-
General Laboratory Instruments, Lock-in Amplifiers, Test & Measurement
Model LI5600
Lock-in Amplifiers that measure extremely small alternating signals hidden deep within noise, are used in a wide range of advanced research fields, including scanning probe microscopes, terahertz spectroscopy and spintronics.
NF's newest lock-in amplifier LI5600 series is 2-phase, 2-frequency digital lock-in amplifier that delivers a high level of stability with post-phase detection digital signal processing. The series covers all areas of key functionality required for increasing reliability when measuring very small signals, such as an outstanding dynamic reserve up to 100 dB, update rates up to approximately 1.5 M samples/s (LI5660/LI5655), and smooth, high-speed 16-bit amplitude resolution output response.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
SFL Series
SFL Series DC Electronic Load, is capable for 300W/1000W. Its fast-current feedback control helps to reduce current overshoot during rise-up. The minimum operation voltage is not restricted in which can help the current to flow from 0A up to set-current proportionally, just like “electronic resistor”.
Several operation modes are also available, such as CC (Constant Current), CV (Constant Voltage), CP (Constant Power), to simulate many kinds of load test conditions for customer application -
DC Power Supplies, Power Sources & Measurement, Test & Measurement
GenesysTM
TDK-Lambda Genesys™ Series sets the standard for flexible, reliable, AC-DC power systems in OEM, Industrial and Laboratory applications with the highest power density in 1U, 2U or 3U sizes at a competitive price.
Features:
Highest Power Density Available
Available in 1U, 2U or 3U sizes
Wide Range Input
Active Power Factor Correction
Built-in RS-232 & RS-485 Interface
Last Setting Memory
Five Year Warranty -
DC Power Supplies, Power Sources & Measurement, Test & Measurement
Brand Z+
Brand Z+ series of 2U height bench top CVCC programmable DC power supplies, output voltage up to160 VDC, 320 VDC, and 650 VDC.
-
Ethernet Adapters and Extenders, Industrial Instruments, Test & Measurement
IOLAN SCG R/U
Perle IOLAN SCG R/U Console Servers provide data center managers with secure remote console management of any device with an RS232 RJ45 or USB console port. With an expandable modular hardware platform, advanced security features, and built-in redundancy features, your IT professionals and network operations center (NOC) personnel will have everything they needed to easily perform secure remote data center management and out-of-band management of IT assets from anywhere in the world. The unique design also provides users with a flexible, cost-effective solution to transmit data from mission critical equipment over Copper or Fiber based Ethernet networks.
-
Ethernet Adapters and Extenders, Industrial Instruments, Test & Measurement
eXP-S1110
Perle eXP-S1110 PoE Gigabit Ethernet Extenders transparently extend Ethernet beyond the general IEEE 802.3af limits of 328ft / 100m while providing Power over Ethernet ( PoE ) to standards-based compliant devices such as IP cameras, VoIP phones and wireless access points.
-
Ethernet Adapters and Extenders, Industrial Instruments, Test & Measurement
SFP to SFP Media Converters
Protocol Transparent Fiber Mode Conversion
SFP to SFP Media Converters are used to interconnect two fiber connections back to back. Because they are protocol independent, they are not limited to specific data types and can pass all protocols, including, but not limited to: Ethernet, SDI, Video, Fibre Channel, ATM/SONET OC-X, SDH STM-X, and FDDI.. Additionally, they support SFP transceivers with data rates up to 4.25 Gbps. -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-USB / 2
USB-CAN interface for USB 2.0
Powerful CAN-USB interface for PCs
The CAN-USB / 2 module is an intelligent CAN interface with an ARM 7 microcontroller that takes over the local data management of the CAN data. The module supports the USB 2.0 high-speed interface with data rates of 480 Mbit / s. -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model ECS-PCIe / FPGA
PCI Express® EtherCAT® slave interface
Turn your PCI Express system into an EtherCAT slave device
Expand your PCI Express system with EtherCAT slave (ECS) functions
The memory area of the EtherCAT slave controller is mapped directly in the PCI Express address space.Easy configuration and fast application development
Simple configuration with the esd EtherCAT master or other EtherCAT masters
Example of an EtherCAT slave information file (ESI file in XML format) included
esd EtherCAT slave API library and sample code for a quick introduction to application development are included in the scope of deliveryBus master support
The FPGA supports bus master DMA to relieve the CPU of copying the process image output data to the host memory. This function is used by the esd EtherCAT slave stack.
Customization on request -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-PCIe / 402
PCI Express® board with up to 4 CAN or CAN FD interfaces
Single Lane PCIe board with Altera FPGA for up to 4x CAN (FD)
CAN bit rates from 10 kbit / s up to 1 Mbit / s
PCIe® interface according to PCI Express specification R1.0a
MSI (Message Signaled Interrupts) support
CAN termination can be activated on-board
Comprehensive operating system support and extended CAN diagnostics
Software drivers and support for higher protocols for Windows®, Linux®, VxWorks®, QNX®, RTX, RTX64 and other operating systems -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-PCI / 400
2 or 4 channel PCI-CAN interface card (Layer 2, CANopen®, J1939 or ARINC825)
PCI plug-in card for up to 4x CAN
2x or 4x high-speed CAN interfaces according to ISO 11898-2
PCI interface according to PCI Local Bus Specification 2.2
esd Advanced CAN Core (esdACC) technologyBus mastering and local data management via FPGA
Software drivers for Windows® and Linux® included free of charge in the scope of delivery
Real-time operating systems and higher-layer protocols CANopen, J1939 and ARINC825
Software drivers for Windows, Linux, VxWorks®, QNX®, RTX, On Time RTOS-32 and other operating systems
CANopen, J1939 and ARINC825 protocol libraries available
Extended CAN diagnostics
Extended diagnostic functions
Supports CAN error simulation, e.g. CAN error injection
High resolution hardware timestamp
Powerful interface for PCs -
Battery Analyzers, Battery Testers and Chargers, Test & Measurement
IT5100 Battery Tester
IT5100 series is a series of battery internal resistance testers with high precision, high resolution and high speed. IT5100 adopts AC 4-terminal sensing, that means the tester can test internal resistance and voltage simultaneously with high precision. Resistance resolution is down to 0.1 μΩ, voltage resolution is 10 μV.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
Model IT8600 AC Electronic Load
IT8600 is ITECH latest series of AC/DC electronic loads with power range 0~14.4 kVA and adjustable frequency 45 Hz ~ 450 Hz. The unique oscilloscope waveform display function of IT8600’s can display input voltage & current as waveform.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
Model IT-M3300 Regenerative DC Electronic Load
IT-M3300 regenerative DC electronic load can not only simulate various load characteristics, but also can feed back electrical energy to the local grid instead of heat. With high power density design, it can provide up to 800W power absorption with tiny body of only 1U half-rack.
-
AC Power Sources, Power Sources & Measurement, Test & Measurement
Model IT7900 Regenerative Grid Simulator
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc.
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
Model IT-M3200 High Precision Programmable DC Power Supply
IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
IT6000B Regenerative Power System
ITECH launches a new incorporated product–IT6000B series. IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one.
IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW.
-
EXTENDER, Multimedia, USB, USB Extenders
KD-XUSB2
USB 2.0 over CAT maximum 50M Extender, 2×1 USB A to B HUB, any CAT5e/6 cable length up to 50m, RJ45 interface for CAT5e/6, Support Video, Audio, KVM and generic USB connectivity
