dimensions 36.6mm x 54.3mm x 15.5mm
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, UniPoint
U857Q
CARDIOID CONDENSER QUICK-MOUNT GOOSENECK MICROPHONE, 365MM
- Designed for high-quality sound reinforcement
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology
- UniSteep® filter
- Self-contained electronics eliminate need for external power module
- Accepts interchangeable elements
-
Installation Microphones, Multimedia, Pro audio microphones, UniPoint
U855QL
CARDIOID DYNAMIC GOOSENECK MICROPHONE, 448MM
- Designed for use as a high-quality talk-back, paging & dispatch microphone
- Extremely rugged all-metal construction for long-lasting performance
- Quick-mount design with 3-pin XLRM-type connector
- Low-profile element provides uniform cardioid polar pattern
- Rugged gooseneck permits quick positioning
- Frequency response tailored for excellent intelligibility
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, UniPoint
U853A
CARDIOID CONDENSER HANGING MICROPHONE
- Designed for suspension over choirs, instrumental groups and theater stages
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of RF
- UniSteep® filter provides a steep low-frequency attenuation
- Accepts interchangeable elements
- Operates on battery or phantom power
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, UniPoint
U851R
CARDIOID CONDENSER BOUNDARY MICROPHONE
- Ideal for sound reinforcement, professional recording and conferencing
- PivotPoint® rotating output connector
- Superior off-axis rejection for maximum gain before feedback
- Outstanding rejection of radio frequency interference (RFI)
- Small-diameter UniPoint capsule near boundary
- Available in two colors: black (U851R) and white (U851RW)
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, UniPoint
U843R
THREE CHANNEL BOUNDARY CARDIOID CONDENSER MICROPHONE
- Each element can be powered and used individually or in any combination
- Designed for surface-mount applications such as highquality sound reinforce
- Ideal for a variety of video and audio conferencing application
- Small-diameter UniPoint capsule near boundary eliminates phase distortion
- Technology UniGuard™ offers outstanding rejection of RFI
- Low-profile design with low-reflectance finish for minimum visibility
-
Installation Microphones, Pro audio microphones, Pro Audio solutions, UniPoint
U841A
- Ideal for sound reinforcement, professional recording and conferencing
- Outstanding rejection of radio frequency interference (RFI)
- UniSteep® filter provides a steep low-frequency attenuation
- Small-diameter UniPoint® capsule near boundary eliminates phase distortion
- Heavy die-cast case and silicon foam bottom pad
- Operates on battery or phantom power
-
HDMI / Over IP Extender Systems, Multimedia, Pro AV Digital Systems
Cisco SG300-10P
10-PORT GIGABIT POE MANAGED SWITCH (PRE-CONFIGURED)
-
HDMI / HDBaseT Matrices &Extenders, Multimedia
500404 – HDMI / BI-IR EXTENDER KIT
The HDMI / Bi-IR Extender Kit allows HDMI equipment to be connected via one Cat 5e/6 unshielded twisted pair cables in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control applications. Four (4) mounting Ear are also provided.


