-
-
AV Control Systems, AV OVER IP, Multimedia
NMX-ENC-N2615D-WP
Instruction Manual – AMX N26x5D Wallplates
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
AV Control Systems, AV OVER IP, Multimedia
NMX-DEC-N2625D-WP
Instruction Manual – AMX N26x5D Wallplates
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
AV Control Systems, Multimedia, Touch Panel & Keypads
VARIA-150N
Configuration & Programming Manual – Varia Touch Panels
-
AV Control Systems, Multimedia, Touch Panel & Keypads
VARIA-150
Configuration & Programming Manual – Varia Touch Panels
-
AV Control Systems, Multimedia, Touch Panel & Keypads
VARIA-100N
Configuration & Programming Manual – Varia Touch Panels
-
AV Control Systems, Multimedia, Touch Panel & Keypads
VARIA-100
Configuration & Programming Manual – Varia Touch Panels
-
AV Control Systems, Multimedia, Touch Panel & Keypads
VARIA-80
Configuration & Programming Manual – Varia Touch Panels
-
AV Control Systems, Multimedia, Touch Panel & Keypads
VARIA-SL80
Configuration & Programming Manual – Varia Touch Panels
-
AV Control Systems, Multimedia, Touch Panel & Keypads
VARIA-SL50
Configuration & Programming Manual – Varia Touch Panels
-
-
-
-
-
Phase Meters and Standards, PAV, Test & Measurement
CLARKE-HESS Model 7600 Distortion Analyzer
CLARKE-HESS Model 7600 Distortion Analyzer
The Model 7600 Distortion Analyzer is unlike any other product of its kind on the market. Using the latest digital techniques and optimally designed analog front end, the Model 7600 out-performs any other distortion analyzer on the market today.
- 3% full scale Accuracy
- 0.001% Resolution
- 10Hz to 600kHz Frequency Response
- Hi Resolution Color Display
- Isolated Input
- IEEE-488, USB
- Distortion readings to almost 100%.
-
Phase Meters and Standards, PAV, Test & Measurement
CLARKE-HESS Model 5600 Phase Standard
CLARKE-HESS Model 5600 Phase Standard
By using the latest digital techniques and optimally designed output circuitry the Model 5600 offers high accuracy, voltage range and low distortion. It covers a wide frequency range, can drive loads of up
to 30 mA and a full decade of higher resolution.
- 1Hz to 1MHz Frequency Response
- 1m Degree Resolution
- Phase Accuracy: 5m Degrees
- Output Current Over 30mA
- 50mV to 120V
- Hi Resolution Color Display
- USB and IEEE Interface
-
Phase Meters and Standards, PAV, Test & Measurement
CLARKE-HESS Model 2600 Phase Angle Voltmeter
CLARKE-HESS Model 2600 Phase Angle Voltmeter
The Model 2600 Phase Angle Voltmeter, with the latest and most advanced DSP technology, provides a new level of performance and user friendliness. In addition, the Model 2600 Phase Angle Voltmeter is considerably less expensive than other “traditional” Phase Angle Voltmeters. By keeping classic measurements, “at the touch of a button”, the Model 2600 behaves more like an instrument and less like a computer. The unit is extremely easy to use yet contains a host of features and performance characteristics that set it apart from all others.
Specifically targeted at Synchro/Resolver and LVDT/RVDT applications, this instrument makes measurements of Phase Angle, In-Phase, Quadrature, Fundamental and Total a breeze.
- Graphical Color Display
- Isolated inputs
- 010º Phase Accuracy
- 001º Phase Resolution
- On Board 15 VA Reference Gen. (Optional)
- True LVDT with third Channel Capability
- IEEE-488, USB, optional LAN
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
iDAQ-WTCAN
YOKOGAWA iDAQ-WTCAN WT-CAN Adapter for Power Analyzers
Customized to use with Yokogawa Test & Measurement power analyzers, the iDAQ-WTCAN Adapter collects
measurement data from a connected power analyzer via Ethernet. The data is converted into CAN messages and sent to the CAN Bus. Simultaneously, the iDAQ-WTCAN Adapter is able to receive CAN Bus messages that can change common settings related to the connected power analyzer. -
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT5000
YOKOGAWA Model WT5000 Precision Power Analyzer
The WT5000 is the Next Generation in Precision of Yokogawa’s Power Analyzers product line. It is a versatile platform that delivers extraordinary precision and exceptional performance for the most demanding applications. Equipped with 7 user swappable and reconfigurable input elements plus 4 motor channels, the WT5000 is an ideal instrument for both electrical and mechanical power and efficiency measurements. Its highly responsive touchscreen, intuitive menu operations, and out of the box software solution make the WT5000 an ideal instrument for your testing needs.
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
IT-M3900B
ITECH IT-M3900B Series Regenerative power system
IT-M3900B regenerative power system feature two-in-one, which could use as a bidirectional DC power supply, also act as an independent regenerative load. One-button-switch between source and load mode, a unique and decisive feature for the user groups that works in different applications such as battery, PV energy storage, electric vehicle, Green energy and some ATE fields.
-
AC Power Sources, Power Sources & Measurement, Test & Measurement
IT7800
ITECH IT7800 Series Programmable AC/DC Power Source
ITECH IT7800 3U high series of programmable AC/DC power supply, with power up to 15kVA, voltage ranges up to 350V L-N and 500V
L-N. Users are able to increase output power up to 960kVA by configuring master-slave parallel. With intuitive LCD touch panel interface,
users can be quickly familiar with the unit operation.
IT7800 series is built-in power meter and arbitrary waveform generator, which is able to simulate harmonics and other arbitrary waveform
output. Users can choose single phase, three-phase, phase reversal, and multi-channel totally 4 output modes, with programmable output,
and complete measurements, ITECH IT7800 series is designed for new energy, power electronics, research institutes, etc. -
Battery Analyzers, Battery Simulator, Test & Measurement
BSS2000
ITECH Battery Simulation Test Solution BSS2000/ BSS2000 Pro/ BSS2000M
The BSS2000/BSS2000 Pro/BSS2000M battery simulating software are products specifically designed for the above test scenarios. On the one hand,
it will solve the problem of increasing cost of buying and storage of different types of batteries; On the other hand, the battery simulator can be
quickly set to different state of SoC without real charge and discharge process, greatly improve test efficiency. The advanced version of BSS2000
Pro/BSS2000 M is developed to meet higher level testing requests. Based on the basic version of BSS2000, .mat file importing, BMS protocol
customization and more built-in battery types are provided with the Pro version software. Software combined with ITECH’s latest high-performance
bidirectional DC power supply, IT6000B/IT6000C/IT-M3400/IT-M3600, covering a power range up to 1152kW, can provide users with a wide range
simulation solution covering low-power battery module to high-power power battery system simulation. -
OSCILLOSCOPES, Osciloscopes, Test & Measurement
GP10/GP20
YOKOGAWA Touch Screen GP10/GP20
Industrial processes and test laboratories require rigorous, continuous monitoring in the design, validation, and service stages of product development, product testing, and manufacturing. The GP series is Yokogawa’s latest laboratory recorder, with handle and footstands to enable portable and benchtop use.
The GP series is an industry-first multi-point touch panel, to improve intuitive and smart operator control. Users can scroll, pan, zoom historical data, and even write freehand messages on its dust-proof and water-proof display. It delivers industry leading reliability and measurement accuracy. The GP series is ideally suited for monitoring or troubleshooting long term physical or electrical trends.
New ! Built-in AI function to predict the future
A future pen function that draws a predicted waveform for the future a little ahead.
By setting a future alarm for the predicted waveform, you will be notified in advance of possible future events. -
OSCILLOSCOPES, Osciloscopes, Test & Measurement
DL950
YOKOGAWA DL950 ScopeCorder Data Acquisition Recorder
The DL950 is a unique combination of a mixed signal oscilloscope and portable data acquisition recorder that can be used to capture both high speed transient events and long run trends
Only a ScopeCorder has the right combination of channel count, input types, triggering, and recording to tackle the job of electromechanical systems development and troubleshooting. With its multiple measurement types, excellent performance, and high reliability, the DL950 ScopeCorder will quickly become the most valued instrument in your lab.
-
General Laboratory Instruments, LCR METERS, Test & Measurement
ZM serie
nF ZM series LCR meters cover a wide frequency range, from the low-frequency region of 1 mHz up to 5.5 MHz. Supports a wide range of applications, from materials research to component production lines, by means of high-speed, low measurement fluctuation
-
Frequency Response Analyzer, General Laboratory Instruments, Test & Measurement
Model FRA51615
The FRA51615 is suitable to measure frequency response for many industries from electronic circuits, electronic components, and materials to mechatronics and electrochemical applications. Equipped with the performance and functionality to support many industries, FRA51615 provides highly reproducible measurement data and more efficient testing operations.
The FRA51615 is the newest FRA developed to meet the needs and desires of our customers, and to provide the best user-friendliness, down to the smallest detail, featuring 10μHz to 2MHz, Gain accuracy ±0.01dB, Phase accuracy ±0.06°
-
General Laboratory Instruments, Lock-in Amplifiers, Test & Measurement
Model LI5600
Lock-in Amplifiers that measure extremely small alternating signals hidden deep within noise, are used in a wide range of advanced research fields, including scanning probe microscopes, terahertz spectroscopy and spintronics.
NF's newest lock-in amplifier LI5600 series is 2-phase, 2-frequency digital lock-in amplifier that delivers a high level of stability with post-phase detection digital signal processing. The series covers all areas of key functionality required for increasing reliability when measuring very small signals, such as an outstanding dynamic reserve up to 100 dB, update rates up to approximately 1.5 M samples/s (LI5660/LI5655), and smooth, high-speed 16-bit amplitude resolution output response.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
SFL Series
SFL Series DC Electronic Load, is capable for 300W/1000W. Its fast-current feedback control helps to reduce current overshoot during rise-up. The minimum operation voltage is not restricted in which can help the current to flow from 0A up to set-current proportionally, just like “electronic resistor”.
Several operation modes are also available, such as CC (Constant Current), CV (Constant Voltage), CP (Constant Power), to simulate many kinds of load test conditions for customer application -
DC Power Supplies, Power Sources & Measurement, Test & Measurement
GenesysTM
TDK-Lambda Genesys™ Series sets the standard for flexible, reliable, AC-DC power systems in OEM, Industrial and Laboratory applications with the highest power density in 1U, 2U or 3U sizes at a competitive price.
Features:
Highest Power Density Available
Available in 1U, 2U or 3U sizes
Wide Range Input
Active Power Factor Correction
Built-in RS-232 & RS-485 Interface
Last Setting Memory
Five Year Warranty -
DC Power Supplies, Power Sources & Measurement, Test & Measurement
Brand Z+
Brand Z+ series of 2U height bench top CVCC programmable DC power supplies, output voltage up to160 VDC, 320 VDC, and 650 VDC.
-
Ethernet Adapters and Extenders, Industrial Instruments, Test & Measurement
IOLAN SCG R/U
Perle IOLAN SCG R/U Console Servers provide data center managers with secure remote console management of any device with an RS232 RJ45 or USB console port. With an expandable modular hardware platform, advanced security features, and built-in redundancy features, your IT professionals and network operations center (NOC) personnel will have everything they needed to easily perform secure remote data center management and out-of-band management of IT assets from anywhere in the world. The unique design also provides users with a flexible, cost-effective solution to transmit data from mission critical equipment over Copper or Fiber based Ethernet networks.
-
Ethernet Adapters and Extenders, Industrial Instruments, Test & Measurement
eXP-S1110
Perle eXP-S1110 PoE Gigabit Ethernet Extenders transparently extend Ethernet beyond the general IEEE 802.3af limits of 328ft / 100m while providing Power over Ethernet ( PoE ) to standards-based compliant devices such as IP cameras, VoIP phones and wireless access points.
-
Ethernet Adapters and Extenders, Industrial Instruments, Test & Measurement
SFP to SFP Media Converters
Protocol Transparent Fiber Mode Conversion
SFP to SFP Media Converters are used to interconnect two fiber connections back to back. Because they are protocol independent, they are not limited to specific data types and can pass all protocols, including, but not limited to: Ethernet, SDI, Video, Fibre Channel, ATM/SONET OC-X, SDH STM-X, and FDDI.. Additionally, they support SFP transceivers with data rates up to 4.25 Gbps. -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-USB / 2
USB-CAN interface for USB 2.0
Powerful CAN-USB interface for PCs
The CAN-USB / 2 module is an intelligent CAN interface with an ARM 7 microcontroller that takes over the local data management of the CAN data. The module supports the USB 2.0 high-speed interface with data rates of 480 Mbit / s. -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model ECS-PCIe / FPGA
PCI Express® EtherCAT® slave interface
Turn your PCI Express system into an EtherCAT slave device
Expand your PCI Express system with EtherCAT slave (ECS) functions
The memory area of the EtherCAT slave controller is mapped directly in the PCI Express address space.Easy configuration and fast application development
Simple configuration with the esd EtherCAT master or other EtherCAT masters
Example of an EtherCAT slave information file (ESI file in XML format) included
esd EtherCAT slave API library and sample code for a quick introduction to application development are included in the scope of deliveryBus master support
The FPGA supports bus master DMA to relieve the CPU of copying the process image output data to the host memory. This function is used by the esd EtherCAT slave stack.
Customization on request -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-PCIe / 402
PCI Express® board with up to 4 CAN or CAN FD interfaces
Single Lane PCIe board with Altera FPGA for up to 4x CAN (FD)
CAN bit rates from 10 kbit / s up to 1 Mbit / s
PCIe® interface according to PCI Express specification R1.0a
MSI (Message Signaled Interrupts) support
CAN termination can be activated on-board
Comprehensive operating system support and extended CAN diagnostics
Software drivers and support for higher protocols for Windows®, Linux®, VxWorks®, QNX®, RTX, RTX64 and other operating systems -
CAN Interfaces, EtherCAT, Gateways and Bridges, Industrial Instruments, Test & Measurement
Model CAN-PCI / 400
2 or 4 channel PCI-CAN interface card (Layer 2, CANopen®, J1939 or ARINC825)
PCI plug-in card for up to 4x CAN
2x or 4x high-speed CAN interfaces according to ISO 11898-2
PCI interface according to PCI Local Bus Specification 2.2
esd Advanced CAN Core (esdACC) technologyBus mastering and local data management via FPGA
Software drivers for Windows® and Linux® included free of charge in the scope of delivery
Real-time operating systems and higher-layer protocols CANopen, J1939 and ARINC825
Software drivers for Windows, Linux, VxWorks®, QNX®, RTX, On Time RTOS-32 and other operating systems
CANopen, J1939 and ARINC825 protocol libraries available
Extended CAN diagnostics
Extended diagnostic functions
Supports CAN error simulation, e.g. CAN error injection
High resolution hardware timestamp
Powerful interface for PCs -
Battery Analyzers, Battery Testers and Chargers, Test & Measurement
IT5100 Battery Tester
IT5100 series is a series of battery internal resistance testers with high precision, high resolution and high speed. IT5100 adopts AC 4-terminal sensing, that means the tester can test internal resistance and voltage simultaneously with high precision. Resistance resolution is down to 0.1 μΩ, voltage resolution is 10 μV.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
Model IT8600 AC Electronic Load
IT8600 is ITECH latest series of AC/DC electronic loads with power range 0~14.4 kVA and adjustable frequency 45 Hz ~ 450 Hz. The unique oscilloscope waveform display function of IT8600’s can display input voltage & current as waveform.
-
AC and DC Electronic Loads, Power Sources & Measurement, Test & Measurement
Model IT-M3300 Regenerative DC Electronic Load
IT-M3300 regenerative DC electronic load can not only simulate various load characteristics, but also can feed back electrical energy to the local grid instead of heat. With high power density design, it can provide up to 800W power absorption with tiny body of only 1U half-rack.
-
AC Power Sources, Power Sources & Measurement, Test & Measurement
Model IT7900 Regenerative Grid Simulator
The IT7900 series is a programmable, four-quadrant grid simulator. It is also a four-quadrant power amplifier, which can be used to test various grid-connected equipment. For example, PCS, energy storage system, microgrid, BOBC (V2X), PHiL, etc.
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
Model IT-M3200 High Precision Programmable DC Power Supply
IT-M3200 high precision programmable DC power supply adopts a mixed modes design, which not only takes into account high power and low ripple output, but also has dynamic load response
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
IT6000B Regenerative Power System
ITECH launches a new incorporated product–IT6000B series. IT6000B integrates bidirectional power supply and regenerative electronic load into one 3U unit. It is also a very powerful one.
IT6000B offers standard two-quadrants functionality. IT6000B provides 7 voltage ranges, up to 2250V, supports master-slave parallel with even current distribution up to 1152kW.
-
EXTENDER, Multimedia, USB, USB Extenders
KD-XUSB2
USB 2.0 over CAT maximum 50M Extender, 2×1 USB A to B HUB, any CAT5e/6 cable length up to 50m, RJ45 interface for CAT5e/6, Support Video, Audio, KVM and generic USB connectivity
-
KD-X100MRx
4K/18G HDBaseT Rx (100m) with USB, LAN, ARC, L/R Audio In, L/R Audio Output De-Embed, IR, RS-232 (Receiver Only)
-
Live Streaming Solution, Multimedia
500786
MUXSTREAM SINGLE-CAMERA LIVE STREAMING SOLUTION 30X ZOOM, POE
-
-
AV Control Systems, AV OVER IP, Multimedia
NMX-WP-N2410 Windowing Processor
N2400 Series 4K60 4:4:4 Windowing Processor, 4×1
-
AV Control Systems, AV OVER IP, Multimedia
NMX-ENC-N2412A Encoder
JPEG 2000 4K60 4:4:4 & HDR Video Over IP Encoder, Stand Alone with POE+, KVM, & AES-67
-
AV Control Systems, AV OVER IP, Multimedia
NMX-ENC-N2315-WP Wallplate Encoder
N2300 Series 4K UHD Video Over IP Decor Style Wallplate Encoder with KVM, PoE
-
AV Control Systems, AV OVER IP, Multimedia
NMX-ENC-N2312 Encoder
N2300 Series 4K UHD Video over IP Stand Alone Encoder with KVM, PoE
-
AV Control Systems, AV OVER IP, Multimedia
NMX-DEC-N2422A Decoder
JPEG 2000 4K60 4:4:4 & HDR Video Over IP Decoder, Stand Alone with POE+, KVM, & AES-67
-
AV Control Systems, AV OVER IP, Multimedia
NMX-DEC-N2322 Decoder
N2300 Series 4K UHD Video over IP Stand Alone Decoder with KVM, PoE
-
-
-
-
-
-
-
AV Control Systems, Multimedia, Touch Panel & Keypads
MKP-108
8-Button Massio™ Keypad with Knob (US, UK, EU)
-
-
AV Control Systems, Multimedia, Touch Panel & Keypads
MD-1002
10.1” Modero G5 Wall Mount Touch Panel
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Multimedia, Presentation Switchers
DX-TX-4K60
The DXLink 4K60 HDMI Transmitter Module is ideal for extending 4K60 4:4:4 video in any situation where the highest video quality is required or when a simple installation is desired:
- Colleges and universities that transmit audio and video within or between classrooms for collaborative or distributed learning.
- Corporations that distribute audio and video within meeting spaces.
- Healthcare facilities distributing high-resolution video within training rooms, simulation rooms, or labs.
-
Multimedia, Presentation Switchers
DVX-3266-4K
8×4+2 4K60 4:4:4 All-In-One Presentation Switcher (4 HDMI Inputs, 4 DXLink-4K60 Inputs)
-
Multimedia, Presentation Switchers
DVX-2265-4K
6×2+1 4K60 4:4:4 All-In-One Presentation Switcher (4 HDMI Inputs, 2 DXLink-4K60 Inputs)
-
General Laboratory Instruments, Signal Generators, Function and Arbitrary, Test & Measurement
TOE 7741
TOELLNER Model TOE 7741 Function Generator
- Frequency range 1 mHz to 100 kHz
- High output power > 63 W into 8 Ohm
- Max. output amplitude 45 Vpp
- Output with feedback voltage protection
- Frequency counter up to 30 MHz
-
General Laboratory Instruments, Signal Generators, Function and Arbitrary, Test & Measurement
TOE 7761
TOELLNER Model TOE 7761 Arbitrary Function Generator
- 1 μHz to 40 MHz sine and square waveforms
- Output amplitude up to 20 Vss
- 80 MS/s sampling rate with arbitrary waveforms with 14 bit resolution and up to 1 000 000 sampling points
- Flash memory for 1 000 000 sampling points
- Many standard waveforms assist in creating arbitrary waveforms
- Various modulation and sweep options
- 50 instrument configurations can be stored
- Remote control via USB-1), GPIB- and RS-232 interface
-
Amplifier Wideband, General Laboratory Instruments, Test & Measurement
TOE 7607
TOELLNER Model TOE 7607 Broadband Amplifier
- High output voltage of up to 40 Vpp into 50 Ohm
- Wide frequency range from DC to 5 MHz
- Gain of up to 26 dB
- Small distortion factor
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
TOE 8800
TOELLNER Series TOE 8800 Arbitrary Power Supplies from 160 W to 5200 W
Single-Output and Dual-Output Power Supplies up to 400 W
- Generates any voltage and current characteristics
- Imports real-time signals from digital storage oscilloscopes or data recording systems
- Very high rise and fall rates of the output voltage: approx. 2 V/μs
- Brief load currents up to 1000 A
- User-friendly software
- GPIB and analog interfaces included as standard
- Vehicle electrics ripple: AC superimposition 4 Vpp
- 20 Hz to 70 kHz (TOE 8815 to TOE 8865)
- 20 Hz bis 50 kHz (TOE 8865 to TOE 88165)
- Internal sink function Brief load sink: 1000 W to 16000 W, depends on model
- Brief load current: 3 x Irated for approx. 10 ms (max. 1000 A)
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
TOE 8950
TOELLNER Models TOE 8951 / TOE 8952
Single-Output and Dual-Output Power Supplies up to 400 W
- Automatic setting to the existing line voltage: 115 V or 230 V, 47 to 63 Hz
- Autoranging
- RS 232 and analog interfaces included as standard
- USB, LAN, and GPIB interfaces optional
- Outputs at front and rear as standard
- On/off switching of the outputsge
- ½ 19“ weight, 2 HU design parallel installation possible
- Sensing
- Free LabView™ driver
- Can be used as constant voltage, constant current and constant power source (CV/CC/CP)
-
DC Power Supplies, Power Sources & Measurement, Test & Measurement
TOE 8730
TOELLNER Series TOE 8730 Multichannel DC Power Supplies 150 W
- Dual-output, triple-output and quintuple-output power supplies
- Extremely low residual ripple < 50 μV
- Electrically decoupled outputs
- Precise digital displays
- Analog remote control
- Resolution up to 1 mA
-
Radio Frequency & Microwave, RF & Microwave Spectrum and Vector Analyzers, Test & Measurement
Saluki S3502
Saluki S3502 series spectrum analyzer is adopted with the compact portable box structure, which has advantages of small size, light weight, low power consumption and convenient carrying. The S3502 series spectrum analyzer series currently consists of four types of products.
-
Radio Frequency & Microwave, RF & Microwave Spectrum and Vector Analyzers, Test & Measurement
Saluki S3302
Saluki S3302 series handheld/ portable spectrum analyzer is a high frequency handheld instrument. It provides multi-functions to fullfill different requirements from users. S3302 handheld spectrum analyzer has a compact design, very suitable for on-site measurement. S3302 series handheld/ portable spectrum analyzer can be applied to the signal and equipment test in aerospace, microwave and satellite communications, wireless communications, radar surveillance, electronic warfare and electronic surveillance, precision-guided and other industries.
-
POWER RF Meter, Radio Frequency & Microwave, Test & Measurement
Saluki S2438
S2438 series microwave power meter is composed of a host of microwave power meter and a series of microwave power sensors. S2438 series have a wide frequency band, large dynamic power range, high precision, fast measurement and analysis, serialization of sensors.
-
Radio Frequency & Microwave, RF & Microwave Signal Generators, Test & Measurement
Saluki S1465
S1465 series microwave signal generators, with the frequency range of 100kHz – 67GHz, are provided with high purity spectrum and high output power. The single side band phase noise at 10GHz carrier and 10kHz frequency offset is -126dBc/Hz. The maximum output power reaches up to 1W at 20GHz carrier, and the dynamic output power range gets 150dB. All these specifications can meet the high-end requirements of electromagnetic signal tests.
-
Radio Frequency & Microwave, RF & Microwave Signal Generators, Test & Measurement
Saluki S1132
S1132 Series Multi-Standard Signal Generator (9kHz – 6GHz)
The Saluki S1132 Series RF Signal Generator provides a wide range of product choices for different functional requirements and application scenarios. Each type of product has outstanding features in its function to characterize the focus of its testing field.
-
Analog & Digital Audio Test, AUDIO ANALYZER, Test & Measurement
TS digital and analogue audio test set
Self contained touch screen version of the dScope Series III hardware.
-
Analog & Digital Audio Test, AUDIO ANALYZER, Test & Measurement
dScope Series III
The dScope Series III is a comprehensive and powerful measurement system for analogue and digital audio generation and analysis, including digital audio carrier parameters, acoustic transducers and Windows™ sound devices (WDM or ASIO).
-
Analog & Digital Audio Test, AUDIO ANALYZER, Test & Measurement
dScope M1
The dScope M1 interface provides the most comprehensive and lowest cost solution for audio electronics and transducer testing.
-
Power Sensor Calibration System, Radio Frequency & Microwave, Test & Measurement
TEGAM 1314 RF High Power Calibration System
TEGAM RF High Power Calibration System
Calibrate High Power RF Sensing devices up to 250 W with uncertainty less than 1%
Working standards like a TEGAM 2601A
Through devices like a Bird Wattmeter
High Power RF Power Sensors from Keysight, R&S, and Anritsu
60 Hz to 3000 MHz Frequency Range
National Lab Traceable through an AC Power Standard -
General Laboratory Instruments, Sensitive Measurements, Test & Measurement
TEGAM Model 1740
TEGAM Model 1740 High Speed Microohmmeter, including GPIB & RS-232
Basic Accuracy: 0.02%
Measurement Speed: 10 ms
Range: 20 mΩ to 20 MΩ
Resolution: 1 µΩ
Programmable reference currents
Kelvin Klips, Spade Lugs or Kelvin Probes available
Easy to operate and easy to integrate
1-year warranty on this Microohmmeter
Made in USA -
General Laboratory Instruments, LCR METERS, Test & Measurement
TEGAM Model 253 LCR
TEGAM Model 253 LCR Meter Auto-ranging LCR Meter, 1 kHz, Battery Powered
Basic Accuracy: 0.25%
Measurement Speed: 250 ms
Test Frequency: 1 kHz
Automatic L, C, R, G and D measurements
Auto Ranging
Shielded Kelvin Connections
Rechargeable Battery Power Pack
Rear Panel External Bias Terminals
Calibration Certificate Included
1-year warranty
Made in USA -
Data Acquisition Systems, General Laboratory Instruments
DATAQ DI-4718B
DATAQ DI-4718B Data Acquisition and Data Logger Products
Measures temperature, pressure, flow, current, voltage, and more using isolated 8B amplifiers. View the DI-8B amplifier selection guideLow-Cost, Portable, USB or Ethernet Data Logger
Eight DI-8B signal-conditioned analog inputs. Expandable with ChannelStretch™ (Unlock code required for each instrument)
Stand-alone data logger option allows in-the-field measurements to be saved to flash memory (unlock code required for each instrument to record all channels to flash memory)
Up to 16-bit analog to digital conversion
-
Data Acquisition Systems, General Laboratory Instruments
DATAQ Model DI-4108-U
DATAQ Model DI-4108-U
USB DAQ and Data Logger, 12 to 16-bit resolution, 160,000 S/s Throughput, Records to USB flash drive
Includes a DI-4108 instrument, a 6-foot USB cable, a screwdriver for signal connections, and a USB flash drive with WinDaq/Lite software (downloadable at run.dataq.com) and an NIST-traceable calibration certificate (.pdf)Provided with WinDaq/Lite Software, which records up to four channels at any sampling rate. WinDaq/Unlock code required per device for data synchronization in WinDaq.
Stand-alone capability to USB thumb drive (Unlock Code required to record all channels to USB thumb drive – See Accessories)
Up to 160,000 Hz Sample Throughput Rate using WinDaq Acquisition software
Up to 160,000 Hz Sample Throughput Rate in stand-alone mode using high speed microSD card
12 to 16-bit analog-to-digital resolution (Calculate Resolution)
Programmable ranges: ±200, ±500 mV, ±1, ±2, ±5, ±10 V full scale
Eight armored analog differential inputs*
Up to 120 V rms without damage
-
Data Acquisition Systems, General Laboratory Instruments
DATAQ Model DI-808
DATAQ Model DI-808
Eight-channel Web-based Voltage, Thermocouple, and Pulse Data Logger
Includes a DI-808 instrument, a screwdriver for signal connections, a power supply, and an NIST-traceable calibration certificateNo software to install
Intelligent data logger with built-in web server works with with any device using a modern web browser
Stores data locally to internal flash memory or a USB thumb drive and/or remotely to any accessible server or email address
Allows remote real time display and configuration
Eight differential and isolated analog input channels programmable as voltage or thermocouple per channel measuring ±10mV, ±25mV, ±50mV, ±100mV, ±250mV, ±500mV, ±1V, ±2.5V, ±5V, ±10V, ±25V, or ±50V; or Thermocouple types J, K, T, B, R, S, E, or N
-
Semiconductor Characterization Equipment
Probing Accessories
Wentworth’s complete range of wafer probing accessories and options is designed to complement and enhance the capabilities and performance of its wafer probe stations. A global support team offers expert capability to design and develop solutions, to help you create ideal conditions for accurate, reliable and repeatable test results.
-
Semiconductor Characterization Equipment
Probe Cards
With specialist probe card facilities based in Europe and North America, Wentworth builds a wide range of standard and custom cantilever probe cards based on epoxy and blade technologies.
Its epoxy probe cards can accommodate high pin counts and benefit from competitive pricing and quick turn-around times. The company also has the expertise to build blade probe cards and offer a wide range of parts for their repair. All probe cards are supported by a fast maintenance and repair service.
-
Semiconductor Characterization Equipment
Production Wafer Probers
Wentworth’s range of production wafer probers offers rapid probing with a choice of semi-automatic, fully automatic and double-sided wafer probing platforms. They are ideally suited for characterization of wafer sizes from 2” to 12″ (up to 300 mm), for full or partial wafers.
All Wentworth’s production wafer probers utilize the Pegasus™ controller architecture which provides a robust and reliable production platform. All stages are controlled by Pegasus™ consisting of the drive electronics, joystick, keypad and optional Windows user interface. Interfacing is easy with TTL, GPIB (IEEE488.2) and RS232 ports located on the back panel.
Boasting a full range of accessories including manipulators, enclosures, antivibration tables, prober control software, chucks, optics and lasers means that each prober can be fully customized for your specific application.
-
Semiconductor Characterization Equipment
Analytical Wafer Probers
Wentworth offers a range of high precision analytical wafer probe stations including semi-automatic and manual probers for wafer sizes up to 300 mm to suit your budget. Experienced teams of consultants and global representatives can configure a full turnkey solution to suit your specific needs.
Specifically designed for failure analysis, device characterization and other analytical testing, all probe stations benefit from a full range of prober accessories including manipulators, enclosures, antivibration tables, prober control software, chucks, lasers and optics. This means you can upgrade your wafer probe station at any time to suit future probing goals.
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
X100MRX
4K/18G HDBT Rx (100m) with USB, LAN, ARC, L/R Audio In, L/R Audio Output De-Embed, IR, RS-232 (Receiver Only) – Shipping Q3 2019
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
X40MRx
4K/18G HDBT Rx (40m) with L/R Audio De-Embed, IR, RS-232 (Receiver Only)
-
EXTENDER, Multimedia, Pro av digital system, USB
500072
The USB 2.0 4-Port Extender Kit enables USB 2.0 connectivity over Cat5e/6 at data rates up to 480Mbps & extends true USB up to 328ft / 100m over single Cat5e/6 cable.
This USB 2.0 4-Port Extender Kit is true plug and play, it requires no additional software drivers, and is compatible with all major operating systems.
The unit supports a wide variety of USB extension applications including security, industrial control, digital signage, scientific data acquisition and other implementations of USB standards.
-
EXTENDER, Multimedia, Pro av digital system, USB
500457
This HDMI extender 4K with USB allows one HDMI 1.4 and one USB 2.0 channel to be transmitted up to 330ft (100m) at all resolutions up to 1920×1200 @ 60Hz via one (1) Cat 5e/6 cable in a point-to-point configuration. The receiving side includes a 4-port USB 2.0 hub, supporting KVM applications. Bi-directional IR transmission is supported.
Typical KVM Applications:
- Commercial and residential AV systems
- Classroom projector system
- Boardroom systems
- Collaborative PC systems
- Medical information systems
-
-
EXTENDER, HDMI, Multimedia, Pro av digital system
500462
The HDMI Optical Isolator (500462) allows HDMI equipment to be completely isolated and connected up to 984ft (300m), while allowing a unidirectional communication (with no return signaling) via one (1) LC 50/125 μm OM3 multimode fiber cable in a point-to-point configuration at 1080p resolution.
The HDMI Optical Isolator establishes a high separation between the source computer and the display devices preventing any potential leakage between the source and the peripheral equipment; removing the vulnerability of shared display equipment to cyber-attacks.
The kit comes with one (1) Transmitter, one (1) Receiver and two (2) power supply.
-
EXTENDER, HDMI, Multimedia, Pro av digital system
500459-100
The HDMI/RS232 100m Extender Kit, HDBT, 4K/60 allows HDMI equipment to be connected up to 230ft (70m) at 4K/60 (4:4:4) resolution, or 330ft (100m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. The unit is HDCP 2.2 compliant and supports HDR, as well as RS232 and bidirectional IR pass through transmission for end device remote control. This HDMI extender 4K supports PoC, allowing the transmitter to power the receiver, or the receiver to power the transmitter. The HDMI extender 4K kit includes one (1) transmitter, one (1) receiver, one (1) IR Emitter, one (1) IR sensor and one (1) power supply.
-
EXTENDER, HDMI, Multimedia, Pro av digital system
500451-POE
This HDMI extender 4K allows HDMI equipment to be connected up to 131ft (40m) at 4K/30 (4:4:4) or 4K/60 (4:2:0) resolutions, or 230 ft (70 m) at resolutions up to 1080p via one (1) Cat 5e/6 unshielded twisted pair cable in a point-to-point configuration. This HDMI extender 4K kit comes with one (1) transmitter, one (1) receiver, one (1) IR Emitter, and one (1) IR sensor.
-
EXTENDER, HDMI, Multimedia, Pro av digital system
500404
The HDMI / Bi-IR Extender Kit allows HDMI equipment to be connected via one Cat 5e/6 unshielded twisted pair cables in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control applications. Four (4) mounting Ear are also provided for wall-mount applications
-
KVM OVER IP, Multimedia, Pro av digital system
500770
The USB KVM Extender over IP PoE allows HDMI & USB equipment to be connected up to 330ft (100m) over an Ethernet LAN, supporting 1920×1200 and 1080p resolution @ 60Hz via Cat5e/6 cable in multiple point-to-point and point-to-multipoint configurations. The Transmitter (500770-TX) and Receiver (500770-RX) support PoE (PD) if used with a PoE (PSE) Ethernet Switch.
The Transmitter terminates to a computer server/workstation via an HDMI & USB port, The Receiver terminates to an HDMI display and up to 4 USB devices such as a keyboard, mouse, printer, drawing pad, storage device, camera, etc., via a 4 port USB hub. A single Receiver can be switched via hotkey sequences to any Transmitter on the network, allowing a single operator to manage numerous servers/workstations, in a distributed KVM application.
-
AV OVER IP, Multimedia, Pro av digital system
500762
The HDMI over IP H.264/H.265 PoE Extender Transmitter and Receiver combination allows HDMI source and display equipment to be extended locally up to 330ft (100m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, and supports Video Wall and Multiview capabilities in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over WiFi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60Hz to be displayed on a 4K monitor. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60Hz. These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
-
AV OVER IP, Multimedia, Pro av digital system
500759
Finally get the 4K video wall display you have always wanted with this HDMI 4K over IP solution which allows HDMI equipment supporting up to 4K @ 30Hz or 1080p at 60Hz resolution to be connected and extended to create a video wall of user-configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one Receiver for each display in the array. Transmitter (500759-TX) and Receiver (500759-RX) can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch. The Transmitters and Receivers support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch. The IR Emitter and IR Sensor, if required, may be purchased separately for IR based remote control applications. Look no further for video over IP solutions.
The MuxLab Pro Digital Network Controller (500811) is available to simplify configuration and control and allows for third-party smartphone and tablet management.
-
AV OVER IP, Multimedia, Pro av digital system
500754
The HDMI over IP PoE Extender allows HDMI equipment to be connected to create a Video Wall of a user configurable size (X by Y) supporting 100’s of screens, depending on network bandwidth, utilizing one receiver for each display in the array.
The transmitter unit is connected using a LAN switch (PoE or non-PoE), with maximum distances of 330ft (100m) of Cat5e/6 cable between equipment.
Set-up and configuration of the video wall function is carried out using the MuxLab ProDigital Network Controller (500811) – sold separately.
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
UPS52U
4K/18G USB/Universal Presentation Switcher with 5 Inputs (HDBT, 2x HDMI, DP, USB-C), 2 Mirrored Outputs (HDBT, HDMI), LAN, ARC, Audio De-Embed, IR, RS-232, IP Control, CEC Manager™. Includes Rx. – Shipping Q3 2019
Included:
X100MRX
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
PS42
4K/18G Presentation Switcher with 4 Inputs (HDBT, 3x HDMI), 2 Mirrored Outputs (HDBT, HDMI), Audio De-Embed, IR, RS-232, IP, CEC Manager™. Includes Rx. – Shipping Q3 2019
Included:
X40MRX
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
MLV4x2PRO
4×2 4K POH/HDBaseT/HDMI/VGA Multi-View Seamless Presentation Matrix Switcher. (Includes 1 Rx Extender)
Included:
X222PO
-
Multimedia, PRESENTATION SWITCH, Pro av digital system
500435
The 5×1 HDMI / HDBT Presentation switch is a compact scaler switcher with 5 video inputs (3 HDMI, 2 VGA) and 6 audio inputs (3 HDMI audio & 2 VGA with audio switched following the video; 1 MIC audio input). The VGA input supports VGA, Component Video (YPbPr) and Composite Video.
The 5×1 HDMI / HDBT Presentation switch scales & switches any video signal to HDMI output and HDBaseT output for a transmission over up to 70 m of Cat5e/6 with PoC support.
With 1 IR Sensor, 5 IR Emitters and 1 RS232 port, bidirectional IR & RS232 signals can be transmitted simultaneously between the 5×1 HDMI / HDBT Presentation switch and the HDMI Extender PoC/PoE Receiver.
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-LZ-D
2 Channel DSP-Enabled Amplifier
2 x 100W @ 4/8 Ohms
Dante™ Network EnabledThe DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- 2 Dante™ input channels
- Remote Volume Control
- Made in the USA
-
MC2, Multimedia, Pro Audio solutions
Delta 40DSP
Combining new technology power amplification with the highest definition XTA DSP, the Delta Series offers performance and convenience at a whole new level.
Powerful processing features, such as FIR filtering and Dante networking, work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single Delta DSP amplifier can control a stereo 4-way system with no external processing.
Configure and tune using a fast, powerful combination of Audio Core (XTA’s fast efficient control software platform) and Delta Direct, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored, wirelessly. USB, direct Ethernet and RS485 control options plus configurable GPIO offer unparalleled flexibility.
All MC² Audio products are covered by a 5 year warranty.
-
MC2, Multimedia, Pro Audio solutions
DELTA 20
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
All MC² Audio products are covered by a 5 year warranty.
-
Multimedia, Pro Audio solutions, stewartaudio
MC850-LZ-D
8 Channel Dante™ / AES67 Amplifier
50W x 8 @ 4/8 Ohms
Dante™ Network EnabledThe MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.
- 8 independent Dante™ inputs
- Primary and Secondary Dante™ ports (redundant or switched)
- Ethernet port for control and reporting
- RS-232 control
- Power sharing up to 125W per channel
- Compact 1RU enclosure
- Made in USA
-
Multimedia, Pro Audio solutions, stewartaudio
MC850-CV-D
8 Channel Dante™ / AES67 Amplifier
50W x 8 @ 70V/100V
Dante™ Network EnabledThe MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.
- 8 independent Dante™ inputs
- Primary and Secondary Dante™ ports (redundant or switched)
- Ethernet port for control and reporting
- RS-232 control
- Power sharing up to 100W per channel
- Compact 1RU enclosure
- Made in USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-LZ
2 Channel DSP-Enabled Amplifier
2 x 100W @ 4/8 OhmsThe DSP100-2-LZ is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- Not Dante™ Networked (See DSP100-2-LZ-D)
- Remote Volume Control
- Made in the USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-CV-D
2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100V
Dante™ Network EnabledThe DSP100-2-CV-D is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-CV-D supports Dante™ audio.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- 2 Dante™ input channels
- Remote Volume Control
- Made in the USA
-
Multimedia, Pro Audio solutions, stewartaudio
DSP100-2-CV
2 Channel DSP-Enabled Amplifier
2 x 100W @ 70V/100VThe DSP100-2-CV is an affordable, 2 channel, 70V/100V, 1/2 rack amplifier delivering 100W per channel with built in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications.
- Onboard full featured DSP
- Configurable via USB port
- Convection cooled, 1/2 rack enclosure
- 2 balanced + 2 RCA analog line/mic inputs
- Not Dante™ Networked (See DSP100-2-CV-D)
- Remote Volume Control
- Made in the USA
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
YOKOGAWA WT5000
YOKOGAWA Model WT5000 Precision Power Analyzer
The WT5000 is the Next Generation in Precision of Yokogawa’s Power Analyzers product line. It is a versatile platform that delivers extraordinary precision and exceptional performance for the most demanding applications. Equipped with 7 user swappable and reconfigurable input elements plus 4 motor channels, the WT5000 is an ideal instrument for both electrical and mechanical power and efficiency measurements. Its highly responsive touchscreen, intuitive menu operations, and out of the box software solution make the WT5000 an ideal instrument for your testing needs.
-
OSCILLOSCOPES, Osciloscopes, Test & Measurement
YOKOGAWA DLM3000
YOKOGAWA Model DLM3000 Mixed Signal Oscilloscopes
The DLM3000 builds on Yokogawa’s oscilloscope legacy with new features focusing on quality, flexibility, and usability to increase our users’ productivity and meet the advanced needs of today’s mechatronics designs. Integrating the latest in touchscreen operation, solid-state storage, and high speed signal processing, the DLM3000 enhances productivity by providing clean signals, extensive processing, and ease of operation. The DLM3000 touchscreen oscilloscope provides productivity at your fingertips.
-
DSP 4×4
DSP4x4 Features: • 4 channels of DSP processing • Configurable via USB port • RS-232 connection for live changes • 1/3 rack package & convection cooled • Made in the USA • Matrix Mixer • 9 bands of parametric filters per channel • Priority signal ducker • 100ms of delay per channel
Applications: • Hospitality Installations • Board Rooms • Classrooms • Conference Rooms • House of Worship • Remote Locations • Distributed or centralized venues • Room combining -
CVA 50 MX 1
CVA50MX-1 CVA50PMX-1 25W x 2 @ 4/8 Ohms 50W x 1 @ 25V/70V or 25V/100V Features: • Sub Compact 1/3 rack package • 4 input mono mixer amplifier
• Music and fire alarm muting • Clean full–range dynamic power • Signal Detect trigger for sleep & wake up • Multiple mounting options • External inline power supply • Made in the USA
Applications: • Boardrooms & classrooms • AV projection systems • Lecterns and Podiums • Plenum applications, UL 2043 rated • Pole mounting option • Fixed installations with mixer amplifiers located in listening environment • Applications where traditional mixer amplifiers won’t fit • Behind flat screen televisions -
CVA 50 – 1 net
Mono Dante™
Subcompact Amplifier – 50W x 1 @ 70V/100VMono constant voltage networked amplifier in a subcompact, 1/3 rack form factor.
- Mono networked endpoint
- External inline power supply
- Line out
-
AV25-2
AV25-2 RS232
35W x 2 @ 4 Ohms 25W x 2 @ 8 Ohms
Features: • Sub Compact 1/4 rack package • Two channel amplifier optimized to drive 4 Ohm and 8 Ohm loads
• RS232 control over volume and muting • Set discrete values • Multiple mounting options • External inline power supply • Made in the USA
Applications: • Boardrooms & classrooms • Hospitality • Lecterns & podiums • Pole mounting option • Fixed installations with mixer amplifiers located in listening environment • Applications where traditional amplifiers won’t fit • Behind flat screen televisions -
Radius
Radius
- A Powerful General Purpose DSP / A Version with AEC
- 128 Channel (64×64) Redundant Dante
- On-board Ethernet and Dante Network Switches
- 1 I/O Expansion Card Slot
- 12 Analog Inputs / 8 Analog Outputs
-
Key digital Pro AV Digital Systems, Multimedia
KD-CX800
Control Interface with IR and RS-232 over IP Routing
KD-CX800 is a control over IP device with three multi-function control ports supporting
bi-directional RS-232, IR out (emitter), IR in (sensor or hardwire), voltage trigger, or
voltage sensor. -
AC and DC Electronic Loads, Power Sources & Measurement
Series 2380
Series 2380 DC Electronic Load
Series 2380 programmable DC Electronic Loads are single output, standalone loads with 200W, 250W and 750W models. Multiple operation modes with up to 25 kHz of dynamic cycling, superior voltage/current resolution and readback accuracy together with multiple interface choices make the Series 2380 ideal for testing a power source in your bench.
-
CNT-90XL
The Pendulum CNT-90XL Microwave Counter/Analyzer is an excellent tool for measurement, analysis and calibration of Microwave Frequency, Power, and Pulsed RF time parameters like pulse width and PRI. Whether in test systems, on the R&D bench, in the calibration lab or out in the field, the high-resolution and ultra-fast CNT-90XL is the state-of-the-art Microwave Counter/Analyzer. The NEW option for pulsed RF makes CNT-90XL ideal for radar test and calibration. The CNT-90XL offers a unique ease-of-use with graphical display and improved control over measurement at an affordable price.
-
CNT-91 & CNT-91R
The Pendulum CNT-91 zero-dead-time counter features continuous data streaming of measurements over GPIB/USB during, not after, measuring; creating a dynamic measurement/analysis system, a first in the counter industry! The CNT-91 is a unique frequency analyzer, outperforming any universal timer/counter.
-
Reference Time & Frequency, Timers/Counters/Analyzers
SecureSync Enterprise
SecureSync® combines Spectracom’s precision GPS master clock technology and secure network-centric approach with a compact modular hardware design in a 1RU chassis to result in a powerful, scalable and flexible NTP appliance.Supporting a wide variety of network synchronization and management protocols, the base model comes with a built-in 10/100 base-T Ethernet port for network management and high-performance NTP which can serve more than 7,500 NTP requests per second. It includes all the latest functions of NTPv4. It can be deployed in combination with other stratum-1 NTP server(s), can be used in a stratum-2 configuration, and can be expanded through option modules
-
Reference Time & Frequency, Timers/Counters/Analyzers
EC20S
Epsilon Clocks provide accurate and stable time and frequency signals for your high-performance synchronization application. The unit’s optimized architecture is well-suited to transmitter synchronization of digital broadcast signals (DVB-T/T2, T-DMB, DAB or DRM) in Single Frequency Networks (SFN) modes: the high port density allows to synchronize many emitters simultaneously on the same site
-
Distribution Time & Frequency, Timers/Counters/Analyzers
SecureSync
SecureSync® combines Spectracom’s precision master clock technology and secure network-centric approach with a compact modular hardware design to bring you a powerful time & frequency reference system at the lowest cost of ownership. Military and commercial applications alike will benefit from its extreme reliability, security, and flexibility for synchronizing critical operations.
-
Distribution Time & Frequency, Timers/Counters/Analyzers
9489
Spectracom’s NetClock Model 9489 delivers worldwide, split-second timing for an NTP network with the highest security, reliability, and ease of management. It is designed for applications requiring an affordable but state-of-the-art GPS NTP server.
For today’s network and computer systems that require time-sensitive data for such tasks as logging events, records management, network optimization and troubleshooting, and synchronizing operations, we offer our high performance NTP server technology in this specific NetClock model, and as a direct replacement for previous generation models: 8189, 9189, 9289, and 9389. -
Distribution Time & Frequency, Timers/Counters/Analyzers
9483
The Model 9483 NENA-compliant GPS master clock continues Spectracom’s legacy of bringing essential time synchronization to public safety answering points (PSAPs) and other emergency and command and control systems.
More than 4,500 PSAPs across North America trust a NetClock master clock / time server to validate 911 event records, improve response times and facilitate interoperability with Legally Traceable Time®. The latest NetClock are easier than ever to install and manage while maintaining strict compliance to the National Emergency Number Association’s (NENA) Master Clock Standard #04-002. Features support Next-Generation 911 initiatives and has been tested against NENA’s Security for Next Generation 9-1-1 Standard #075-001 -
Power Sensor Calibration System, Radio Frequency & Microwave
PM Series
TEGAM has condensed their experience with microwave calibration into one convenient and accurate automated system that operates from 6 kHz to 18, 26.5 or 50 GHz. One turnkey package includes the VNA, signal generator, microwave power standards, workstation, software and accessories required for immediate productivity. The system is configured with instruments from different manufacturers that have been tested and verified by TEGAM to produce an accurate and repeatable calibration. Onsite installation and training are included with each complete system for a fast and trouble free start up.
-
Frequency Standards, Precision Instrumentation
GPS-12R & GPS-12R/HS
The Pendulum GPS-12RG Portable Reference clock is an ultra-stable GLONASS and GPS-disciplined Rubidium reference, targeted for both laboratory and telecommunications applications. The built-in battery option enables transportation of lab accuracy to field applications. When locked to GLONASS and/or GPS, its near-Cesium performance makes the GPS-12RG an ideal calibrator for metrology and test systems.
-
Current Shunts, Precision Instrumentation
9230A
Guildline Instruments 9230A SERIES of precision DC current shunts / standards are true 4-terminal devices intended for the precise measurement of DC current. They are constructed using elements made from a Guildline proprietary metal alloy and are supported on an insulating base for mechanical stability
-
Bridges DC, Precision Instrumentation
6622A
The 6622A Series provides the best in measurement uncertainties for Direct Current Comparator (DCC) Resistance Bridges. Unique innovations in 6622A design and modularity means users no longer have to decide what Bridge satisfies current requirements as well as future requirements. Optional modules allow for normal, high ohms, and low ohms measurements without having to purchase multiple bridges as per competitive products.
-
Air Humidity & Temperature Sensors, Industrial Instruments
911A / 912A
The Model 911A is a single channel digital thermometer compatible with type K, J, T or E thermocouple probes to provide a wide range of temperature measurements, (-418 °F to 2502 °F) and boasts a 2000 hour battery life using three AA batteries. The 911A provides dependable and uninterrupted portable measurement capability without expensive batteries, AC adapters or chargers.
-
General Laboratory Instruments, Sensitive Measurements
1750
Recognized as the industry's fastest precision microohmmeter, the model 1750 has become the #1 choice in manufacturing environments. Fuse manufacturers use it for nondestructive tests where the unmatched precision increases the process yield to the point where the 1750 pays for itself in weeks. The vast majority of resistors less than 1 Ohm are tested and sorted to accuracy better than 0.1% by the 1750. Automotive suppliers use it to consistently meet stringent quality requirements of welds, bonds and electrical connection in sub-assemblies. Aircraft manufacturers employ the 1750 to measure wiring harnesses and RF shields for connection integrity. The capability of the 1750 enables the accurate real time measurement of electro-plating thickness and conductive coatings on housings and shields.
-
General Laboratory Instruments, Resistance Standards
9334A
The 9334A SERIES of DC Air Based Resistance Standards are designed for high accuracy resistance calibration in air.
-
Distribution Amplifiers, General Laboratory Instruments
SAS-17E & SAS-36E
SAS-E is a high performance, highly manageable and reliable solution for distributing time and frequency signals for satcom, digital TV or audio broadcast, microwave links, satellite ground stations applications.
The Epsilon™ Switch and Amplifier System (SAS-E) provides a cost effective way to extend distribution of time and frequency signals (pulse, low phase noise frequency signal, Time of Day), as a signal amplifier. Thanks to analog amplification, SAS-E adds very little phase noise to the input frequency and ensures high RF isolation. It is therefore suitable for reference frequency distribution towards transmitters, up-converters, micro-wave links. Pulse regeneration is transparent to pulse duration and period: SAS-E is therefore suitable for distribution of any pulse encoded signal like 1 pps, DCLS IRIG, etc
-
Amplifier Wideband, General Laboratory Instruments
2340/2350
The Model 2340 High Voltage Amplifier expands the amplitude range of any standard function, pulse or waveform generator to 400 Vp-p. There is also a special high impedance input option for DAC boards. The DC coupled design enables combined DC and AC wave forms for greatest flexibility in test applications. The response and gain are calibrated for a faithful reproduction of the test signal.
The output current is rated at 40 mA continuous with a 0.2 Ω output impedance. Each channel has an independent, buffered, voltage monitor output for applications that require a low-level representation of the output signal. The buffers produce a reduction of 200:1 for 50 Ω inputs and 100:1 for 1 MΩ and above inputs. A current limiting function senses the current in either direction providing maximum protection to the amplifier during operation.
-
DATA ACQUISITION, Data Acquisition Systems, General Laboratory Instruments, OSCILLOSCOPES, Osciloscopes, Test & Measurement
DL350
The DL350 ScopeCorder is a portable instrument featuring the deep measurement and recording capabilities you need in the lab in a compact instrument you can take into the field. A ScopeCorder combines the transient signal capturing capabilities of an oscilloscope with the long-term datalogging capabilities of a data recorder. For “quick and easy” troubleshooting or sophisticated mixed-signal datalogging, the DL350 is a portable, powerful, and useable engineering tool that makes complete measurements completely portable.
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
Microphone ES947/LED
ES947/LED
CARDIOID CONDENSER BOUNDARY MICROPHONE WITH LED
- Contractor-exclusive innovations for every acoustical challenge
- Safe haven from Radio Frequency Interference (RFI)
- Low-profile cardioid condenser boundary microphone
- Designed for clear, highly intelligible sound reinforcement, teleconference
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Available in black (ES947/LED) or white (ES947W/LED)
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
ES947
ES947
CARDIOID WIDE RANGE FIXED CHARGE CONDENSER BOUNDARY MICROPHONE
- Designed for surface-mount applications
- Cardioid polar pattern with 120º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Isolators provide mechanical dampening of mounting-surface vibration
- Operates on 9-52V phantom power only
- UniGuard® RFI-shielding technology
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
MICROPHONE ES945/LED
ES945/LED
OMNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE WITH LED
- Contractor-exclusive innovations for every acoustical challenge
- Safe haven from Radio Frequency Interference (RFI)
- Low-profile omnidirectional condenser boundary microphone
- Designed for clear, highly intelligible sound reinforcement, teleconference
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Disponible en deux coloris : blanc (ES945W/LED) ou noir (ES945/LED)
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
ES945
ES945
OMNIDIRECTIONAL FIXED CHARGE CONDENSER BOUNDARY MICROPHONE
- Designed for surface-mount applications
- Omnidirectional polar pattern with 360º acceptance angle
- Mounts unobtrusively in table-tops, ceilings and wall panels
- Isolators provide mechanical dampening of mounting-surface vibration
- Operates on 9-52V phantom power only
- UniGuard® RFI-shielding technology
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
ES935SC6
ES935SC6
CARDIOID CONDENSER GOOSENECK MICROPHONE WITH LIGHTING MUTE SWITCH
- Designed for professional recording and demanding sound pickup applications
- Mute switch in base lights to indicate operational status of the microphone
- Low-profile element provides uniform cardioid polar pattern
- Unobtrusive design with an overall length of only 197.3 mm
- Plugs into any standard XLRF-type connector
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
ES915SC
ES915SC
CARDIOID CONDENSER GOOSENECK MICROPHONE WITH MUTE SWITCH/LED
- Designed for professional recording and demanding sound pickup applications
- Low-profile element provides uniform cardioid polar pattern
- Plugs into any standard XLRF-type connector
- Included low-profile isolation mount attenuates noise, shock and vibration
-
Engeenred Sound, Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions
RIGID-PIPE MICROPHONE ES905CL
ES905CL
CARDIOID RIGID-PIPE CONDENSER MICROPHONE
- Designed for high-quality sound reinforcement and professional recording
- Low-profile element provides uniform cardioid polar pattern
- Rigid-pipe design with ball-in-socket base permits flexible positioning
- Sturdy metal base mounts to table, desk or podium with included hardware
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom power
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
ATND8677
ATND8677
MICROPHONE DESK STAND WITH DANTE™
- Connects directly to Dante network via Ethernet cable
- Integrated user switch controls talk/mute in Local mode
- Integrated user switch triggers Dante-enabled devices in Remote mode
- Powered by network PoE
- Scalable across Dante’s 512 bidirectional audio channels
- Touch-sensitive capacitive-type user switch
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
ATND971
ATND971
CARDIOID CONDENSER BOUNDARY MICROPHONE WITH DANTE™
- Bridges the gap between audio and IT
- Transmits audio and control data together over Audinate’s Dante™ network
- Perfect fit for boardrooms and other meeting spaces
- Supports up to 512 bidirectional audio channels
- Easy to install and operate
- Features UniGuard® RFI-shielding technology and UniSteep® low-cut filter
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO49QL
PRO49QL
CARDIOID CONDENSER QUICK-MOUNT GOOSENECK MICROPHONE, 418MM
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- Quiet, fixed-placement long-life gooseneck
- Plugs into any standard XLRF-type surface or cable connector
- Also available in a 13.07″ (332.0 mm) as PRO49Q
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO47TL
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- Quiet, fixed-placement, long-life gooseneck
- 3.0 m cable permanently attached between microphone and XLRM connector
- Requires 9V to 52V DC phantom power
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO45
PRO45
CARDIOID CONDENSER HANGING MICROPHONE, BLACK
- Hi-SPL handling is ideal for suspension over choirs and orchestras
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Flat, smooth frequency response
- 7.6 m cable permanently attached between microphone and XLRM connector
- Also available in white as PRO45W
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO44
PRO44
UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
- Very low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm
- Self-contained electronics eliminate need for external power modules
- Rugged design and construction
- 25′ (7.6 m) detachable cable (TA3F to XLRM-type)
- Dimensions 73mm x 90.5mm x 15mm
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, ProPoint
PRO42
PRO42
MINIATURE UNIDIRECTIONAL CONDENSER BOUNDARY MICROPHONE
- Very low-profile design for minimum visibility
- Wide-range condenser element with low-mass diaphragm
- Uniform polar pattern for maximum rejection of unwanted sounds
- Rugged design and construction
- 7.6 m cable permanently attached between microphone and XLRM connector
- Dimensions 36.6mm x 54.3mm x 15.5mm
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, UniPoint
U857Q
CARDIOID CONDENSER QUICK-MOUNT GOOSENECK MICROPHONE, 365MM
- Designed for high-quality sound reinforcement
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology
- UniSteep® filter
- Self-contained electronics eliminate need for external power module
- Accepts interchangeable elements
-
Installation Microphones, Multimedia, Pro audio microphones, UniPoint
U855QL
CARDIOID DYNAMIC GOOSENECK MICROPHONE, 448MM
- Designed for use as a high-quality talk-back, paging & dispatch microphone
- Extremely rugged all-metal construction for long-lasting performance
- Quick-mount design with 3-pin XLRM-type connector
- Low-profile element provides uniform cardioid polar pattern
- Rugged gooseneck permits quick positioning
- Frequency response tailored for excellent intelligibility
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, UniPoint
U853A
CARDIOID CONDENSER HANGING MICROPHONE
- Designed for suspension over choirs, instrumental groups and theater stages
- Superior off-axis rejection for maximum gain before feedback
- UniGuard® RFI-shielding technology offers outstanding rejection of RF
- UniSteep® filter provides a steep low-frequency attenuation
- Accepts interchangeable elements
- Operates on battery or phantom power
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, UniPoint
U851R
CARDIOID CONDENSER BOUNDARY MICROPHONE
- Ideal for sound reinforcement, professional recording and conferencing
- PivotPoint® rotating output connector
- Superior off-axis rejection for maximum gain before feedback
- Outstanding rejection of radio frequency interference (RFI)
- Small-diameter UniPoint capsule near boundary
- Available in two colors: black (U851R) and white (U851RW)
-
Installation Microphones, Multimedia, Pro audio microphones, Pro Audio solutions, UniPoint
U843R
THREE CHANNEL BOUNDARY CARDIOID CONDENSER MICROPHONE
- Each element can be powered and used individually or in any combination
- Designed for surface-mount applications such as highquality sound reinforce
- Ideal for a variety of video and audio conferencing application
- Small-diameter UniPoint capsule near boundary eliminates phase distortion
- Technology UniGuard™ offers outstanding rejection of RFI
- Low-profile design with low-reflectance finish for minimum visibility
-
Installation Microphones, Pro audio microphones, Pro Audio solutions, UniPoint
U841A
- Ideal for sound reinforcement, professional recording and conferencing
- Outstanding rejection of radio frequency interference (RFI)
- UniSteep® filter provides a steep low-frequency attenuation
- Small-diameter UniPoint® capsule near boundary eliminates phase distortion
- Heavy die-cast case and silicon foam bottom pad
- Operates on battery or phantom power
-
Data Acquisition Systems, General Laboratory Instruments
SIRIUS R8D rack display solution
8 to 32 analog inputs
-
DC Power Supplies, Power Sources & Measurement
IT6800A DC Power Supply
IT6800A series are programmable single channel output DC power supplies
-
DC Power Supplies, Power Sources & Measurement
IT6412 DC Power Supply
IT6412 DC Power Supply unique bipolar voltage/current output
-
HDMI / HDBaseT Matrices &Extenders, Multimedia, Pro AV Digital Systems
VGA/AUDIO TRANSMITTER UHD-4K-500455
HDMI – VGA/AUDIO WALL-PLATE TRANSMITTER, UHD-4K
-
HDMI / HDBaseT Matrices &Extenders, Multimedia, Pro AV Digital Systems
HDMI/RS232 EXTENDER POE-500454
HDMI/RS232 EXTENDER KIT, HDBT, UHD-4K + HDMI/RS232 EXTENDER KIT WITH POE, HDBT, UHD-4K
-
HDMI / HDBaseT Matrices &Extenders, Multimedia, Pro AV Digital Systems
HDMI EXTENDER KIT – 500451
HDMI EXTENDER KIT, HDBT, UHD-4K
-
HDMI / HDBaseT Matrices &Extenders, Multimedia, Pro AV Digital Systems
HDMI / BI-IR EXTENDER KIT-500404
HDMI 4K over IP PoE Extender Kit
-
HDMI / Over IP Extender Systems, Multimedia, Pro AV Digital Systems
HDMI over IP H.264 PoE-500757
HDMI over IP H.264 PoE Extender Kit
-
HDMI / Over IP Extender Systems, Multimedia, Pro AV Digital Systems
Video Wall over IP Extender-500754
Video Wall over IP Extender Kit with PoE
-
HDMI / Over IP Extender Systems, Multimedia, Pro AV Digital Systems
HDMI / RS232 over IP-500753
HDMI / RS232 OVER IP EXTENDER KIT WITH POE
-
ATE Systems, Data Acquisition Systems, PXIbus Instruments, Test & Measurement
PXI-9846D 4-CH, 40MS/S, 16-BIT PXI-H DIGITIZER MODULE
- 4-CH, 40MS/s, 16-bit digitizer
- 512 MB deep on-board memory for recording waveforms for extended periods
- Software selectable 50Ω or 1 MΩ input impedance
- ±0.2V and ±1V input ranges
- External clock support
- Extensive analog and digital triggering
- Fully auto-calibration
-
ATE Systems, Data Acquisition Systems, PXIbus Instruments, Test & Measurement
PXI-2204 64-CH, 3MS/S 12-BIT MULTI-FUNCTION PXI-H MODULE
- 64-CH single ended/32-CH differential, 12-bit scanning analog inputs
- Up to 3 MSa/s sampling rate
- Multiple programmable ranges from 0.05V (min) to 10V with unipolar or bipolar modes
- 2-CH, 12-bit multiplying analog outputs with waveform generation
- 24-CH TTL Digital I/O
- 2-CH 16-bit general purpose timer/counter
- Analog and digital triggering
- Auto-calibration
-
ATE Systems, Data Acquisition Systems, PXIbus Instruments, Test & Measurement
PXI-2010 4-CH, 2MS/S SIMULTANEOUS A/D MULTI-FUNCTION PXI-H MODULE
- 4-CH differential, 14-bit, 2 MS/s analog inputs
- Four programmable ranges 1.25V to 10V with unipolar or bipolar modes
- 2-CH, 12-bit multiplying analog outputs with waveform generation
- 24-CH TTL Digital I/O
- 2-CH 16-bit general purpose timer/counter
- Analog and digital triggering
- Auto-calibration
-
ATE Systems, Data Acquisition Systems, PXIbus Instruments, Test & Measurement
PXI-2005 4-CH, 500KS/S SIMULTANEOUS A/D MULTI-FUNCTION PXI-H MODULE
- 4-CH differential, 16-bit, 500 kS/s analog inputs
- Four programmable ranges 1.25V to 10V with unipolar or bipolar modes
- 2-CH, 12-bit multiplying analog outputs with waveform generation
- 24-CH TTL Digital I/O
- 2-CH 16-bit general purpose timer/counter
- Analog and digital triggering
- Auto-calibration
-
ATE Systems, Data Acquisition Systems, Physical Measurements, PXIbus Instruments, RPM and Speed, Sound and Vibration, Test & Measurement, Torque
PMX04 PORTABLE 4-SLOT 3U PXI EXPRESS ‘TABLET’ WITH INTEGRATED DISPLAY
- 4-slot PXI Express tablet test and computing system
- Hybrid mixed PXI/PXIe slot chassis
- Multipoint capacitive touch screen LCD
- Durable construction for industrial systems
- Integrated 14” 1366 x 768 LCD Display
- Internal Intel Core i7 Quad Core Processor, 1.7 Ghz
- QM67 PCH Chipset, equipped with 4GB DDR3 DRAM
- Internal 256GB HDD Drive standard with SATA 3.0 interface
- Wide range peripheral interface
-
ATE Systems, Data Acquisition Systems, Physical Measurements, PXIbus Instruments, RPM and Speed, Sound and Vibration, Test & Measurement, Torque
EMX-4380 625 KSA/S, 4 CH, 24-BIT SMART PXIE DSA INSTRUMENT, CHARGE, IEPE AND VOLTAGE
- First integrated data acquisition instrument to support IEPE, charge, and voltage inputs
- 625 kSa/s/channel, 24-Bit ADC, 4-Channel
- Flexible analog and user defined digital filter combinations
- True differential inputs with 25 V Isolation
- Exceptional noise immunity
- Highest quality instrumentation grade ADC’s outperform commonly used audio grade ADC’s
- Fully programmable excitation (2 mA to 20 mA)
- Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response
-
ATE Systems, Data Acquisition Systems, Physical Measurements, PXIbus Instruments, RPM and Speed, Sound and Vibration, Test & Measurement, Torque
EMX-4350 625 KSA/S, 4-CH, 24-BIT SMART PXIE DSA INSTRUMENT, IEPE AND VOLTAGE
- 625 kSa/s/channel, 24-Bit ADC, 4-Channel
- True Differential, IEPE or Voltage, AD/DC Inputs
- Flexible analog and user defined digital filter combinations
- Best-in-class noise immunity
- Highest quality instrumentation grade ADC’s outperform commonly used audio grade ADC’s
- Best-in-class -125 dB SFDR
- Unparalleled fully programmable excitation (2 mA to 20 mA)
- Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response
-
ATE Systems, PXIbus Instruments, Test & Measurement
EMX-4016 16 CHANNEL BREAKOUT BOX FOR USE WITH EMX-425X
- Designed to work with EMX-4250/EMX-4251
- 8 channel (EMX-4008) and 16 (EMX-4016) channel variants available
- LED Channel Health Indicator
- BNC Connections for signals
- External Trigger Connector
- External Calibration Input Connector
- Rack mountable
-
ATE Systems, Data Acquisition Systems, Physical Measurements, PXIbus Instruments, Sound and Vibration, Test & Measurement
EMX-4250 16-CHANNEL, 204.8 KSA/S SMART PXIE DSA DIGITIZER
- 204.8 kSa/s/channel, 24-Bit ADC’s, 16-Channel
- Differential inputs deliver superior common mode performance
- Flexible analog and user defined digital filter combinations
- -105 dB SFDR
- Seven auto-ranging input ranges from 100 mV to 10 V
- Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response
-
ATE Systems, Data Acquisition Systems, Physical Measurements, PXIbus Instruments, Sound and Vibration, Test & Measurement
EMX-4251 8-CHANNEL, 204.8 KSA/S SMART PXIE DSA DIGITIZER
- 204.8 kSa/s/channel, 24-Bit ADC’s, 8-Channel
- Differential inputs deliver superior common mode performance
- Flexible analog and user defined digital filter combinations
- -105 dB SFDR
- Seven auto-ranging input ranges from 100 mV to 10 V
- Deterministic channel-to-channel, card-to-card, and chassis-to-chassis phase response
-
ATE Systems, LXIbus Instruments, PXIbus Instruments, Test & Measurement
EMX-2401 INTEL CORE I5 2.4 GHZ, 8 GB RAM, 160 GB HARD DRIVE, PXIE EMBEDDED CONTROLLER
- Powerful computing power with Intel® Core™ i5-520E 2.4 GHz processor
- Dual Channel DDR3 SODIMM, Up to 8 GB 1066 MHz
- Up to 2 GB/s system throughput
- PXI Express Link Capability Four Links Configuration x4 or Two Links x8
- Integrated SATA hard drive, 160 GB 7200 RPM
- Integrated I/O enabling Hybrid test-systems: Dual Gigabit Ethernet ports, Four USB 2.0 ports, Micro-D GPIB connector, DVI-I video connector, ExpressCard/34 expansion slot, Trigger I/O for advanced PXI™ trigger functions
- Programmable watchdog timer
-
ATE Systems, LXIbus Instruments, Test & Measurement
EMX-2500 GIGABIT ETHERNET LXI CONTROLLER FOR EMX SERIES PXIE INSTRUMENTS
- Industry’s first gigabit Ethernet LXI Remote controller for PXI Express
- Up to 100 MB/s sustained throughput
- Allows remote access to VTI’s SentinelEX PXIe instruments from anywhere in the world on any internet enabled device
- Multi-chassis synchronization using precision IEEE-1588-2008 standard time source
- Easy to set up for distributed data acquisition systems
- Simplified instrument discovery and usage – just type in the IP address to connect to the instrument
- IVI drivers supporting wide variety of Application Development Environments and Operating Systems
- REST HTTP protocol for cloud support and advanced web applications
-
ATE Systems, LXIbus Instruments, PXIbus Instruments, Switching Systems, Test & Measurement
CMX34 INTEGRATED PXIE/LXI SUBSYSTEM WITH RECEIVER INTERFACE MECHANISM
- Achieve best performance with hybrid test system that combines exceptional data throughput of PXIe with increased board-space in an LXI mainframe optimized for signal switching.
- PXIe mainframe with high bandwidth PCIe Gen 2 backplane with 2 GB/s bandwidth per slot and 8 GB/s system bandwidth
- EX1200 LXI mainframe for signal switching and I/O where the real estate allows instrument-grade performance
- Fully integrated including cables and receiver modules, ready to drop into a test system
- Subsystems engineered to maximize signal integrity and delivered fully tested and verified to guarantee results
- Save time and money in sourcing, development and deployment
-
ATE Systems, LXIbus Instruments, PXIbus Instruments, Test & Measurement
CMX18 18-SLOT 3U PXI EXPRESS CHASSIS, UP TO 8 GB/S BANDWIDTH
- 18-slot PXI Express chassis with 1 system controller slot, 6 peripheral slots, 10 hybrid slots, and 1 timing slot
- High bandwidth PCIe Gen 2 backplane with 2 GB/s bandwidth per slot (4 GB/s on high-bandwidth slots) and 8 GB/s system bandwidth
- Rugged construction with extended temperature range
- True 4U chassis
- IEEE-1588 distributed instrument synchronization
- Built-in system-monitoring provides confidence in system operation and simplifies debugging
-
ATE Systems, LXIbus Instruments, PXIbus Instruments, Test & Measurement
CMX09 9-SLOT 3U PXIE HIGH PERFORMANCE RUGGED CHASSIS, UP TO 8 GB/S BANDWIDTH
- 9-slot PXI Express chassis with 1 system controller slot, 6 peripheral slots, 1 hybrid slot and 1 timing slot
- High bandwidth PCIe Gen 2 backplane with 2 GB/s slot bandwidth and 8 GB/s system bandwidth
- Combine with EMX-2500 LXI controller for Ethernet connectivity and distributability in the EMX09
- True 4U chassis
- Rugged construction with extended temperature range
- Smart switch display for health monitoring and control
- First PXI Multicomputing (PXImc) ready chassis
- Rack mount, custom front panels, and bolt-down option available
-
Battery Analyzers, Battery Simulator, Rechargeable Batteries, Test & Measurement
C8000 BATTERY TESTING SYSTEM
BY ALL IMAGINATION, THE CADEX C8000 MAY WELL BE THE MOST COMPLETE BATTERY TESTING SYSTEM AVAILABLE.
The Cadex C8000 delivers the versatility needed to ensure you get the right performance from the batteries used in your applications. The C8000 is a multi-purpose tool that allows you to optimize batteries at every stage of product life.
You can capture load signatures of power tools and laptops and then perform simulated battery runtime by replying the stored data. Add a thermal chamber,
external load bank and other accessories, and you begin realizing that the
Cadex C8000 stands in a class by itself at an affordable price.- Device Simulation helps you choose the right battery
- Life Cycle Testing helps you characterize the battery
- Custom Programming helps you monitor quality and performance
- Service Programs help you maintain the battery
-
Battery Analyzers, Battery Simulator, Rechargeable Batteries, Test & Measurement
C7400ER BATTERY ANALYZER (170 WATTS)
The Cadex C7400ER is the most powerful of the C7000 Series battery analyzers. Six amps per station, service of 36 volt batteries and 170 watts of continuous power satisfies most service requirements.
- Battery voltage range 1.2 to 36V (Li-ion)
- Charge/discharge current up to 6A per station
- Maximum charge power 75 watts per station
- Maximum discharge power 75 watts
-
Battery Analyzers, Battery Simulator, Rechargeable Batteries, Test & Measurement
C7400 BATTERY ANALYZER (80 WATTS)
With four-stations and 80 watts of charge power, the Cadex C7400 is most economical in terms of cost per station. The extra stations increase throughput and add flexibility in accommodating batteries that require immediate service.
- Battery voltage range 1.2 to 16V
- Charge/discharge current up to 4A per station
- Maximum charge power 55 watts per station
- Maximum discharge power 35 watts
-
Battery Analyzers, Battery Simulator, Rechargeable Batteries, Test & Measurement
C7200 BATTERY ANALYZER (40 WATTS)
The two-station Cadex C7200 suits smaller organizations and storefront operations. 40 watts of charge power at 4 amps per station ensure quick service of larger batteries. This economical analyzer offers similar features to the larger C7400.
- Battery voltage range 1.2 to 16V
- Charge/discharge current up to 4A per station
- Maximum charge power 40 watts per station
- Maximum discharge power 35 watts
-
Battery Analyzers, Battery Simulator, Battery Testers and Chargers, Rechargeable Batteries, Test & Measurement
C5100 POS BATTERY ANALYZER
Batteries are blamed for most cell phone problems. To satisfy the customer, batteries are replaced, often to have the fault recur. The Cadex C5100 battery analyzer assists by allowing to check the battery at storefront with a 30-second test.
Testing mobile phone batteries has never been so easy.
Deploying the C5100 in your store will:- Improve customer care
- Increase revenue and reduce costs
- Protect the environment by discarding fewer batteries
-
Battery Analyzers, Battery Testers and Chargers, Test & Measurement
UNIVERSAL CONDITIONING CHARGERS
CADEX UCC 1,2,6 bays
The Cadex Universal Conditioning Chargers (UCC) offer refinements usually not found on competitive chargers. The rugged design stands up to the critical demands of industrial users. Intelligent adapters allow simultaneous service of nickel-cadmium, nickel-metal-hydride and lithium-ion batteries on the same platform. A conditioning button conditions and calibrates batteries on demand, and a reverse-pulse charging prolongs battery life.
-
Arbitrary Output DC Power Supplies, Battery Analyzers, DC Power Supplies, Power Sources & Measurement, Rechargeable Batteries, Semiconductor Characterization Equipment, Semiconductor Source Measure Units, Test & Measurement
GS820 MULTI CHANNEL SOURCE MEASURE UNIT
The GS820 is equipped with two analog channels with each channel consisting of a constant voltage source VS, a constant current source IS, a voltmeter VM, and an ammeter IM. The two source measure channels are isolated.
- DC voltage/current reference, pulse voltage/current source
- V-I curve trace, semiconductor parametric test
- Programmable arbitrary waveform generation
- Electric load, resistance measurement
- Production test
-
Arbitrary Output DC Power Supplies, Battery Analyzers, DC Power Supplies, Power Sources & Measurement, Rechargeable Batteries, Semiconductor Characterization Equipment, Semiconductor Source Measure Units, Test & Measurement
GS610 SOURCE MEASURE UNIT
The GS610 is a highly accurate and highly functional programmable voltage/current source that incorporates voltage/current generation and measurement functions. The maximum output voltage and current are 110 V and 3.2 A, respectively. Evaluation of over a wide range of basic electrical characteristics is possible, because the GS610 can operate as a current source or a current sink.
-
DC Power Supplies, Power Sources & Measurement, Sensitive Measurements, Test & Measurement, Voltage/Current Sources and Measurement
GS200 DC VOLTAGE / CURRENT SOURCE
The GS200 is a low voltage/current DC source with high accuracy, high stability, and high resolution. With its excellent traceability, stability, and 5 1/2-digit resolution, the GS200 generates extremely low-noise DC voltage and current signals that are required for many applications. Additionally, the optional monitoring feature turns the GS200 into a voltage and current measuring instrument.
General Specifications - Voltage source up to ±32 V and current source up to ±200 mA
- 51/2-digit, 120000-count output resolution
- Voltage and current simple monitoring feature (optional)
- Programmable output up to 10,000 points
- Built-in USB mass storage device
- Channel expansion through synchronous operation
-
ATE Systems, LXIbus Instruments, Switching Systems, Test & Measurement
EX1200-6101 10 CHANNEL SP4T, 1.3 GHZ COAXIAL SWITCH, 50 Ω
- Highest density RF switches and matrices
- 50 W maximum switching power
- Can be mixed and matched to create application specific configurations
- Ideal for general purpose RF switching with high signal fidelity and total system bandwidths > 1 GHz
- No unterminated stub effects
- Excellent crosstalk and isolation specifications
-
ATE Systems, LXIbus Instruments, Switching Systems, Test & Measurement
EX1200-6216 DUAL (1X16), 1 GHZ RF MULTIPLEXER, 50 Ω
- Highest density RF switches and matrices
- 50 W maximum switching power
- Suitable for switching RF signals to/from high bandwidth measurement devices such as oscilloscopes and function generators
- Can be mixed and matched to create application specific configurations
- Coax shields are isolated from system ground to minimize ground loop effects
- No unterminated stub effects
-
ATE Systems, LXIbus Instruments, Switching Systems, Test & Measurement
EX1200-2001 20 CHANNEL 16 AMP FORM A (SPST) SWITCH
- Large switching capacity in a small footprint
- Switch up to 16 A current – highest in its class
- High breakdown voltage (1,000 V RMS between open contacts)
- Ideal for switching AC or DC power supplies and current sources
- Fail-safe interrupt inputs that can detect a fault condition automatically open up relays to their default state
-
ATE Systems, Digital Multimeters, LXIbus Instruments, Test & Measurement
EX1200-2365 FULL FEATURED, TIGHTLY INTEGRATED 6.5 DIGIT DMM FOR 3U EX1200 MAINFRAME
- Modular 6.5 digit DMM for 3U EX1200 mainframes (EX1208A)
- Tightly integrated into mainframe, allowing high-speed, synchronized scanning measurements without the need for external cabling.
- Input can be routed directly to the DMM or through an internal analog bus on the backplane
- Superfast scanning with no processor intervention required
- Scanning configuration can be saved in the DMM’s non-volatile memory allowing quick recall of saved states
- Integrating ADC with adjustable integration time depending on the level of accuracy required
- “True RMS” AC readings
- Supports frequency and temperature (thermocouple, RTD and thermistor) measurements
- PHONE : 949-955-1894
- Email :
-
ATE Systems, Digital Multimeters, LXIbus Instruments, Test & Measurement
EX1200-2165 FULL FEATURED, TIGHTLY INTEGRATED 6.5 DIGIT DMM FOR 1U EX1200 MAINFRAMES
- Modular 6.5 digit DMM for 1U EX1200 mainframes (EX1206A and EX1202A)
- Tightly integrated into mainframes, allowing high-speed, synchronized scanning measurements without the need for external cabling.
- Input can be routed directly to the DMM or through an internal analog bus on the backplane
- Superfast scanning with no processor intervention required
- Scanning configuration can be saved in the DMM’s non-volatile memory allowing quick recall of saved states
- Integrating ADC for with adjustable integration time depending on the level of accuracy required
- “True RMS” AC readings
- Supports frequency and temperature (thermocouple, RTD and thermistor) measurements
-
ATE Systems, LXIbus Instruments, Switching Systems, Test & Measurement
EX1200-2008H 30-CHANNEL 3 (1 X 10) HIGH-VOLTAGE MULTIPLEXER
- High-density, high-voltage multiplexer/scanner (1×180 in 1U size)
- Ideal for hipot, cable breakdown, source measure unit and power supply switching
- Extensive signal shielding employed on-board for excellent signal fidelity
- Break-before-make (BBM) and make-before-break (MBB) accomplished in hardware, considerably improving scanning time
- Fail-safe interrupts can detect fault conditions and automatically open up relays to a default state
-
ATE Systems, LXIbus Instruments, Switching Systems, Test & Measurement
EX1200-2007A 48-CHANNEL 1000V MULTIPLEXER
- Highest density module in its class for ability to switch signals up to 1000 V DC (up to 144 two-wire channels in 1U footprint)
- Built-in configuration relays expand the individual building blocks
- Ideal for hipot, cable breakdown, source measure unit and power supply switching
- Extensive signal shielding employed on-board for excellent signal fidelity
- Fail-safe interrupts can detect fault conditions and automatically open up relays to a default state
-
ATE Systems, Data Acquisition Systems, LXIbus Instruments, Test & Measurement
EX1202/EX1262 2-SLOT, HALF-RACK LXI SWITCHING AND DATA ACQUISITION MAINFRAMES
- ½ rack, 1U, 2-slot ,mainframe
- Internal 5-wire bus routes directly to optional full featured 6.5 digit DMM
- Modules plug in from the front – minimizes system wiring
- LXI communication interface eliminates platform obsolescence and support cost concern
- Tightly synchronized measurements in a distributed architecture using IEEE-1588
- 8-line LXI wired trigger bus – precision hardware handshaking
- Scalable from table-top to production system with ½ rack 1U, 1U, and 3U options
- Low cost-per-channel across a wide range of channel count
-
ATE Systems, Data Acquisition Systems, LXIbus Instruments, Switching Systems, Test & Measurement
EX1206A/EX1266 6-SLOT, 1U LXI SWITCHING AND DATA ACQUISITION MAINFRAMES
- 1U, 6-slot ,mainframe
- Internal 5-wire bus routes directly to optional full featured 6.5 digit DMM
- Modules plug in from the front – minimizes system wiring
- LXI communication interface eliminates platform obsolescence and support cost concern
- Tightly synchronized measurements in a distributed architecture using IEEE-1588
- 8-line LXI wired trigger bus – precision hardware handshaking
- Scalable from table-top to production system with ½ rack 1U, 1U, and 3U options
- Low cost-per-channel across a wide range of channel count
-
ATE Systems, Test & Measurement, VXIbus Instruments
VM3616A 16-CHANNEL, 16-BIT DAC/WAVEFORM GENERATOR
- 16 independent 16-bit D/A converters per instrument for high speed signal generation
- Up to 48 D/A converters per VXIbus C-Size slot
- ±20V and ±10V output ranges
- Up to 100 kSa/s Arbitrary Waveform Generation with internal programmable clock
- FIFO mode allows high-speed uninterrupted data output
- Data storage and scan lists speed testing
- Extensive triggering capability
- SCPI compatible
- VXIplu&play drivers
-
Test & Measurement, Timers/Counters/Analyzers, WiFi Solutions
WLn-LINK-OEM
WLn-LINK-OEM embedded module is a 2.4 / 5 GHz IEEE 802.1a/b/g/n solution designed to quickly and easily add wireless LAN to a wide range of wired Ethernet OEM products.
-
Test & Measurement, Timers/Counters/Analyzers, WiFi Solutions
RailBox Rugged & outdoor
RailBox is a rugged device designed for railway and light rail applications. It can be mounted in trains, subways, trams or in any equipment that requires robustness and mobility.
RailBox can be implemented by system integrators and rail vehicle manufacturers who are seeking to establish high availability for:
- uninterrupted train-to-trackside communications (CBTC, CCTV, VoIP, preventive maintenance, PIS…)
- carriage coupling (to support any train composition change and provide a redundant & reliable onboard network)
- reliable onboard vehicle network (WiFi onboard, train announcements, infotainment…)
The device relies on the multi-streams MIMO technology that contributes to an expanded coverage, higher data throughput and increased radio link reliability.
Furthermore it combines an optional LTE mobile broadband router plus a GPS allowing using the device as a mobile hotspot in transportation applications (coming soon).
It fulfills the most severe requirements in terms of operating environment: from -25°C to +70°C (extended :-40°C to +85°C), shock and vibration proof, protection against dust and water projections (IP66).
-
Calibration Instruments, Precision Instrumentation, Reference Time & Frequency, Test & Measurement, Timers/Counters/Analyzers
CNT-91 Frequency Timer/Counter/Analyzer/Calibrator Details
The CNT-90 Frequency Timer/Counter/Analyzer is excellent for measurement, analysis and calibration of frequency, time, or phase. In production test systems, R&D, the calibration lab, or in the field; the CNT-90 timer/counter/analyzer outperforms many existing counters on the market.
Fast Speed and High Resolution
The CNT-90 is a high-performance frequency counter with a fast measurement speed to 250,000 measurements/sec, with a memory depth of 750k to internal memory; high resolution of 100 ps single shot (time); and 12 digits/sec resolution (frequency). The CNT-90 offers ease-of-use, a multi-mode graphic/numeric display, and improved control over measurements, at a very competitive price.
-
Reference Time & Frequency, Timers/Counters/Analyzers
VersaSync Rugged GPS Time & Frequency Reference
Backed by more than four decades of Spectracom’s timing solutions expertise, VersaSync includes all the timing functionality required in modern, network-centric applications:
- NTP/PTP precise time transfer over Ethernet, including security protocols that prevent network vulnerabilities
- Low phase noise 10 MHz frequency distribution
- Configurable pulse signals, including IRIG or HaveQuick timecodes
- Serial link Time Of Day (ToD) messages
A Perfect Fit for GPS-Denied Environments
VersaSync accommodates an OCXO or a CSAC oscillator, allowing the unit to maintain frequency and time accuracy for long periods of GPS/GNSS outage. In addition, it can be re-synchronized by an external reference.
-
Distribution Time & Frequency, Reference Time & Frequency, Timers/Counters/Analyzers
SecureSync PTP Grandmaster
Equipped with the latest and most innovative 10/100/1000 Base-T Gigabit PTP Option Card on the market, the SecureSync High-Speed PTP Grandmaster Clock boasts industry-leading packet throughput and data processing power. The installment of an optional slave-ready 10/100 Mb PTP Option Card creates a powerful master-slave combination to satisfy even the most rigorous timing requirements.
Standard RF and fiber optic interfaces via SFP modules provide the ability to select between either of the two media relative to your specific needs, greatly reducing the effects of distance limitations within your system architecture.
-
ATE Systems, Test & Measurement, VXIbus Instruments
SVM2608 FOUR INDEPENDENT 100 KSA/S A/D CONVERTERS, SINGLE WIDE VME
- Four Independent 100kSa/s A/D Converters
- Option to Add Two Independent 20MSa/s A/D Converters
- On-Board FIFO for Streaming to Disk
- 1 MSa Memory per Channel for Burst Captures
- 2/4 Wire Resistance Measurements
- Robust Built-In Measurement Function
- VME 32/64
- Hermetically Sealed for Salt, Sand and Dust
-
ATE Systems, Test & Measurement, VXIbus Instruments
VM2710A 6.5 DIGIT DMM
- Auto-ranging 6.5 digit DMM
- DCV, ACV, DCI, ACI, 2- and 4-wire ohms
- Up to 2000 readings/sec over the backplane
- FIFO Memory for continuous measurements
- Two balanced differential isolated inputs
- Up to 256,000 readings of on-board memory
- Message or register data access
- Min/max, limit features, math (y=mX+b)
- High common mode rejection
- VXIplug&play drivers
-
ATE Systems, Test & Measurement, VXIbus Instruments
VM9000 VMIP BASE UNIT (HOLDS THREE INSTRUMENTS)
- Makes a single VXIbus card slot three times more powerful than single device solutions
- Designed for high performance instrumentation
- Open-platform, allowing product design with mixed or matched instruments provided by other suppliers
- Reduces the size and cost of test and data acquisition
-
ATE Systems, Test & Measurement, VXIbus Instruments
CT-310A 5-SLOT VXIBUS MAINFRAME (FOR RACK AND PORTABLE USE)
- Designed for portability and cost with small portable footprint
- Lightweight (under 22 lbs. including power supplies)
- Can house up to twelve VXIbus Instruments (VMIP™)
- Field-replaceable power supply and fan subassembly for low MTTR
- Remote isolated on/off control
- +5V and +12V are available for powering the UUT and other external devices
-
ATE Systems, Test & Measurement, VXIbus Instruments
CT-100C 6-SLOT VXIBUS MAINFRAME
- Cost-effective VXIbus Solution
- Enhanced monitoring capabilities including temperature and power monitoring
- Fault Output Signals Available on Rear Panel
- Removable Cover. Access to Instruments During Product Development or Instrument Calibration
- Adjustable Fan Speed
- Modular Fan/Power Supply Assembly Reduces MTTR
-
ATE Systems, Test & Measurement, VXIbus Instruments
EX2500A LXI-VXI GIGABIT ETHERNET SLOT-0 INTERFACE
- Up to 10 kM distance from PC to mainframe through fiberoptic interface
- 40 MB/s block transfer rates
- Embedded Web Interface provides interactive utility to control instruments
- Rack-Rack TTL trigger extension through on-board LXI Trigger Bus
- Backward compatibility with VXI 1.4 and 2.0 products
- External Clock In/Out with on-board options for TCXO/OCXO
- VXIplug&play compliant
-
AC Power Sources, Power Sources & Measurement, Test & Measurement
BL1350 AC Power Source
BL1350 AC Power Source, Frequency Converter
-
HDMI / Over IP Extender Systems, Multimedia, Pro AV Digital Systems
Cisco SG300-10P
10-PORT GIGABIT POE MANAGED SWITCH (PRE-CONFIGURED)
-
Bridges Capacitance, Precision Instrumentation, Test & Measurement
6622A Series -Direct Current Comparator Resistance Bridges
Resistance Measurement –Automatic DCC Resistance/Temperature Bridge
-
HDMI / HDBaseT Matrices &Extenders, Multimedia
500404 – HDMI / BI-IR EXTENDER KIT
The HDMI / Bi-IR Extender Kit allows HDMI equipment to be connected via one Cat 5e/6 unshielded twisted pair cables in a point-to-point configuration. The kit comes with one (1) Transmitter and one (1) Receiver as well as an IR Emitter and IR Sensor for remote control applications. Four (4) mounting Ear are also provided.
-
OSCILLOSCOPES, Osciloscopes, Power Analyzer, Power Sources & Measurement, Test & Measurement
PX8000 PRECISION POWER SCOPE
- Traditional power measurement instruments cannot provide accurate time measurements; oscilloscopes are not designed to measure power. The PX8000 is the world’s first precision power scope, bringing oscilloscope-style time-based measurement to the world of power measurement. It can capture voltage and current waveforms precisely, opening up applications and solutions for a huge variety of emerging power measurement problems.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT3000E PRECISION POWER ANALYZER
- Offering the world’s highest level of power measurement accuracy, the WT3000E provides engineers with a solution for testing and verifying Product Efficiency to the highest levels. Advanced and innovative measurement functions will benefit the engineer with electrical power measurements. It provides the measurement solutions necessary in the design and testing of the latest products such as Solar Inverters, Motor Drives, Lighting Systems, Uninterruptible Power Supplies, Transformer Testing, Aircraft Power Systems, and other power conversion devices.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT3000T PRECISION POWER ANALYZER TRANSFORMER VERSION
- The WT3000T (T for Transformer Version) is the world’s most accurate power analyser, ensuring high accuracy, precision and stability at very low power factors. With almost 100 years of experience and leadership in measurement, Yokogawa enables manufacturers to develop the next generation of transformers with lower life-cycle costs.
-
Power Analyzer, Test & Measurement
WT1800 HIGH PERFORMANCE POWER ANALYZER
- This new addition to Yokogawa’s highly recognized digital power analyzer product line offers innovative measurement functions which benefit the engineer with electrical power measurements. It is the ideal measurement solution for testing Product Efficiency, and the design of Inverters, Motor Drives, Lighting Systems, Uninterruptible Power Supplies, Aircraft Power Systems, Transformer Testing and other power conversion devices.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT500 MID-RANGE POWER ANALYZER
- The WT500 Power Analyzer is a Mid Range product for single-phase and three-phase power measurements. It is designed into a compact half-rack size chassis which can also be double rack mounted. Standard features include a color TFT display and USB interface for communications and memory. The instrument has a basic accuracy of 0.1%, maximum inputs of 1000 Vrms, 40 Arms and a measurement bandwidth of DC to 100 kHz.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
WT300E DIGITAL POWER METER
- The WT310E provides extremely low current measurement capability down to 50 micro-Amps, and a maximum of up to 26 Amps RMS. This instrument is ideal for engineers performing stand-by-power measurements, Energy Star®, SPECpower and IEC62301 / EN50564 testing, battery charger and other low-level power measurements.
-
Power Analyzer, Power Sources & Measurement, Test & Measurement
POWER QUALITY ANALYZER CW500
- The Yokogawa CW500 is a portable power meter that utilizes current clamp-on probes, navigation screens and quick start guides. These features enable user-friendly power consumption and power quality measurements in the field that conform to IEC61000-4-30 Class S.
-
Calibration Instruments, Precision Instrumentation, Test & Measurement
2558A AC VOLTAGE CURRENT STANDARD
- The 2558A is a low-cost, high-precision instrument capable of outputting a wide range of AC voltages and currents for the calibration of electric meters and other devices. In terms of accuracy and other performance characteristics, this new model is a significant upgrade from our previous model, the 2558 AC voltage current standard, which was introduced in 1979 and discontinued in 2003.
- Providing output ranges of 1.00 mV to 1200.0 Volts AC, and 1.00 mA to 60.00 Amps AC makes the 2558A the product of choice for the cost effective calibration of AC analog meters and other AC measuring instruments. Front panel controls and various computer interfaces enable the 2558A to be intuitively operated manually or controlled by an ATE system.
-
Calibration Instruments, Precision Instrumentation, Temperature & Humidity, Temperature Calibrator, Test & Measurement
2560A HIGH VOLTAGE AND HIGH CURRENT PRECISION DC CALIBRATOR
- The Model 2560A is a simple, precise and cost effective solution for calibrating DC measuring instruments such as analog meters, thermometers, temperature transmitters and data loggers
-
Calibration Instruments, Precision Instrumentation, Temperature & Humidity, Temperature Calibrator, Test & Measurement
2553A PRECISION DC CALIBRATOR
- The 2553A provides well used K,T,E,J, and an additional 6 types of thermocouples. These 10 types are all regulated in IEC. It also provides widely used Pt100 as an RTD. Resistance as well as temperature value can be set as an output value, enabling instrument calibration by both values.
-
Data Acquisition Systems, General Laboratory Instruments, Industrial Instruments, Paperless recorders, Test & Measurement
GP10/GP20 PAPERLESS RECORDER
Industrial processes and test laboratories require rigorous, continuous monitoring in the design, validation, and service stages of product development, product testing, and manufacturing. The GP series is Yokogawa’s latest laboratory recorder, with handle and footstands to enable portable and benchtop use.
The GP series is an industry-first multi-point touch panel, to improve intuitive and smart operator control. Users can scroll, pan, zoom historical data, and even write freehand messages on its dust-proof and water-proof display. It delivers industry leading reliability and measurement accuracy. The GP series is ideally suited for monitoring or troubleshooting long term physical or electrical trends.
Releasing SMARTDAC+ GX/GP Series Release 2 with FDA 21 CFR Part 11 Compliance and Custom Display
Main Features of SMARTDAC+ R2
- Support for FDA 21 CFR Part 11 for the food and drug industry (option)
- Expansion unit available to expand input channels of up to 450
- New Custom Display function (option) lets you place graphic images on screens
- Additional modules now available including a current input module and a DIDO module
- Support EtherNet/IP
- Option for easy connection with WT series power meters
- Front panel door available in white series only
-
Data Acquisition Systems, General Laboratory Instruments, Test & Measurement
MW100 DATA ACQUISITION UNIT
- The MW100 is a scalable, high performance data acquisition/data-logging platform designed for both PC-controlled and stand-alone operation under harsh operating conditions.
-
Data Acquisition Systems, General Laboratory Instruments, Test & Measurement
MX100 PC-BASED DATA ACQUISITION UNIT
- MX100 Style S3 New!
- 30-ch input module
- Windows Vista compatible
- Alarm levels increased from 2 to 4
- Multi-Channel Capability, High Isolation Voltage
- Multi-Interval Measurement
- Flexible System Configuration
- Versatile PC-Based Software Options
- Easy Software Setup
- No Re-Wiring between Measurements
- All-in-one “Quick Start Packages” with 10, 20, or 30 Channels
- MX100 Style S3 New!
-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701918 CURRENT PROBE 120 MHZ / 5 ARMS
- Frequency bandwidth: DC to 120 MHz
- Maximum continuous input range: 5 Arms
- Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.
-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701931 CURRENT PROBE 2 MHZ / 500 ARMS
- Frequency bandwidth: DC to 2 MHz
- Maximum continuous input range: 500 Arms
- Functions with Digital Oscilloscopes, Scopecorders and other waveform measuring instruments.
-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701930 CURRENT PROBE 10 MHZ / 150 ARMS
- Frequency bandwidth: DC to 10 MHz
- Maximum continuous input range: 150 Arms
Functions with Digital Oscilloscopes, Scopecorders or other waveform measuring instruments.
-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701932 CURRENT PROBE 100 MHZ / 30 ARMS
- Frequency bandwidth: DC to 100 MHz
Maximum continuous input range: 30 Arms
Functions with Digital Oscilloscopes, Scopecorders or other waveform measuring instruments.
- Frequency bandwidth: DC to 100 MHz
-
DATA ACQUISITION, Data Acquisition Systems, General Laboratory Instruments, OSCILLOSCOPES, Test & Measurement
SL1000 HIGH-SPEED DATA ACQUISITION UNIT
- The new Yokogawa SL1000 is the only data acquisition system that delivers independent, isolated channel hardware at 100MS/ch rates, with no compromise in bit resolution, memory depth, or streaming performance.
-
DATA ACQUISITION, Data Acquisition Systems, Dimension & Displacement, General Laboratory Instruments, OSCILLOSCOPES, Osciloscopes, RPM and Speed, Test & Measurement, Torque
DL850E/DL850EV SCOPECORDER
- Measure and analyze a wealth of signals in real-time and speed up development and fault finding.
- The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines the measurements of electrical signals, physical (sensors) and CAN/ LIN / SENT serial buses and is able to trigger on electrical power related and other calculations in real-time.
- New input modules and firmware are available!
- Three new input modules 720211, 720254, and 720243 are available to support a variety of applications.
-
OSCILLOSCOPES, Test & Measurement, VOLTAGE PROBES
700925 DIFFERENTIAL PROBE 1000V / 15 MHZ
- Frequency bandwidth: DC to 15 MHz Maximum continuous input range: 1000 Volts
- Attentuation Rations: 100:1 or 10:1
- Functions with Digital Oscilloscopes, ScopeCorders and other waveform measuring instruments.
-
OSCILLOSCOPES, Test & Measurement, VOLTAGE PROBES
701922 DIFFERENTIAL PROBE 20V / 200 MHZ
- The 701922 is a 10:1 Differential Probe rated at 20Vpeak differential voltage input and 60Vpeak Common-Mode input with 200MHz bandwidth (-3dB). This probe is recommended for CAN bus and can be used with virtuallly any oscillscope with an internal 50Ω termination or use the external 50Ω 700976. This probe is powered via a built in pig-tail LEMO lead. This probe can be powered with Yokogawa scope option /P2 or /P4, or an external power supply 700938-3-D or 701934-D. The probe is supplied with one each pinchers, B9852MF black and B9852MG red and a 50cm ground extension.
-
CURRENT PROBES, OSCILLOSCOPES, Test & Measurement
701933 CURRENT PROBE 50 MHZ / 30 ARMS
- Frequency bandwidth: DC to 50 MHz
- Maximum continuous input range: 30 Arms
- Functions with Digital Oscilloscopes, Scopecorders or other waveform measuring instruments.
-
OSCILLOSCOPES, Test & Measurement, VOLTAGE PROBES
700924 DIFFERENTIAL PROBE1400V / 100 MHZ
- Frequency bandwidth: DC to 100 MHz
- Maximum continuous input range: 1400 Volts
- Attenuation Ratios: 100:1 or 1000:1
- Functions with Digital Oscilloscopes, ScopeCorders or other waveform measuring instruments.
-
MEDS-P1900 -19″ Medical Panel PC
Revolutionary 19″ Medical Panel PC – The MEDS-P1900 is essential PC technology for busy hospital settings that demand workspace flexibility and the latest features to deliver and manage patient care. This all in one PC frees up space and can be mounted on a wall or medical cart to be used where needed: patient rooms,operating rooms.
-
Amplifier Wideband, Test & Measurement
High Voltage Multichannel Waveform Generators
High Voltage Multichannel Waveform Generator
The multichannel, high voltage, computer controlled Waveform Generator WFG600 is an exceptional instrument designed primarily for experiments on addressing liquid crystal devices and is most suitable for all applications where synchronized trains of pulses with variable width and amplitude are required.
-
-
PXIbus Instruments, Test & Measurement
CMX09
9-SLOT 3U PXIE HIGH PERFORMANCE RUGGED CHASSIS, UP TO 8 GB/S BANDWIDTH
-
Network Security Appliance, SOLUTIONS
CAR-5040
2U rackmount network security appliance, support Dual Intel® Haswell-EP processor & Wellsburg PCH chipset, up to 50 gigabit ethernet ports. Ideal platform for enterprise Internet Security, Access Control, WAN Optimization and Unified Threat Management.
-
Industrial Solution
Industrial grade devices are now used as the backbone communication networks in order to collect the data from the field and transfer data back and forth in the control room. Industrial Panel PC and display are considered important to provide flow monitoring and control for oil and gas gathering and production operations.
-
DN24L100-RKS1ML – Military grade 24″ display
MIL-DISPLAY MIL-DTL 38999/1 – Military grade display and panel PC are designed for use in extremely harsh environments and rough weather condition. This ultra-tough design was developed to survive both military and industrial applications. These systems are both MIL-STD 810F vibration and shock certification
-
Broadband High Voltage Linear Amplifiers
Amplifier model range
DC – 50Khz…..5MHz 70 Vpp…1600 Vpp 60mA….2A
-
DLM2000 MIXED SIGNAL OSCILLOSCOPE
The DLM2000 is a bench-top oscilloscope for electronic design or debug. It’s ergonomic and easy to use, and packed with features. With bandwidths from 200 to 500 MHz and memory from up to 250 Mpoints, you can be certain there is a DLM2000 to meet your application and budget. With the DLM2000’s industry first “flexible MSO input”, you can choose to activate channel four as an analog input, or use it to acquire 8 bits of logic instead. Modern electronics include analog and digital circuitry—and the DLM2000’s flexible MSO input lets you measure both, including mixed signal triggers and decoding of parallel or serial bit patterns.
-
OSCILLOSCOPES, Osciloscopes, Test & Measurement
DLM4000 MIXED SIGNAL OSCILLOSCOPE
The DLM4000 is a unique to the industry eight-channel mixed-signal oscilloscope suitable to test and debugging applications in the embedded systems, power electronics, mechatronics, and automotive sectors. Available in both 350 MHz and 500 MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels. The eighth input channel features Flex MSO which converts to a 8-bit logic analyzer at the push of a button; add sixteen additional logic analyzer inputs as an option, for 24-bit logic analysis. Advanced measurement and analysis features such as power analysis and serial-bus analysis, digital filtering, user-defined math, and super-long record lengths (up to 250 Mega Points) make the DLM4000 a super powerful engineering tool. High-resolution 12.1-inch LCD display, compact landscape format, ergonomic and friendly user-interface make it easy to use.
-
Precision Instrumentation, Test & Measurement
Precision Temperature Control for TECs
The 2510 and 2510-AT TEC SourceMeter SMU instruments ensure tight temperature control for laser diode modules during test by controlling the operation of a laser diode module’s Thermo-Electric Cooler (TEC.) The 2510-AT offers an autotuning capability with which P, I, and D (proportional, integral, and derivative) values for closed loop temperature control are determined using a modified Zeigler-Nichols algorithm, eliminating the need to determine optimal values for these coefficients experimentally.
-
-
MPC-5000 – Mission Computer
MPC-5000 Multi-Platform Mission Computer 9-slot 3U VPX System.
Multi Platform Mission Computer for airborne application, airborne systems,
network servers and NAS, for Map and process used in the avionic world.
